Is the RB35 polypropylene water gun with 1/2" BSP swivel connector safe for use at temperatures up to +50°C and pressures up to 12 bar in food-processing environments?

Yes. The RB35 polypropylene water gun with 1/2" BSP swivel connector is specified for safe use in food‑processing environments at temperatures up to +50°C and pressures up to 12 bar. Its polypropylene reinforced with fiberglass construction, brass valve piston, and Viton sealing deliver chemical and temperature resistance and leak‑free operation; soft rubber protective rings and an integrated trigger guard protect the unit from impact and accidental flow. The gun’s maximum working pressure of 12 bar, operating temperature limit of +50°C, and flow characteristics (30 l/min at 5 bar; up to 50 l/min at maximum capacity) make it suitable for intensive cleaning tasks while meeting hygiene and durability needs in professional food‑processing settings.

Can the RB35 polypropylene water gun with 1/2" BSP swivel connector be safely sanitized with common food-industry disinfectants without damaging the Viton seals or polypropylene body?

Yes. The RB35 polypropylene water gun with 1/2" BSP swivel connector can be safely sanitized with common food‑industry disinfectants, provided standard compatibility and usage limits are observed. Why: the body is high‑quality polypropylene reinforced with fiberglass, a material with good chemical resistance to typical food‑grade sanitizers (chlorine solutions, quaternary ammonium compounds, peracetic acid at normal concentrations, and alcohol‑based cleaners). The seals are Viton (FKM), which is broadly resistant to a wide range of disinfectants, heat (serviceable up to +50°C as stated), and pressurized washdown (max 12 bar). Precautions: - Use disinfectant concentrations and temperatures within manufacturer recommendations for both the disinfectant and the RB35 (do not exceed +50°C). - Avoid prolonged exposure to highly aggressive chemistries outside typical food‑industry use (e.g., strong caustics or concentrated oxidative acids for extended periods) without confirming chemical compatibility. - Rinse thoroughly after chemical exposure if residues could affect product contact or degrade components over time. - Inspect seals and valve components regularly for wear or swelling and replace Viton seals if any degradation appears. - Follow the disinfectant maker’s compatibility data and your facility’s sanitation protocols. Following these guidelines, routine sanitation with common food‑industry disinfectants should not damage the RB35 polypropylene water gun body or Viton seals.

Water gun RB35 with female thread 1/2″ BSP swivel, polypropylene

All products, Low-pressure water spray guns/

Additional information

Light, plastic Water gun for industry food. made with plastic (polypropylene with fiber glass), piston valve – brass, sealing – Viton. equipped in rings protective with soft rubber. has smooth adjustment flow. Bow cover trigger protects against uncontrolled opening stream water and against damage. maximum Working pressure: 12 bar. Maximum Operating temperature: +50°C. Flow rate: 30 l/min (5 bar), max. 50 l/min.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
PR-RB35	Gun for water RB35, Coupling swivel 1/2" female, polypropylene/glass fibre	-	12	In stock	0 €		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Light, plastic Water gun for industry food. made with plastic (polypropylene with fiber glass), piston valve – brass, sealing – Viton. equipped in rings protective with soft rubber. has smooth adjustment flow. Bow cover trigger protects against uncontrolled opening stream water and against damage. maximum Working pressure: 12 bar. Maximum Operating temperature: +50°C. Flow rate: 30 l/min (5 bar), max. 50 l/min.