Is the Straight Hose Tail with BSP Male Thread, PP/PVDF, Series 2N Type EM compatible with PTFE, FEP, PFA, glass, metal, PA and PE rigid hoses without reducing flow?

Yes. The Straight Hose Tail with BSP Male Thread, PP/PVDF, Series 2N Type EM is explicitly engineered for use with rigid hoses and tubes made of PTFE, FEP, PFA, glass, metal, PA and PE. Its locking ring and nut system plus a PTFE sealing ring ensure a secure, chemically resistant connection without reducing the hose cross‑section, so flow is maintained. Made from PP or PVDF and rated up to 10 bar, it provides reliable, leak‑free performance across the listed materials and sizes.

Can the Straight Hose Tail with BSP Male Thread, PP/PVDF, Series 2N Type EM be sterilized for use in pharmaceutical and medical applications without degrading the PTFE sealing ring?

Straight Hose Tail with BSP Male Thread, PP/PVDF, Series 2N Type EM can be sterilized for pharmaceutical and medical use without degrading the PTFE sealing ring, provided appropriate sterilization methods and parameters are chosen. PTFE is highly chemical- and heat-resistant and tolerates common sterilization processes (autoclaving/steam up to typical sterilization temperatures, many chemical sterilants, and gamma irradiation) far better than elastomers. The fitting body materials (PP or PVDF) are the limiting factors: PVDF has superior thermal and chemical resistance compared with PP, so PVDF fittings withstand harsher sterilization cycles (higher temperatures and stronger chemicals) with less risk of deformation. To ensure no degradation of the PTFE sealing ring: - Prefer PVDF construction when frequent high-temperature steam sterilization or aggressive chemical sterilants are required. - Validate sterilization cycles (temperature, time, chemical concentration, irradiation dose) for the complete assembly (fitting + hose/tube + PTFE seal). - Avoid exceeding the maximum service temperatures and exposure limits of PP if using PP fittings. - Follow manufacturer cleaning/sterilization recommendations and perform periodic inspection for seal integrity. With correct material selection (PVDF for the most demanding regimes) and validated sterilization parameters, the PTFE sealing ring in Straight Hose Tail with BSP Male Thread, PP/PVDF, Series 2N Type EM will maintain performance and not degrade.

A fitting straight for hose with a male BSP thread with plastic PP, PVDF, series 2N type EM

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

A fitting straight for hose with a male BSP thread series 2N type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Intended is for rigid hoses and tubes made with fluoropolymers PTFE, FEP, PFA, tubes glass, metal, polyamide (PA) and tubes made with polyethylene (PE). locking hose/tubes in the tip occurs using ring cutting and a nut. sealing connections ensures ring with PTFE. solution to eliminates reducers cross-section hose, co in effect not affects on Flow rate media. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EM-2N100MG3814PP	Straight fitting (2N series) with 1/4" BSP male, hose 4 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100MG3814PV	Straight fitting (2N series) with 1/4" BSP male, hose 4 mm, PVDF	-	10	In stock	Enquiry
EM-2N100MG3818PP	Straight fitting (2N series) with 1/8" BSP male, hose 4 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100MG3818PV	Straight fitting (2N series) with 1/8" BSP male, hose 4 mm, PVDF	-	10	In stock	Enquiry
EM-2N100MG4014PP	Straight fitting (2N series) with 1/4" BSP male, hose 6 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100MG4014PV	Straight fitting (2N series) with 1/4" BSP male, hose 6 mm, PVDF	-	10	In stock	Enquiry
EM-2N100MG4038PP	Straight fitting (2N series) with 3/8" BSP male, hose 6 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100MG4038PV	Straight fitting (2N series) with 3/8" BSP male, hose 6 mm, PVDF	-	10	In stock	Enquiry
EM-2N100MG4312PP	Straight fitting (2N series) with 1/2" BSP male, hose 8 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100MG4312PV	Straight fitting (2N series) with 1/2" BSP male, hose 8 mm, PVDF	-	10	In stock	Enquiry
EM-2N100MG4338PP	Straight fitting (2N series) with 3/8" BSP male, hose 8 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100MG4338PV	Straight fitting (2N series) with 3/8" BSP male, hose 8 mm, PVDF	-	10	In stock	Enquiry
EM-2N100MG4812PP	Straight fitting (2N series) with 1/2" BSP male, hose 12 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100MG4812PV	Straight fitting (2N series) with 1/2" BSP male, hose 12 mm, PVDF	-	10	In stock	Enquiry
EM-2N100MG5112PP	Straight fitting (2N series) with 1/2" BSP male, hose 14 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100MG5112PV	Straight fitting (2N series) with 1/2" BSP male, hose 14 mm, PVDF	-	10	In stock	Enquiry
EM-2N100MG5212PP	Straight fitting (2N series) with 1/2" BSP male, hose 15 mm, polypropylene	-	10	In stock	Enquiry
EM-2N100MG5212PV	Straight fitting (2N series) with 1/2" BSP male, hose 15 mm, PVDF	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A fitting straight for hose with a male BSP thread series 2N type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Intended is for rigid hoses and tubes made with fluoropolymers PTFE, FEP, PFA, tubes glass, metal, polyamide (PA) and tubes made with polyethylene (PE). locking hose/tubes in the tip occurs using ring cutting and a nut. sealing connections ensures ring with PTFE. solution to eliminates reducers cross-section hose, co in effect not affects on Flow rate media. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.