Is the MTBH1 Steel Braided Dual Thermoplastic Hose available in a micro-perforated version for compressed air and gases?

Yes. The MTBH1 Steel Braided Dual Thermoplastic Hose can be supplied in a micro-perforated version suitable for gases and compressed air. The hose features two integrated lines with a welded outer layer, a polyester inner layer, steel braid reinforcement and a polyurethane outer cover. It offers working pressures from 190 to 325 bar (depending on diameter) and operates from -40°C to +100°C (up to +70°C with water or air).

Can the MTBH1 Steel Braided Dual Thermoplastic Hose be used for high-pressure hydraulic oil and fuel transfer across its full temperature range?

Yes — the MTBH1 Steel Braided Dual Thermoplastic Hose can be used for high-pressure hydraulic oil and fuel transfer across its full specified temperature range, with the following caveats: - Pressure suitability: Working pressures range from 190 to 325 bar depending on diameter, which covers typical high‑pressure hydraulic and fuel transfer needs. Confirm your system’s maximum operating and surge pressures fall within the hose’s rated pressure for the chosen diameter. - Temperature suitability: The hose is rated for -40°C to +100°C for hydraulic oil and fuel applications, so it supports the full stated temperature range for those media. Note that for water or air applications the upper limit is +70°C. - Construction and compatibility: The inner polyester layer, steel braid reinforcement and polyurethane cover provide strength, wear and environmental resistance appropriate for hydraulic oil and fuel. Still verify chemical compatibility of polyurethane and polyester with specific fuels or hydraulic fluids used (e.g., biofuels, additives). - Application notes: Ensure correct fittings, installation practices, and allowance for thermal expansion and flexing. For micro‑perforated or gas/air service, use the appropriate variant. In summary: yes, provided you select the correct diameter (to meet the 190–325 bar rating), confirm fluid compatibility, and follow proper installation and pressure/temperature limits.

Hose thermoplastic double with a steel braid MTBH1

All products, Thermoplastic hoses/

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Light, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, fuels, liquids based on water. on request micro-perforated (for gases and air). Inner layer: polyester. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 325 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ZC-MTBH1-05	Hose thermoplastic MTBH1 2x3/16"	5	325	In stock	Enquiry
ZC-MTBH1-06	Hose thermoplastic MTBH1 2x1/4"	6	300	In stock	Enquiry
ZC-MTBH1-08	Hose thermoplastic MTBH1 2x5/16"	8	240	In stock	Enquiry
ZC-MTBH1-10	Hose thermoplastic MTBH1 2x3/8"	10	225	In stock	Enquiry
ZC-MTBH1-13	Hose thermoplastic MTBH1 2x1/2"	12	190	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Light, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, fuels, liquids based on water. on request micro-perforated (for gases and air). Inner layer: polyester. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 325 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).