Hose PTFE and antistatic in double braid steel AISI 304, SMOOTHBORE SWDB
Hose made is with smooth, seamless tube with PTFE. PTFE tube hose extruded is in strictly defined and controlled conditions, co ensures jej highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. braid made is with annealed wire of steel stainless AISI 304 o high strength on stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose under high pressure. double braid whereas, should use at higher pressures and tam, where occurs (in permissible limits) greater bending or kinking hose. Due to unique properties PTFE (large range temperatures use, resistance to most substances and compounds chemical, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water etc. – as well as for classic installation high-pressure oil hydraulic. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1, if required is factor 4:1 (e.g. acc. to EN 16643) should multiply value through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% on each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-SWDB-08 is: 250 bar – (170°C-130°C) x 0.75 = 250 bar – 30% = 175 bar. The value “Wall thickness” given in the Technical data refers to the PTFE layer. Hose material: smooth PTFE (teflon). Reinforcement: double braid of steel AISI 304. Working pressure: from 70 bar to 360 bar – depending on the diameter hose. Operating temperature: od -70°C up to +260°C.
List of product variants
Do you need a larger quantity of products or a bespoke quote?
Hose made is with smooth, seamless tube with PTFE. PTFE tube hose extruded is in strictly defined and controlled conditions, co ensures jej highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. braid made is with annealed wire of steel stainless AISI 304 o high strength on stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose under high pressure. double braid whereas, should use at higher pressures and tam, where occurs (in permissible limits) greater bending or kinking hose. Due to unique properties PTFE (large range temperatures use, resistance to most substances and compounds chemical, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water etc. – as well as for classic installation high-pressure oil hydraulic. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1, if required is factor 4:1 (e.g. acc. to EN 16643) should multiply value through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% on each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-SWDB-08 is: 250 bar – (170°C-130°C) x 0.75 = 250 bar – 30% = 175 bar. The value “Wall thickness” given in the Technical data refers to the PTFE layer. Hose material: smooth PTFE (teflon). Reinforcement: double braid of steel AISI 304. Working pressure: from 70 bar to 360 bar – depending on the diameter hose. Operating temperature: od -70°C up to +260°C.
Additional information
| Material | PTFE – teflon and similar |
|---|---|
| Maximum operating temperature [°C] | 260 |
| Minimum operating temperature [°C] | -70 |
| Vacuum resistance | no |
| Standard length [m] | 10, 10.5, 40, 50, 60/ 120 |
| Reinforcement | 2 steel braids |















