Hose for conveying chemistry in industry food SUPERTOP LL FOOD UPE®
Strong hose suction-delivery intended for conveying liquid chemicals, in this aggressive acids, bases, alcohols and other detergents used for cleaning installation in plants food (selection in accordance with rules acc. to chapter „hoses chemical” this catalogue). Layer inner with UPE compliant with requirements FDA for contact with food. Widely used in industry food, cosmetic, chemical and petrochemical. has copper cable ensuring continuity electrical between fitting hose. Layer outer resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type M, resistance between fitting line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements : 1) hoses chemical EN 12115:2011. industry food, contact with food (Layer inner) 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. assembly : smooth ends with a spigot (“tail” into the hose) must be used, without sharp or high barbs that could cut or damage the UPE inner layer after clamping. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: white polyethylene UPE. Reinforcement: cord synthetic, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 16 bar. Vacuum: 0.8 ÷ 0.9 bar – depending on the diameter hose. Operating temperature: -30°C up to +100°C.
List of product variants
Do you need a larger quantity of products or a bespoke quote?
Strong hose suction-delivery intended for conveying liquid chemicals, in this aggressive acids, bases, alcohols and other detergents used for cleaning installation in plants food (selection in accordance with rules acc. to chapter „hoses chemical” this catalogue). Layer inner with UPE compliant with requirements FDA for contact with food. Widely used in industry food, cosmetic, chemical and petrochemical. has copper cable ensuring continuity electrical between fitting hose. Layer outer resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type M, resistance between fitting line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements : 1) hoses chemical EN 12115:2011. industry food, contact with food (Layer inner) 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. assembly : smooth ends with a spigot (“tail” into the hose) must be used, without sharp or high barbs that could cut or damage the UPE inner layer after clamping. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: white polyethylene UPE. Reinforcement: cord synthetic, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 16 bar. Vacuum: 0.8 ÷ 0.9 bar – depending on the diameter hose. Operating temperature: -30°C up to +100°C.
Additional information
| Material | UPE – polyethylene UPE |
|---|---|
| Maximum operating temperature [°C] | 100 |
| Minimum operating temperature [°C] | -30 |
| Vacuum resistance | yes |
| Standard length [m] | 30, 60 |
| Reinforcement | steel spiral, synthetic cover |















