Can FM240 Steel Braided Thermoplastic Sub-Duct Hose be used for both hydraulic oil and fuel transfer at operating pressures up to 300 bar?

Yes. FM240 Steel Braided Thermoplastic Sub-Duct Hose can be used for both hydraulic oil and fuel transfer at operating pressures up to 300 bar, provided you select the appropriate hose diameter rated to 300 bar. The hose is explicitly engineered for demanding hydraulic oil systems and for transfer of fuels, gases, air and water-based fluids. Its polyester inner layer resists fluid penetration, the steel braid reinforcement delivers high-strength pressure resistance, and the welded outer layer plus micro-perforated polyurethane coating ensure durability and wear resistance. Temperature limits (–40°C to +93°C; up to +65°C for water and air) should also be respected for the specific application. Always confirm the exact diameter/pressure rating, fluid compatibility and relevant safety standards for your use case before installation.

Is FM240 Steel Braided Thermoplastic Sub-Duct Hose suitable for transferring gases and water-based fluids at temperatures down to -40°C and up to +93°C?

Yes. FM240 Steel Braided Thermoplastic Sub-Duct Hose is suitable for transferring gases and water-based fluids within the stated temperature limits. The product description specifies a temperature range from -40°C to +93°C overall and notes suitability for water and air up to +65°C. Combined with its polyester inner layer for fluid resistance, steel braid reinforcement for pressure strength (180–300 bar depending on diameter), and durable polyurethane outer coating, FM240 is engineered to safely and reliably transfer gases and water-based fluids across those temperature conditions.

Hose thermoplastic twin with a steel braid FM240

All products, Thermoplastic hoses/

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	93
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Light, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, gases, air, fuels, liquids based on water. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MC-FM240C-06	Hose thermoplastic FM240C 2x1/4"	6	300	In stock	Enquiry
MC-FM240D-08	Hose thermoplastic FM240D 2x5/16"	8	215	In stock	Enquiry
MC-FM240E-10	Hose thermoplastic FM240E 2x3/8"	10	215	In stock	Enquiry
MC-FM240F-13	Hose thermoplastic FM240F 2x1/2"	12	180	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Light, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, gases, air, fuels, liquids based on water. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).