A fitting TRI-CLAMP with self-clamping spigot under tube with plastic PP, PVDF, series 3C type EM

Additional information

Material

P – material (plastic)

A fitting straight TRI-CLAMP with self-clamping spigot for hose series 3C type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. A fitting Tri-Clamp (Triclover) made is in accordance with standards DIN 32676, ISO 2852 and BS 4825. supplied without the gasket, which depending on medium should order separately. the gasket available are with material made with EPDM, FKM, Gylon® and PTFE. spigot whereas intended is for rigid hoses and tubes made with fluoropolymers PTFE, FEP, PFA, tubes glass and metal, for tubes polyamide (PA) and tubes made with polyethylene (PE). locking hose/tubes in connector occurs using ring cutting and a nut. sealing connections ensures ring with PTFE. solution to eliminates reducers cross-section hose, co in effect not affects on Flow rate media. Material: polypropylene, PVDF. Working pressure: 6 bar.

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
EM-3C100PN250640PVFitting TRI-CLAMP (3C series) 25 mm, for tube 6 mm (2N), PVDF-6In stock0 €
Enquiry
EM-3C100PN250643PPFitting TRI-CLAMP (3C series) 25 mm, for tube 8 mm (2N), polypropylene-6In stock0 €
Enquiry
EM-3C100PN250643PVFitting TRI-CLAMP (3C series) 25 mm, for tube 8 mm (2N), PVDF-6In stock0 €
Enquiry
EM-3C100PN250645PPFitting TRI-CLAMP (3C series) 25 mm, for tube 10 mm (2N), polypropylene-6In stock0 €
Enquiry
EM-3C100PN250645PVFitting TRI-CLAMP (3C series) 25 mm, for tube 10 mm (2N), PVDF-6In stock0 €
Enquiry
EM-3C100PN250648PPFitting TRI-CLAMP (3C series) 25 mm, for tube 12 mm (2N), polypropylene-6In stock0 €
Enquiry
EM-3C100PN250648PVFitting TRI-CLAMP (3C series) 25 mm, for tube 12 mm (2N), PVDF-6In stock0 €
Enquiry
EM-3C100PN341643PPFitting TRI-CLAMP (3C series) 34 mm, for tube 8 mm (2N), polypropylene-6In stock0 €
Enquiry
EM-3C100PN341645PPFitting TRI-CLAMP (3C series) 34 mm, for tube 10 mm (2N), polypropylene-6In stock0 €
Enquiry
EM-3C100PN341648PPFitting TRI-CLAMP (3C series) 34 mm, for tube 12 mm (2N), polypropylene-6In stock0 €
Enquiry
EM-3C100PN341648PVFitting TRI-CLAMP (3C series) 34 mm, for tube 12 mm (2N), PVDF-6In stock0 €
Enquiry
EM-3C100PN502643PVFitting TRI-CLAMP (3C series) 50.5 mm, for tube 8 mm (2N), PVDF-6In stock0 €
Enquiry
EM-3C100PN502645PVFitting TRI-CLAMP (3C series) 50.5 mm, for tube 10 mm (2N), PVDF-6In stock0 €
Enquiry
EM-3C100PN502648PPFitting TRI-CLAMP (3C series) 50.5 mm, for tube 12 mm (2N), polypropylene-6In stock0 €
Enquiry
EM-3C100PN502648PVFitting TRI-CLAMP (3C series) 50.5 mm, for tube 12 mm (2N), PVDF-6In stock0 €
Enquiry
EM-3C100PN502651PVFitting TRI-CLAMP (3C series) 50.5 mm, for tube 14 mm (2N), PVDF-6In stock0 €
Enquiry
EM-3C100PN502652PVFitting TRI-CLAMP (3C series) 50.5 mm, for tube 15 mm (2N), PVDF-6In stock0 €
Enquiry
EM-3C100PN502653PPFitting TRI-CLAMP (3C series) 50.5 mm, for tube 16 mm (2N), polypropylene-6In stock0 €
Enquiry
EM-3C100PN502655PVFitting TRI-CLAMP (3C series) 50.5 mm, for tube 18 mm (2N), PVDF-6In stock0 €
Enquiry
EM-3C100PN502657PPFitting TRI-CLAMP (3C series) 50.5 mm, for tube 20 mm (2N), polypropylene-6In stock0 €
Enquiry

Do you need a larger quantity of products or a bespoke quote?

A fitting straight TRI-CLAMP with self-clamping spigot for hose series 3C type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. A fitting Tri-Clamp (Triclover) made is in accordance with standards DIN 32676, ISO 2852 and BS 4825. supplied without the gasket, which depending on medium should order separately. the gasket available are with material made with EPDM, FKM, Gylon® and PTFE. spigot whereas intended is for rigid hoses and tubes made with fluoropolymers PTFE, FEP, PFA, tubes glass and metal, for tubes polyamide (PA) and tubes made with polyethylene (PE). locking hose/tubes in connector occurs using ring cutting and a nut. sealing connections ensures ring with PTFE. solution to eliminates reducers cross-section hose, co in effect not affects on Flow rate media. Material: polypropylene, PVDF. Working pressure: 6 bar.

Additional information

Material

P – material (plastic)

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?