Does the Slim Flat Nozzle with Coolant Holes, 1/4" LOC-LINE® System fit existing 1/4" LOC-LINE® coolant hose setups and require any adapters?

Yes. The Slim Flat Nozzle with Coolant Holes, 1/4" LOC-LINE® System is designed specifically for the LOC-LINE® 1/4" coolant hose system and fits existing 1/4" LOC-LINE® setups without requiring adapters. Made from durable acetal and rated to 3 bar and +76°C, it installs easily into standard 1/4" LOC-LINE® fittings to provide an even, precise coolant spray via its 5 or 7 precision-drilled holes (Ø 1.5 mm or Ø 1 mm).

Can the Slim Flat Nozzle with Coolant Holes, 1/4" LOC-LINE® System handle abrasive coolants or require special maintenance to prevent clogging?

Slim Flat Nozzle with Coolant Holes, 1/4" LOC-LINE® System: Yes — but with caveats. The nozzle is made from durable acetal and its 1.5 mm or 1.0 mm precision-drilled holes and multi-hole flat design provide good wear resistance and even coolant distribution. However, abrasive coolants or coolants with high solid content can accelerate wear of the small-diameter holes and increase the risk of clogging over time. To ensure reliable operation: - Use filtered or settled coolant to reduce particulate load. - Install an inline strainer or filter upstream to capture solids larger than the hole diameter. - Implement regular inspection and cleaning of the nozzle (blow out with compressed air or flush with clean coolant). - Replace nozzles that show wear or enlarged/clogged holes to maintain spray pattern and cooling efficiency. With proper filtration and routine maintenance, the Slim Flat Nozzle will perform well even in tougher shop conditions; without those precautions, abrasive fluids can shorten service life and cause blockages.

Nozzle flat narrow with holes for coolant, system 1/4″, LOC-LINE®

Air and water hoses, All products/

Additional information

Nozzle flat narrow with holes (5 or 7 holes) o diameter Ø 1.5 mm or Ø 1 mm for hoses for coolant LOC-LINE® – system 1/4″. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
LL-49453	Nozzle flat with holes 5x1.5 mm (system 1/4")	-	3	In stock	0 €		Enquiry
LL-49454	Nozzle flat with holes 7x1 mm (system 1/4")	-	3	In stock	0 €		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Nozzle flat narrow with holes (5 or 7 holes) o diameter Ø 1.5 mm or Ø 1 mm for hoses for coolant LOC-LINE® – system 1/4″. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.