Twin thermoplastic hose with a steel braid SM240
Flexible high-pressure thermoplastic hose with a steel braid, in a twin version (two hoses with their outer layers welded together). Intended for chemicals, solvents, paints, isocyanate, polyol, as well as gases, air, fuels and water-based fluids. Thanks to the steel braid, the hose conducts electrical charges and can be used where static electricity poses a hazard due to the rapid flow of electrically non-conductive fluids: chemicals, organic solvents and paints. The hose should be earthed. Inner layer: PA12 polyamide. Reinforcement: steel braid. Outer layer: microperforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
List of product variants
Do you need a larger quantity of products or a bespoke quote?
Flexible high-pressure thermoplastic hose with a steel braid, in a twin version (two hoses with their outer layers welded together). Intended for chemicals, solvents, paints, isocyanate, polyol, as well as gases, air, fuels and water-based fluids. Thanks to the steel braid, the hose conducts electrical charges and can be used where static electricity poses a hazard due to the rapid flow of electrically non-conductive fluids: chemicals, organic solvents and paints. The hose should be earthed. Inner layer: PA12 polyamide. Reinforcement: steel braid. Outer layer: microperforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
Additional information
| Material | PA – polyamide |
|---|---|
| Maximum operating temperature [°C] | 93 |
| Minimum operating temperature [°C] | -40 |
| Vacuum resistance | check |
| Reinforcement | steel braid |















