Twin thermoplastic hose with a steel braid MTB1

Additional information

Material

PA – polyamide

Maximum operating temperature [°C]

100

Minimum operating temperature [°C]

-40

Vacuum resistance

check

Reinforcement

steel braid

MTB1 thermoplastic hose with steel braid is a flexible high-pressure hose in a twin version (two hoses with bonded outer covers). Designed for conveying chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. The steel braid construction enables electrical charges to be conducted, allowing the hose to be used in environments with static electricity hazards, particularly with fast-flowing non-conductive liquids such as chemicals, organic solvents and paints. A microperforated version for gases and air is available on request. The hose must be earthed during operation. Inner layer: polyamide. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 350 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
ZC-MTB1-05Hose thermoplastic MTB1 2x3/16"5350In stock0 €
Enquiry
ZC-MTB1-06Hose thermoplastic MTB1 2x1/4"6300In stock0 €
Enquiry
ZC-MTB1-08Hose thermoplastic MTB1 2x5/16"8240In stock0 €
Enquiry
ZC-MTB1-10Hose thermoplastic MTB1 2x3/8"10225In stock0 €
Enquiry
ZC-MTB1-13Hose thermoplastic MTB1 2x1/2"12190In stock0 €
Enquiry

Do you need a larger quantity of products or a bespoke quote?

MTB1 thermoplastic hose with steel braid is a flexible high-pressure hose in a twin version (two hoses with bonded outer covers). Designed for conveying chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. The steel braid construction enables electrical charges to be conducted, allowing the hose to be used in environments with static electricity hazards, particularly with fast-flowing non-conductive liquids such as chemicals, organic solvents and paints. A microperforated version for gases and air is available on request. The hose must be earthed during operation. Inner layer: polyamide. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 350 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).

Additional information

Material

PA – polyamide

Maximum operating temperature [°C]

100

Minimum operating temperature [°C]

-40

Vacuum resistance

check

Reinforcement

steel braid

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?