Can the Air Blow Gun with Standard Nozzle, Top DN 7.2 Connector, Aluminum be used safely with liquids other than water (e.g., solvents or oils) within its specified temperature and pressure ranges?

Air Blow Gun with Standard Nozzle, Top DN 7.2 Connector, Aluminum is specified as suitable for use with air and water within its temperature range (-10°C to +50°C) and pressure limits (operating 2–8 bar, max 10 bar). The description highlights forged anodized aluminum body and nickel-plated brass connection, which offer corrosion resistance and durability, but it does not state compatibility with solvents, oils, or other chemicals. Therefore, you should not assume safe use with solvents or oils based solely on this description. Many solvents and oils can attack seals, coatings or brass fittings, change viscosity and spray behavior, or create fire/health hazards. Before using other liquids, confirm chemical compatibility of all wetted parts (anodized aluminum, any elastomer seals, nickel-plated brass) and verify that the manufacturer expressly permits the specific liquid, pressure and temperature conditions. Also consider flammability, vapor hazards, required ventilation, and any necessary ATEX or safety ratings. If manufacturer guidance is unavailable, do not use solvents or oils.

Can the Air Blow Gun with Standard Nozzle, Top DN 7.2 Connector, Aluminum be used with flammable or corrosive liquids (solvents, oils) and what precautions are required?

Air Blow Gun with Standard Nozzle, Top DN 7.2 Connector, Aluminum Format is designed primarily for compressed air and water. It is made of forged aluminum with an anodized coating and has a nickel‑plated brass connection, offering good corrosion resistance, but it is not specified or certified for use with flammable or aggressive corrosive liquids such as solvents or strong acids/bases. Using it with flammable or corrosive liquids poses risks: chemical attack on seals or coatings, degradation of internal parts, leakage, fire/explosion hazards with flammable solvents, and loss of manufacturer warranty or safety certification. If you consider using it with solvents or oils, take these precautions: - Consult the manufacturer/supplier to confirm chemical compatibility of all wet‑path materials (seals, coatings, internal parts). - Use only fluids that are explicitly approved; otherwise do not use. - Replace standard seals with solvent‑resistant materials (e.g., PTFE, Viton) only if manufacturer permits. - Ensure electrical and ignition sources are controlled; use in well‑ventilated area and follow flammable‑liquid handling regulations (grounding, bonding, explosion‑proof equipment). - Limit pressure/temperature within rated ranges (2–8 bar operating, max 10 bar, −10°C to +50°C). - Perform frequent inspections for corrosion, swelling, leaks; retire tool at first sign of damage. - Prefer dedicated tools rated for solvents/corrosive fluids for safety and compliance. Short answer: Not recommended unless manufacturer confirms compatibility and you implement the strict precautions above.

Air Blow Gun with Standard Nozzle, Top DN 7.2 Connector, Aluminum

Air guns, All products/

Additional information

This professional-grade compressed air gun is crafted from forged aluminum and reinforced with an anodized coating, delivering exceptional durability, strength, and resistance to corrosion. Designed for efficient removal of liquids, fine chips, shavings, and other contaminants, it ensures precise control of airflow through lever pressure adjustment. The tool is equipped with a standard 1.5 mm nozzle featuring an external M12x1.25 connection thread, with the option to replace it with alternative nozzles from the EWO accessory range for tailored applications. Its nickel-plated brass connection enhances reliability, while the EUROSTANDARD 7.2 plug positioned at the top of the body makes it perfectly suited for seamless integration into production lines. Operating within a pressure range of 2 to 8 bar and capable of withstanding up to 10 bar, the gun performs reliably in temperatures from -10°C to +50°C. Versatile enough for use with both air and water, this robust tool combines precision, efficiency, and long-lasting performance, making it an indispensable solution for demanding industrial environments.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-269741	Air gun, standard nozzle, hole diameter 1.5 mm, top connector DN 7.2	-	10	In stock	0 €		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

This professional-grade compressed air gun is crafted from forged aluminum and reinforced with an anodized coating, delivering exceptional durability, strength, and resistance to corrosion. Designed for efficient removal of liquids, fine chips, shavings, and other contaminants, it ensures precise control of airflow through lever pressure adjustment. The tool is equipped with a standard 1.5 mm nozzle featuring an external M12x1.25 connection thread, with the option to replace it with alternative nozzles from the EWO accessory range for tailored applications. Its nickel-plated brass connection enhances reliability, while the EUROSTANDARD 7.2 plug positioned at the top of the body makes it perfectly suited for seamless integration into production lines. Operating within a pressure range of 2 to 8 bar and capable of withstanding up to 10 bar, the gun performs reliably in temperatures from -10°C to +50°C. Versatile enough for use with both air and water, this robust tool combines precision, efficiency, and long-lasting performance, making it an indispensable solution for demanding industrial environments.