Twin thermoplastic hose with a steel braid MTB2
Flexible thermoplastic MTB2 hose with double steel braid, designed for conveying chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. Twin version (two hoses with bonded outer covers). The steel braid construction enables electrical charges to be conducted, allowing the hose to be used in environments with static electricity hazards, particularly with fast-flowing non-conductive liquids such as chemicals, organic solvents and paints. A microperforated version for gases and air is available on request. The hose must be earthed during operation. Inner layer: polyamide. Reinforcement: double steel braid. Outer layer: polyurethane. Working pressure: from 275 bar to 400 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).
List of product variants
Do you need a larger quantity of products or a bespoke quote?
Flexible thermoplastic MTB2 hose with double steel braid, designed for conveying chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. Twin version (two hoses with bonded outer covers). The steel braid construction enables electrical charges to be conducted, allowing the hose to be used in environments with static electricity hazards, particularly with fast-flowing non-conductive liquids such as chemicals, organic solvents and paints. A microperforated version for gases and air is available on request. The hose must be earthed during operation. Inner layer: polyamide. Reinforcement: double steel braid. Outer layer: polyurethane. Working pressure: from 275 bar to 400 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).
Additional information
| Material | PA – polyamide |
|---|---|
| Maximum operating temperature [°C] | 100 |
| Minimum operating temperature [°C] | -40 |
| Vacuum resistance | check |
| Reinforcement | 2 steel braids |















