Can the SAE 6000 Supercat 90° Flange End, Type ZSK213, Carbon Steel be crimped with all standard hydraulic sleeves and hoses?

SAE 6000 Supercat 90° Flange End, Type ZSK213, Carbon Steel can be crimped, but only with the correct crimping sleeve matched to the hose type. The fitting is specifically engineered for crimping with hoses and provides a secure, durable connection when the appropriate sleeve and tooling for the hose construction are used. It is not guaranteed to be compatible with every standard hydraulic sleeve and hose; compatibility depends on hose inner diameter, reinforcement, and manufacturer specifications. Always verify sleeve dimensions and crimping parameters against the hose maker’s recommendations and perform a test crimp to ensure a proper seal and pressure rating before full service.

Is the SAE 6000 Supercat 90° Flange End, Type ZSK213, Carbon Steel compatible with high-temperature hydraulic fluids and seals?

SAE 6000 Supercat 90° Flange End, Type ZSK213, Carbon Steel Format — Based on the provided description, this fitting is manufactured from carbon steel with a protective galvanization and designed for high‑pressure, durable service. Carbon steel can tolerate elevated temperatures better than many base metals, and galvanization provides corrosion protection, but standard zinc galvanic coatings begin to degrade at sustained temperatures above ~200°C (392°F). Compatibility with high‑temperature hydraulic fluids and seals therefore depends on the specific fluid formulation and seal materials used in the system: - If hydraulic fluid and seals are rated for the targeted high operating temperature and the hose/crimp sleeve assembly is specified for those temperatures, the carbon steel body itself is likely acceptable for typical high‑temperature hydraulic ranges (commonly up to ~150–200°C depending on components). - If operating temperatures approach or exceed the degradation limit of the galvanization or the temperature ratings of the hose, crimp sleeve, or seal materials (e.g., many elastomers degrade above ~120–150°C), the assembly may fail prematurely. Conclusion: The fitting material can withstand elevated temperatures, but safe compatibility with high‑temperature hydraulic fluids and seals requires verification of the entire assembly (hose, crimp sleeve, seals, and coating) and their rated temperature limits. For high‑temperature service, confirm component temperature ratings with the manufacturer or select fittings/coatings and seals explicitly specified for the intended temperature range.

SAE 6000 Supercat 90° Flange End, Type ZSK213, Carbon Steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

The SAE 6000 SUPERCAT (SFS) flange end with a 90° angled design is a robust and reliable solution engineered for demanding hydraulic and industrial applications. Specifically developed for crimping with hoses, it ensures a secure and durable connection when used with the appropriate crimping sleeve tailored to the hose type. Manufactured from high‑quality carbon steel and finished with a protective galvanization layer, the fitting offers excellent resistance to wear, corrosion, and mechanical stress, extending service life even in harsh working environments. Its precise construction guarantees optimal performance under high pressure, while the angled configuration provides flexibility in installation where space is limited or complex routing is required. This makes it an ideal choice for industries seeking efficiency, safety, and long‑lasting reliability in their hydraulic systems.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZSK213-12-12	End fitting 90° SAE 3/4", hose 3/4" SUPERCAT	20	-	In stock	Enquiry
TI-ZSK213-16-12	End fitting 90° SAE 1", hose 3/4" SUPERCAT	20	-	In stock	Enquiry
TI-ZSK213-16-16	End fitting 90° SAE 1", hose 1" SUPERCAT	25	-	In stock	Enquiry
TI-ZSK213-20-16	End fitting 90° SAE 1.1/4", hose 1" SUPERCAT	25	-	In stock	Enquiry
TI-ZSK213-20-20	End fitting 90° SAE 1.1/4", hose 1.1/4" SUPERCAT	32	-	In stock	Enquiry
TI-ZSK213-24-20	End fitting 90° SAE 1.1/2", hose 1.1/4" SUPERCAT	32	-	In stock	Enquiry
TI-ZSK213-24-24	End fitting 90° SAE 1.1/2", hose 1.1/2" SUPERCAT	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The SAE 6000 SUPERCAT (SFS) flange end with a 90° angled design is a robust and reliable solution engineered for demanding hydraulic and industrial applications. Specifically developed for crimping with hoses, it ensures a secure and durable connection when used with the appropriate crimping sleeve tailored to the hose type. Manufactured from high‑quality carbon steel and finished with a protective galvanization layer, the fitting offers excellent resistance to wear, corrosion, and mechanical stress, extending service life even in harsh working environments. Its precise construction guarantees optimal performance under high pressure, while the angled configuration provides flexibility in installation where space is limited or complex routing is required. This makes it an ideal choice for industries seeking efficiency, safety, and long‑lasting reliability in their hydraulic systems.