Polyolefin hose for a wide range of applications VERSILON™ 2001

Additional information

Material

TPE – thermoplastic elastomer

Maximum operating temperature [°C]

57

Minimum operating temperature [°C]

-73

Vacuum resistance

yes

Standard length [m]

15

Flexible, chemically resistant hose. Offers almost twice the service life of typical PVC hoses in peristaltic pump applications. It also provides good chemical resistance to a range of aggressive chemicals, such as polar solvents and corrosive media (acids, alkalis, salts, alcohols). It is durable and does not wear out over time, requiring less frequent replacement and helping avoid production downtime. Suitable for a wide range of uses, including demanding applications. Used for filling and portioning products, dispensing soap and detergents, water treatment lines, and transferring ink and chemicals. Ideal for analytical equipment, condensers, incubators, desiccators, and as a gas and drainage hose. High transparency provides clear visibility of flow. Free from plasticisers and oils – does not alter the properties of the conveyed media. Suitable for analytical testing. Proper incineration of used hoses does not release hazardous substances (e.g. hydrogen chloride). Meets US hygiene and food contact requirements FDA 21 CFR 177.2600. Can be sterilised with ethylene oxide or radiation (up to 2.5 Mrad). Compliant with REACH (2006/1907/EC) – contains no hazardous or prohibited substances. Pressure safety factor 5:1. Installed on hose tails and fittings using hose clips and clamps. We recommend consulting Tubes International specialists when selecting a hose for chemical applications. Maximum working pressure is specified at 23°C. Material: polyolefin. Working temperature: from -73°C to +57°C. Brittleness temperature: -78°C. Hardness: 69 Shore (A). Density: 0.88 g/cm³. Note: Product prepared in the Tubes International CLEAN ROOM under strict cleanliness standards. This product is non-returnable.

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
VE-AE300003Hose VERSILON 2001 1.6x4.8 mm23.1In stock0 €
Enquiry
VE-AE300007Hose VERSILON 2001 3.2x6.4 mm32.07In stock0 €
Enquiry
VE-AE300012Hose VERSILON 2001 4.8x8 mm51.52In stock0 €
Enquiry
VE-AE300017Hose VERSILON 2001 6.4x9.6 mm61.17In stock0 €
Enquiry
VE-AE300022Hose VERSILON 2001 7.9x11.2 mm80.97In stock0 €
Enquiry
VE-AE300027Hose VERSILON 2001 9.6x12.7 mm100.83In stock0 €
Enquiry
VE-AE300038Hose VERSILON 2001 12.7x19.1 mm121.1In stock0 €
Enquiry
VE-AE300046Hose VERSILON 2001 15.9x22.3 mm160.9In stock0 €
Enquiry
VE-AE300053Hose VERSILON 2001 19x25.4 mm200.76In stock0 €
Enquiry
VE-AE300064Hose VERSILON 2001 25.4x35 mm250.9In stock0 €
Enquiry

Do you need a larger quantity of products or a bespoke quote?

Flexible, chemically resistant hose. Offers almost twice the service life of typical PVC hoses in peristaltic pump applications. It also provides good chemical resistance to a range of aggressive chemicals, such as polar solvents and corrosive media (acids, alkalis, salts, alcohols). It is durable and does not wear out over time, requiring less frequent replacement and helping avoid production downtime. Suitable for a wide range of uses, including demanding applications. Used for filling and portioning products, dispensing soap and detergents, water treatment lines, and transferring ink and chemicals. Ideal for analytical equipment, condensers, incubators, desiccators, and as a gas and drainage hose. High transparency provides clear visibility of flow. Free from plasticisers and oils – does not alter the properties of the conveyed media. Suitable for analytical testing. Proper incineration of used hoses does not release hazardous substances (e.g. hydrogen chloride). Meets US hygiene and food contact requirements FDA 21 CFR 177.2600. Can be sterilised with ethylene oxide or radiation (up to 2.5 Mrad). Compliant with REACH (2006/1907/EC) – contains no hazardous or prohibited substances. Pressure safety factor 5:1. Installed on hose tails and fittings using hose clips and clamps. We recommend consulting Tubes International specialists when selecting a hose for chemical applications. Maximum working pressure is specified at 23°C. Material: polyolefin. Working temperature: from -73°C to +57°C. Brittleness temperature: -78°C. Hardness: 69 Shore (A). Density: 0.88 g/cm³. Note: Product prepared in the Tubes International CLEAN ROOM under strict cleanliness standards. This product is non-returnable.

Additional information

Material

TPE – thermoplastic elastomer

Maximum operating temperature [°C]

57

Minimum operating temperature [°C]

-73

Vacuum resistance

yes

Standard length [m]

15

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?