Polyethylene hose for utility water and drinking water LLDPE

Additional information

Material

PE – polyethylene

Maximum operating temperature [°C]

65

Minimum operating temperature [°C]

0

Standard length [m]

100, 150, 75

A light and flexible LLDPE (linear low-density polyethylene) hose designed for cold and periodically hot domestic water as well as for drinking water. LLDPE is stronger than traditional low- or medium-density polyethylene and is recommended for use with water. Typical applications include water purification and filtration systems, water treatment installations, ice-making machines, misting installations in catering and industry. May be used for drinking water in accordance with the relevant certificates. Not recommended for mineral oil, fuels and gases, or for compressed air installations at a pressure higher than 10 bar (20°C). For water, the maximum chlorine content is 4 ppm; higher values may shorten the service life of the hoses. The calibrated outer diameter allows connection to the installation using push-in fittings. Standards and requirements: Food industry, food contact: meets European food contact requirements 1935/2004/EC and 10/2011/EU (simulant liquids A, C and D1), 2023/2006/EC (GMP), as well as American NSF-51 hygiene requirements. Drinking water approvals: PZH (no. B.BK.60110.1534.2023, certificate valid until 16.11.2026), KTW, UBA, BfR (German requirements), as well as WRAS, NSF 4.1 (British) and NSF-61 (American). Hose material: polyethylene (LLDPE). Hardness: 55 ÷ 60 Shore (D). Working pressure: from 10 bar to 16 bar, depending on hose diameter. Operating temperature: from 0°C to +65°C (working pressure depends on temperature).

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
JG-PE-04025-BPolyethylene hose LLDPE 4x2.5 mm, blue316In stock0 €
Enquiry
JG-PE-04025-NPolyethylene hose LLDPE 4x2.5 mm316In stock0 €
Enquiry
JG-PE-0604-BPolyethylene hose LLDPE 6x4 mm, blue416In stock0 €
Enquiry
JG-PE-0604-NPolyethylene hose LLDPE 6x4 mm416In stock0 €
Enquiry
JG-PE-08-BI-BPolyethylene hose LLDPE 1/4" (6.35x4.32 mm), blue16In stock0 €
Enquiry
JG-PE-08-BI-NPolyethylene hose LLDPE 1/4" (6.35x4.32 mm)16In stock0 €
Enquiry
JG-PE-0806-BPolyethylene hose LLDPE 8x6 mm, blue610In stock0 €
Enquiry
JG-PE-0806-NPolyethylene hose LLDPE 8x6 mm610In stock0 €
Enquiry
JG-PE-10-CI-BPolyethylene hose LLDPE 5/16" (7.94x4.75 mm), blue16In stock0 €
Enquiry
JG-PE-10-CI-NPolyethylene hose LLDPE 5/16" (7.94x4.75 mm)16In stock0 €
Enquiry
JG-PE-1007-BPolyethylene hose LLDPE 10x7 mm, blue816In stock0 €
Enquiry
JG-PE-1007-NPolyethylene hose LLDPE 10x7 mm816In stock0 €
Enquiry
JG-PE-12-EI-BPolyethylene hose LLDPE 3/8" (9.53x6.35 mm), blue16In stock0 €
Enquiry
JG-PE-12-EI-NPolyethylene hose LLDPE 3/8" (9.53x6.35 mm)16In stock0 €
Enquiry
JG-PE-1209-BPolyethylene hose LLDPE 12x9 mm, blue1010In stock0 €
Enquiry
JG-PE-1209-NPolyethylene hose LLDPE 12x9 mm1010In stock0 €
Enquiry
JG-PE-16-GI-BPolyethylene hose LLDPE 1/2" (12.7x9.53 mm), blue10In stock0 €
Enquiry
JG-PE-16-GI-NPolyethylene hose LLDPE 1/2" (12.7x9.53 mm)10In stock0 €
Enquiry

Do you need a larger quantity of products or a bespoke quote?

A light and flexible LLDPE (linear low-density polyethylene) hose designed for cold and periodically hot domestic water as well as for drinking water. LLDPE is stronger than traditional low- or medium-density polyethylene and is recommended for use with water. Typical applications include water purification and filtration systems, water treatment installations, ice-making machines, misting installations in catering and industry. May be used for drinking water in accordance with the relevant certificates. Not recommended for mineral oil, fuels and gases, or for compressed air installations at a pressure higher than 10 bar (20°C). For water, the maximum chlorine content is 4 ppm; higher values may shorten the service life of the hoses. The calibrated outer diameter allows connection to the installation using push-in fittings. Standards and requirements: Food industry, food contact: meets European food contact requirements 1935/2004/EC and 10/2011/EU (simulant liquids A, C and D1), 2023/2006/EC (GMP), as well as American NSF-51 hygiene requirements. Drinking water approvals: PZH (no. B.BK.60110.1534.2023, certificate valid until 16.11.2026), KTW, UBA, BfR (German requirements), as well as WRAS, NSF 4.1 (British) and NSF-61 (American). Hose material: polyethylene (LLDPE). Hardness: 55 ÷ 60 Shore (D). Working pressure: from 10 bar to 16 bar, depending on hose diameter. Operating temperature: from 0°C to +65°C (working pressure depends on temperature).

Additional information

Material

PE – polyethylene

Maximum operating temperature [°C]

65

Minimum operating temperature [°C]

0

Standard length [m]

100, 150, 75

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?