What maintenance schedule is recommended for the GA Series GAL Pneumatic Air Lubricator with BSP Female Thread to ensure optimal performance?

Recommended maintenance schedule for the GA Series GAL Pneumatic Air Lubricator with BSP Female Thread: - Daily/Weekly: Check visible oil level and refill when below 25% capacity; verify there are no external leaks around BSP threads and connections. - Monthly: Inspect and clean the sight dome and vent to ensure proper oil mist visibility and flow; verify mounting bracket and GA connection sets (L, T, U) are secure and free of damage. - Every 3 months: Drain and replace lubricator oil completely; check for contamination or degradation of oil and replace with manufacturer-recommended pneumatic lubricating oil. - Every 6 months: Inspect internal components (float, metering valve, seals) for wear or deposits; clean or replace worn parts as necessary. - Annually or every 12 months: Perform full functional test at operating conditions (up to 10 bar, within -5°C to +70°C) to confirm correct oil feed rate and no pressure loss; verify flow capacity appropriate for system size (2750/5000/8800/14500 l/min at 6 bar, Δp=1 bar) and replace unit or major components if performance is degraded. - Additional: Increase inspection frequency in harsh environments (high contamination, extreme temperatures) or for high-flow systems. Always isolate supply pressure and follow safety procedures before maintenance.

GA Series GAL Pneumatic Air Lubricator with BSP Female Thread

Q: How do I select the correct size of GA Series GAL Pneumatic Air Lubricator with BSP Female Thread for my system’s flow rate and pressure?

To select the correct size of GA Series GAL Pneumatic Air Lubricator with BSP Female Thread for your system’s flow rate and pressure, follow these steps: 1. Determine your system’s maximum working pressure and required flow rate (l/min). Use the highest expected values in operation. 2. Check pressure compatibility: the lubricator supports up to 10 bar and operates −5°C to +70°C. Ensure your system pressure ≤ 10 bar and temperature within range. 3. Match flow capacity at operating pressure: flow data are given at 6 bar input with Δp = 1 bar: - Size 200 → 2750 l/min - Size 300 → 5000 l/min - Size 400 → 8800 l/min - Size 600 → 14500 l/min Choose a size whose flow capacity ≥ your required flow at similar operating pressure. If your operating pressure differs from 6 bar, select the next larger size to ensure margin. 4. Account for safety margin and pressure drops: allow 10–25% extra capacity for unexpected peaks, future expansion, and piping losses. 5. Verify BSP connection compatibility (1/8" to 1") and mounting options; use GA connection sets (L, T, U) if assembling multiple units. Example: if your system requires 4200 l/min at ~6 bar, select Size 300 (5000 l/min) or Size 400 if you prefer larger margin.

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	70
Minimum operating temperature [°C]	-5

The GAL series GA lubricator with internal BSP thread is designed to provide reliable oil mist lubrication for pneumatic systems, ensuring long-lasting performance and protection of connected devices. Each unit is supplied with a practical mounting bracket for easy installation, while dedicated GA connection sets in L, T, and U configurations allow flexible assembly of multiple components. Available in four sizes—200, 300, 400, and 600—the lubricators operate with supply pressures up to 10 bar and within a temperature range of -5°C to +70°C, making them suitable for diverse industrial environments. The BSP connections range from 1/8″ to 1″, offering compatibility with a wide variety of setups. High flow capacities guarantee efficient operation: 2750 l/min for size 200, 5000 l/min for size 300, 8800 l/min for size 400, and an impressive 14500 l/min for size 600, all measured at 6 bar input pressure with Δp = 1 bar. This combination of robust design, versatile connection options, and outstanding performance makes the GA lubricator an essential component for optimizing pneumatic installations and ensuring smooth, uninterrupted workflows.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AT-GAL200-06	GAL200 Grease Gun 1/8"	-	-	In stock	Enquiry
AT-GAL200-08	GAL200 Grease Gun 1/4"	-	-	In stock	Enquiry
AT-GAL300-08	GAL300 Grease Gun 1/4"	-	-	In stock	Enquiry
AT-GAL300-10	GAL300 3/8 grease gun	-	-	In stock	Enquiry
AT-GAL300-15	GAL300 Grease Gun 1/2"	-	-	In stock	Enquiry
AT-GAL400-10	GAL400 3/8 grease gun	-	-	In stock	Enquiry
AT-GAL400-15	GAL400 Grease Gun 1/2"	-	-	In stock	Enquiry
AT-GAL600-20	GAL600 Grease Gun 3/4"	-	-	In stock	Enquiry
AT-GAL600-25	GAL600 Grease Gun 1	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The GAL series GA lubricator with internal BSP thread is designed to provide reliable oil mist lubrication for pneumatic systems, ensuring long-lasting performance and protection of connected devices. Each unit is supplied with a practical mounting bracket for easy installation, while dedicated GA connection sets in L, T, and U configurations allow flexible assembly of multiple components. Available in four sizes—200, 300, 400, and 600—the lubricators operate with supply pressures up to 10 bar and within a temperature range of -5°C to +70°C, making them suitable for diverse industrial environments. The BSP connections range from 1/8″ to 1″, offering compatibility with a wide variety of setups. High flow capacities guarantee efficient operation: 2750 l/min for size 200, 5000 l/min for size 300, 8800 l/min for size 400, and an impressive 14500 l/min for size 600, all measured at 6 bar input pressure with Δp = 1 bar. This combination of robust design, versatile connection options, and outstanding performance makes the GA lubricator an essential component for optimizing pneumatic installations and ensuring smooth, uninterrupted workflows.