Hose brake PTFE with a steel braid OBHR
A PTFE hose with a steel braid and an external colourless polyurethane coating, intended for brake and hydraulic systems and suspensions. resistant to high temperature and aggressive substances chemical, liquid brake DOT3 and DOT4 (the outer surface is also resistant to the mentioned substances). The hose can be used in brake systems equipped with ABS – it reduces the pulsation effect. Made in accordance with the SAE J1401 standard. Inner layer: PTFE. Reinforcement: a single steel braid. Outer layer: polyurethane o high strength on abrasion. Working pressure: 210 bar. Operating temperature: od -40°C up to +130°C.
Do you need a larger quantity of products or a bespoke quote?
A PTFE hose with a steel braid and an external colourless polyurethane coating, intended for brake and hydraulic systems and suspensions. resistant to high temperature and aggressive substances chemical, liquid brake DOT3 and DOT4 (the outer surface is also resistant to the mentioned substances). The hose can be used in brake systems equipped with ABS – it reduces the pulsation effect. Made in accordance with the SAE J1401 standard. Inner layer: PTFE. Reinforcement: a single steel braid. Outer layer: polyurethane o high strength on abrasion. Working pressure: 210 bar. Operating temperature: od -40°C up to +130°C.
Additional information
| Material | PTFE – teflon and similar |
|---|---|
| Maximum operating temperature [°C] | 130 |
| Minimum operating temperature [°C] | -40 |
| Standard length [m] | 10 |















