Is F0080 Polyester Braided Thermoplastic Hose suitable for transferring fuels and operating reliably at temperatures down to -40°C?

Yes. F0080 Polyester Braided Thermoplastic Hose is suitable for transferring fuels and will operate reliably down to -40°C. Its construction—polyester inner layer with polyester braid reinforcement and a micro-perforated polyurethane outer cover—makes it appropriate for safe fuel transfer. The specified operating temperature range of -40°C to +93°C confirms reliable performance at -40°C. Note: for water and air applications, the upper temperature limit is +65°C, but that does not affect fuel use at low temperatures.

Can F0080 Polyester Braided Thermoplastic Hose be used for high-pressure hydraulic oil systems at working pressures of 110–130 bar across all diameters?

F0080 Polyester Braided Thermoplastic Hose can be used in high-pressure hydraulic oil systems at working pressures of 110–130 bar only if the selected hose diameter is rated for that specific working pressure. The product description states it is designed to handle working pressures ranging from 110 to 130 bar depending on the diameter, so not all diameters necessarily achieve the upper end of that range. Before selection and installation, verify the exact working pressure rating for the required diameter from the manufacturer’s datasheet or technical table and confirm compatibility with hydraulic oil, fittings, and system temperature limits (-40°C to +93°C; note reduced limit to +65°C for water and air). Also ensure proper safety factors, assembly procedures, and periodic inspection for mechanical wear and abrasion.

Hose thermoplastic with a polyester braid F0080

All products, Thermoplastic hoses/

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	93
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Light, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. Inner layer: polyester. Reinforcement: a polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 110 bar to 130 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MC-F0080B-05	Hose thermoplastic F0080B 3/16"	5	130	In stock	Enquiry
MC-F0080C-06	Hose thermoplastic F0080C 1/4"	6	130	In stock	Enquiry
MC-F0080D-08	Hose thermoplastic F0080D 5/16"	8	120	In stock	Enquiry
MC-F0080E-10	Hose thermoplastic F0080E 3/8"	10	120	In stock	Enquiry
MC-F0080F-13	Hose thermoplastic F0080F 1/2"	12	110	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Light, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. Inner layer: polyester. Reinforcement: a polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 110 bar to 130 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).