Hose semi-transparent perfluoroalkoxy, VERSILON PFA
Light transparent smooth hose with natural (non-regenerated) polymer fluorine PFA (perfluoroalkoxy), material o properties close for PTFE. hose is characterized excellent resistance chemical, stability temperature dimensions and shape, very smooth, free of micro-pores surface inner and external, high strength pressure and resistance on rupture caused excessive stresses. good transparency hose allows on easy observation level or flow. resistant to radiation UV. intended for low-pressure installation aggressive substances chemical or when required is high cleanliness and inert chemical material hose. used commonly in laboratories, industry chemical and pharmaceutical. Due to excellent properties insulating (strength dielectric 3 ÷ 4 times greater od PTFE) used in industry electronic and semiconductors. hose not is antistatic (not dissipates charges electric for substances non-conductive). not recommended for pneumatic fittings push-in. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Hose material: PFA. hardness Shore (D) 60. Operating temperature: od -200°C up to +260°C. Working pressure: from 7 bar to 19.5 bar – depending on the diameter and wall thickness wall hose.
List of product variants
Do you need a larger quantity of products or a bespoke quote?
Light transparent smooth hose with natural (non-regenerated) polymer fluorine PFA (perfluoroalkoxy), material o properties close for PTFE. hose is characterized excellent resistance chemical, stability temperature dimensions and shape, very smooth, free of micro-pores surface inner and external, high strength pressure and resistance on rupture caused excessive stresses. good transparency hose allows on easy observation level or flow. resistant to radiation UV. intended for low-pressure installation aggressive substances chemical or when required is high cleanliness and inert chemical material hose. used commonly in laboratories, industry chemical and pharmaceutical. Due to excellent properties insulating (strength dielectric 3 ÷ 4 times greater od PTFE) used in industry electronic and semiconductors. hose not is antistatic (not dissipates charges electric for substances non-conductive). not recommended for pneumatic fittings push-in. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Hose material: PFA. hardness Shore (D) 60. Operating temperature: od -200°C up to +260°C. Working pressure: from 7 bar to 19.5 bar – depending on the diameter and wall thickness wall hose.
Additional information
| Material | PFA/MFA/FEP – fluoropolymer |
|---|---|
| Maximum operating temperature [°C] | 260 |
| Minimum operating temperature [°C] | -200 |
| Vacuum resistance | no |
| Standard length [m] | 10, 50 |















