Is the CAMLOCK F Connector Plug with Male Thread, Polypropylene compatible with both BSPT and NPT threaded fittings?

The CAMLOCK F Connector Plug with Male Thread, Polypropylene is produced with external BSPT or NPT threads, so it is compatible with both BSPT and NPT threaded fittings. Its manufacture to MIL-C-27487 (A-A-59326) and standardized design ensure correct mating and reliable performance with either thread type, provided the matching female fitting uses the same thread standard (BSPT to BSPT or NPT to NPT). Mixing BSPT and NPT threads is not recommended due to differing thread form and taper, which can cause leaks or improper sealing.

Can the CAMLOCK F Connector Plug with Male Thread, Polypropylene withstand continuous exposure to petrochemical fluids without degradation?

The CAMLOCK F Connector Plug with Male Thread, Polypropylene is formulated from polypropylene reinforced with fiberglass and is specifically described as resistant to chemical agents and widely used in the petrochemical sector. This construction provides good chemical resistance and mechanical strength under typical service conditions. With a working pressure up to 7 bar (size-dependent) and compliance with MIL-C-27487 (A-A-59326), it is designed for secure, leak-free performance in demanding industrial environments. However, continuous exposure to specific petrochemical fluids can vary widely in aggressiveness (aromatics, chlorinated solvents, strong acids/alkalis, hydrocarbon mixtures at elevated temperature, etc.). Fiberglass-reinforced polypropylene offers excellent resistance to many hydrocarbons and common petrochemical products at normal temperatures, but may degrade over time when exposed continuously to highly aggressive solvents, high temperatures, or strong oxidizers. Compatibility also depends on concentration, temperature, mechanical stress, and exposure duration. Conclusion: The CAMLOCK F Connector Plug with Male Thread, Polypropylene is suitable for many petrochemical applications and offers strong chemical resistance, but for continuous exposure to specific petrochemical fluids—especially aggressive solvents or high-temperature services—confirm compatibility with the fluid, temperature and pressure conditions (preferably via chemical compatibility charts or manufacturer validation) before long-term use.

CAMLOCK F Connector Plug with Male Thread, Polypropylene

Additional information

Material	P – material (plastic)
Standard length [m]	120

The CAMLOCK F connector plug with external BSPT or NPT thread is manufactured in compliance with the American military standard MIL-C-27487 (A-A-59326), ensuring reliability and precision in demanding industrial applications. Designed as a highly efficient transfer connection, it is widely implemented in the petrochemical sector, where safety and durability are essential. With a working pressure of up to 7 bar, depending on the connector size, this solution guarantees secure and leak-free performance even under intensive operating conditions. Produced from polypropylene reinforced with fiberglass, the connector combines exceptional strength with resistance to chemical agents, making it a long-lasting and cost-effective choice. Its robust construction and standardized design allow for quick installation and easy integration into existing systems, reducing downtime and optimizing workflow. This makes the CAMLOCK F plug an ideal component for companies seeking dependable, high-performance connections that meet international standards and deliver consistent results in critical environments.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
AC-F-050-P	CAMLOCK F 3/4" connector, GZ 1/2" polypropylene	-	5
AC-F-050-PX	CAMLOCK F 1/2" connector, polypropylene	-	5
AC-F-075-P	CAMLOCK F 3/4" polypropylene connector	-	7
AC-F-075-PX	CAMLOCK F 3/4" connector, polypropylene	-	7
AC-F-100-200-P	CAMLOCK F 1" connector with GZ 2" BSP, polypropylene	-	7
AC-F-100-P	CAMLOCK F 1" polypropylene connector	-	7
AC-F-100-PX	CAMLOCK F 1" connector, polypropylene	-	7
AC-F-125-125-P	CAMLOCK F 1.1/4" connector, GZ 1.1/4" polypropylene	-	7
AC-F-125-150-P	CAMLOCK F 1.1/2", GZ 1.1/4" polypropylene connector	-	7
AC-F-125-P	CAMLOCK F 1" connector, GZ 1.1/4" polypropylene	-	7
AC-F-150-P	CAMLOCK F 1.1/2" polypropylene connector	-	7
AC-F-150-PX	CAMLOCK F 1.1/2" connector, polypropylene	-	7
AC-F-200-P	CAMLOCK F 2" polypropylene connector	-	7
AC-F-200-PX	CAMLOCK F 2" connector, polypropylene	-	7
AC-F-300-P	CAMLOCK F 3" polypropylene connector	-	4
AC-F-300-PX	CAMLOCK F 3" connector, polypropylene	-	4
AC-F-400-P	CAMLOCK F 4" polypropylene connector	-	4
AC-F-400-PX	CAMLOCK F 4" connector, polypropylene	-	4

The CAMLOCK F connector plug with external BSPT or NPT thread is manufactured in compliance with the American military standard MIL-C-27487 (A-A-59326), ensuring reliability and precision in demanding industrial applications. Designed as a highly efficient transfer connection, it is widely implemented in the petrochemical sector, where safety and durability are essential. With a working pressure of up to 7 bar, depending on the connector size, this solution guarantees secure and leak-free performance even under intensive operating conditions. Produced from polypropylene reinforced with fiberglass, the connector combines exceptional strength with resistance to chemical agents, making it a long-lasting and cost-effective choice. Its robust construction and standardized design allow for quick installation and easy integration into existing systems, reducing downtime and optimizing workflow. This makes the CAMLOCK F plug an ideal component for companies seeking dependable, high-performance connections that meet international standards and deliver consistent results in critical environments.