Is the R7 Anti-Abrasion Synthetic Braided Thermoplastic Hose suitable for both hydraulic oil systems and compressed air applications across its full temperature range?

R7 Anti-Abrasion Synthetic Braided Thermoplastic Hose is suitable for hydraulic oil systems across its full stated temperature range (-40°C to +100°C). For compressed air and water applications the hose is suitable but with a reduced maximum temperature of +70°C; within that limit it meets required standards and provides safe, reliable performance.

Can the R7 Anti-Abrasion Synthetic Braided Thermoplastic Hose be used for fuel transfer and water-based fluids at its maximum working pressures across all diameters?

Yes — the R7 Anti-Abrasion Synthetic Braided Thermoplastic Hose can be used for fuel transfer and water-based fluids at its specified maximum working pressures, but with an important caveat: maximum allowable pressure depends on diameter. The hose is rated to operate from 70 bar up to 210 bar depending on diameter and is manufactured to SAE 100R7 / EN855-R7 / ISO 3949-R7 standards, making it suitable for fuels and water-based media. However, note the temperature limit for water and air is reduced to +70°C; ensure your application’s pressure and temperature conditions for the selected diameter do not exceed the hose’s specific working pressure and temperature ratings.

Hose thermoplastic with a synthetic braid R7 ANTIABRASION

All products, Thermoplastic hoses/

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Light, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 210 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TO-R7-04	Hose R7 ANTIABRASION 5/32"	4	210	In stock	Enquiry
TO-R7-05	Hose R7 ANTIABRASION 3/16"	5	210	In stock	Enquiry
TO-R7-06	Hose R7 ANTIABRASION 1/4"	6	210	In stock	Enquiry
TO-R7-08	Hose R7 ANTIABRASION 5/16"	8	190	In stock	Enquiry
TO-R7-10	Hose R7 ANTIABRASION 3/8"	10	160	In stock	Enquiry
TO-R7-13	Hose R7 ANTIABRASION 1/2"	12	140	In stock	Enquiry
TO-R7-16	Hose R7 ANTIABRASION 5/8"	16	105	In stock	Enquiry
TO-R7-19	Hose R7 ANTIABRASION 3/4"	20	90	In stock	Enquiry
TO-R7-25	Hose R7 ANTIABRASION 1"	25	70	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Light, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 210 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).