Is the Straight Hose End with Male BSP, Plastic PP/PVDF, Series 1A EM compatible with sterilization methods used in dialysis and pharmaceutical processes?

Straight Hose End with Male BSP, Plastic PP/PVDF, Series 1A EM is designed for use in medical, dialysis and pharmaceutical environments and is made from high-quality polypropylene (PP) or PVDF, materials known for chemical resistance and durability. Its construction (integrated sleeve, reliable clamping ring) and compatibility with hoses like PTFE and silicone make it suitable for many process connections. Regarding sterilization compatibility: - PVDF versions offer better resistance to aggressive sterilization (steam autoclaving, some chemical sterilants) than PP; both resist common chemical disinfectants used in pharma/dialysis. - Repeated high-temperature steam sterilization (autoclave) is more suitable for PVDF; PP may deform or lose mechanical performance at prolonged high temperatures. - Chemical sterilants (e.g., peracetic acid, hydrogen peroxide) are generally compatible, but compatibility depends on concentration and exposure time; PVDF is the more robust choice. - Gamma and ethylene oxide sterilization are typically compatible with both plastics, but validate for the specific hose and assembly. Conclusion: Straight Hose End with Male BSP, Plastic PP/PVDF, Series 1A EM can be compatible with typical dialysis and pharmaceutical sterilization methods, with PVDF offering superior thermal and chemical resistance. Final suitability must be confirmed by validating the specific material variant (PP vs PVDF), the hose material used, and the exact sterilization method, temperature, and exposure conditions.

Can the Straight Hose End with Male BSP, Plastic PP/PVDF, Series 1A EM be safely autoclaved and retain hose clamping performance after repeated cycles?

Straight Hose End with Male BSP, Plastic PP/PVDF, Series 1A EM: The product description does not explicitly state autoclave compatibility. Materials (PP or PVDF) can resist elevated temperatures and aggressive media better than many plastics, but autoclaving typically involves 121–134°C and repeated steam, which can affect polymer dimensional stability and mechanical properties over time. The fitting’s integrated sleeve and clamping ring are designed for repeated reuse under normal service, and it supports up to 10 bar, but there is no guarantee that repeated autoclave cycles will preserve hose-clamping performance unless the manufacturer specifically certifies autoclave resistance. Recommendation: Verify with the manufacturer or technical datasheet for explicit autoclave approval for the chosen material and size. If unavailable, perform validated in-house testing: cycle samples through the intended autoclave program and inspect for deformation, loss of clamping force, cracking, or chemical changes, and test leak/clamp performance after the required number of cycles before use in critical applications.

A fitting straight for hose with a male BSP thread with plastic PP, PVDF, series 1A type EM

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

A fitting straight for hose with a male BSP thread type EM, found wide use in laboratories, medicine (e.g. devices for dialysis), industry pharmaceutical, chemical and food. has integrated sleeve, co facilitates assembly, a locking hose occurs using ring clamping, is found inside knurled a nut. thanks to its flexibility ring clamping It can be used several times in this same coupling. Intended is for flexible, smooth, unreinforced hoses, PVC, PA, PUR, PTFE, FKM, silicone and hoses TYGON ®. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EM-1A100MG4014PP	Straight fitting (1A series) with 1/4" BSP male, hose 4x6 mm, polypropylene	4	10	In stock	Enquiry
EM-1A100MG4014PV	Straight fitting (1A series) with 1/4" BSP male, hose 4x6 mm, PVDF	4	10	In stock	Enquiry
EM-1A100MG4018PP	Straight fitting (1A series) with 1/8" BSP male, hose 4x6 mm, polypropylene	4	10	In stock	Enquiry
EM-1A100MG4018PV	Straight fitting (1A series) with 1/8" BSP male, hose 4x6 mm, PVDF	4	10	In stock	Enquiry
EM-1A100MG4538PV	Straight fitting (1A series) with 3/8" BSP male, hose 8x10 mm, PVDF	8	10	In stock	Enquiry
EM-1A100MG4738PP	Straight fitting (1A series) with 3/8" BSP male, hose 9x12 mm, polypropylene	8	10	In stock	Enquiry
EM-1A100MG4838PP	Straight fitting (1A series) with 3/8" BSP male, hose 10x12 mm, PP	10	10	In stock	Enquiry
EM-1A100MG4838PV	Straight fitting (1A series) with 3/8" BSP male, hose 10x12 mm, PVDF	10	10	In stock	Enquiry
EM-1A100MG5212PP	Straight fitting (1A series) with 1/2" BSP male, hose 12x16 mm, polypropylene	12	10	In stock	Enquiry
EM-1A100MG5212PV	Straight fitting (1A series) with 1/2" BSP male, hose 12x16 mm, PVDF	12	10	In stock	Enquiry
EM-1A100MG5634PP	Straight fitting (1A series) with 3/4" BSP male, hose 16x20 mm, polypropylene	16	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A fitting straight for hose with a male BSP thread type EM, found wide use in laboratories, medicine (e.g. devices for dialysis), industry pharmaceutical, chemical and food. has integrated sleeve, co facilitates assembly, a locking hose occurs using ring clamping, is found inside knurled a nut. thanks to its flexibility ring clamping It can be used several times in this same coupling. Intended is for flexible, smooth, unreinforced hoses, PVC, PA, PUR, PTFE, FKM, silicone and hoses TYGON ®. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.