Is the UHP Hose for SPIR STAR® 2800 bar Water Jet Cleaning & Cutting, Type 6 compatible with my hydraulic system fittings and operating temperatures?

Yes — the UHP Hose for SPIR STAR® 2800 bar Water Jet Cleaning & Cutting, Type 6 is designed to be compatible with typical hydraulic system fittings and operating temperatures used in high‑pressure industrial applications. Key compatibility points: - Fittings: The hose uses stainless‑steel end fittings and galvanized carbon‑steel sleeves, providing secure, durable connections compatible with standard hydraulic and high‑pressure water‑jet fittings. Ensure your system’s coupling type, thread size and sealing method match the hose end specification before installation. - Pressure: Rated working pressure up to 2800 bar, suitable for extreme high‑pressure hydraulic and water‑jet operations. - Temperature: Operating range −30°C to +70°C (note: +60°C for variant SS‑NW‑05‑6H), covering common hydraulic fluid and environmental temperatures. Verify your system’s peak fluid temperatures do not exceed these limits. - Media compatibility: POM inner layer and PA outer layer suit water, hydraulic fluids, and many chemicals used in injection and lubrication; confirm chemical compatibility for specific fluids. For final confirmation, match the hose end dimensions/threads and verify maximum system pressure and peak fluid/ambient temperatures against the hose ratings. If you provide your fitting type and operating temperature range, I can confirm fitment precisely.

Can the UHP Hose for SPIR STAR® 2800 bar Water Jet Cleaning & Cutting, Type 6 be used for chemical injection applications, and are there any chemical compatibility limitations?

Yes — the UHP Hose for SPIR STAR® 2800 bar Water Jet Cleaning & Cutting, Type 6 is specified for chemical injection among its intended applications, so it can be used for many chemical injection tasks. However, there are important chemical compatibility considerations: - Inner tube material: POM (polyoxymethylene) is resistant to many hydrocarbons, oils, and some solvents, but it can be attacked by strong acids, strong bases, certain chlorinated solvents, and a few polar solvents. Compatibility must be confirmed for the specific chemical, concentration and temperature. - Temperature limits: The hose is rated -30°C to +70°C (note +60°C for SS-NW-05-6H). Elevated temperatures can accelerate chemical degradation; ensure operating temperature stays within range for the chemical in use. - Pressure and fittings: Rated to 2800 bar; ensure chemical injection pressures do not exceed this and that stainless-steel end fittings and galvanized sleeves are compatible with the chemical (chlorides and certain corrosives can attack some steels). - Safety and certification: Each hose is pressure-tested and certified, but you should verify any industry- or application-specific material compatibility and regulatory requirements (e.g., for toxic, reactive or abrasive chemicals). - Recommendation: Provide the exact chemical(s), concentration, temperature and pressure to the supplier/manufacturer for a compatibility assessment and, if necessary, select alternative materials or special coatings. In summary, the hose can be used for chemical injection in many cases, but confirm chemical-specific compatibility, operating temperature and pressure, and fitting material suitability before use.

UHP Hose for SPIR STAR® 2800 bar Water Jet Cleaning & Cutting, Type 6

Additional information

Material	SS – stainless steel
Maximum operating temperature [°C]	70
Minimum operating temperature [°C]	-30

Engineered for maximum performance, this multi-braided high-pressure hose combines strength, flexibility, and reliability to meet the most demanding industrial applications. Designed for operations such as high-pressure water cleaning, precision cutting, hydroforming, hydraulic systems, chemical injection, and lubrication under extreme conditions, it ensures consistent efficiency and safety. The hose features a durable POM (polyoxymethylene) inner layer for optimal flow, protected by a robust PA (polyamide) outer layer for enhanced resistance to wear and environmental factors. Its stainless-steel end fittings and galvanized carbon-steel sleeves guarantee secure connections and long-lasting durability even under intensive use. With a working pressure of up to 2800 bar and an operating temperature range from -30°C to +70°C (+60°C for SS-NW-05-6H), it delivers outstanding performance across a wide spectrum of industries. Each hose is rigorously pressure-tested and supplied with full certification, offering customers confidence in both quality and compliance. This makes it the ideal solution for professionals who demand reliability, safety, and efficiency in high-pressure environments.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HASS-05-014-L5M	Spir Star Hose DN5 SS-NW-05/6H Lc=5m 2xGZ HP GZ 9/16"-18 UNF LH WP 2800 bar	5	2800	In stock	Enquiry
HASS-05-015-L5M	Spir Star Hose DN5 SS-NW-05/6H Lc=5m 2xGZ HP GZ M14x1.5 LH WP 2800 bar	5	2800	In stock	Enquiry
HASS-08-012-L20M	Spiral Hose Spir Star DN8 SS-NW-08/6UHP Lc=20m 2xGZ HP GZ 9/16"-18 UNF LH WP 2800 bar	8	2800	In stock	Enquiry
HASS-08-013-L20M	Spir Star Hose DN8 SS-NW-08/6UHP Lc=20m 2xGZ HP GZ M14x1.5 LH WP 2800 bar	8	2800	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Engineered for maximum performance, this multi-braided high-pressure hose combines strength, flexibility, and reliability to meet the most demanding industrial applications. Designed for operations such as high-pressure water cleaning, precision cutting, hydroforming, hydraulic systems, chemical injection, and lubrication under extreme conditions, it ensures consistent efficiency and safety. The hose features a durable POM (polyoxymethylene) inner layer for optimal flow, protected by a robust PA (polyamide) outer layer for enhanced resistance to wear and environmental factors. Its stainless-steel end fittings and galvanized carbon-steel sleeves guarantee secure connections and long-lasting durability even under intensive use. With a working pressure of up to 2800 bar and an operating temperature range from -30°C to +70°C (+60°C for SS-NW-05-6H), it delivers outstanding performance across a wide spectrum of industries. Each hose is rigorously pressure-tested and supplied with full certification, offering customers confidence in both quality and compliance. This makes it the ideal solution for professionals who demand reliability, safety, and efficiency in high-pressure environments.