Electrically conductive pneumatic hose for potentially explosive atmospheres PA12 TACO
Lightweight, flexible pneumatic hose made of electrically conductive polyamide PA 12 (surface resistance R 6 Ω/cm). A hose with antielectrostatic properties – it allows dissipation and discharge of electric charges generated during the flow of a substance through the hose or when the hose is rubbed from outside (the hose should be earthed to discharge the charges). It can be used for industrial pneumatic installations, vehicle braking systems, as well as for the flow of paints, varnishes, solvents, chemicals, petrochemical substances – also in explosion-hazard zones (in accordance with the ATEX directive, category 2GD, zones 1.21, 2.22). Use in an explosion-hazard zone (ATEX) should be preceded by a risk analysis carried out by a specialist. The calibrated outer diameter allows connection to the installation by means of push-in fittings (the use of metal fittings and earthing is recommended in order to discharge charges from the installation). Fittings with a crimp ring and push-on fittings can also be used. Standards and requirements: DIN 74324 and DIN 73378 for polyamide hoses used in road vehicles and in the braking systems of these vehicles, ATEX requirements (2014/34/EU) for explosion-hazard zones. Hose material: polyamide PA12 (nylon 12). Hardness: 65 Shore (D). Working pressure: from 15 bar to 51 bar (depending on hose diameter and wall thickness). Operating temperature: from -20°C to +60°C (working pressure depends on temperature).
List of product variants
Do you need a larger quantity of products or a bespoke quote?
Lightweight, flexible pneumatic hose made of electrically conductive polyamide PA 12 (surface resistance R 6 Ω/cm). A hose with antielectrostatic properties – it allows dissipation and discharge of electric charges generated during the flow of a substance through the hose or when the hose is rubbed from outside (the hose should be earthed to discharge the charges). It can be used for industrial pneumatic installations, vehicle braking systems, as well as for the flow of paints, varnishes, solvents, chemicals, petrochemical substances – also in explosion-hazard zones (in accordance with the ATEX directive, category 2GD, zones 1.21, 2.22). Use in an explosion-hazard zone (ATEX) should be preceded by a risk analysis carried out by a specialist. The calibrated outer diameter allows connection to the installation by means of push-in fittings (the use of metal fittings and earthing is recommended in order to discharge charges from the installation). Fittings with a crimp ring and push-on fittings can also be used. Standards and requirements: DIN 74324 and DIN 73378 for polyamide hoses used in road vehicles and in the braking systems of these vehicles, ATEX requirements (2014/34/EU) for explosion-hazard zones. Hose material: polyamide PA12 (nylon 12). Hardness: 65 Shore (D). Working pressure: from 15 bar to 51 bar (depending on hose diameter and wall thickness). Operating temperature: from -20°C to +60°C (working pressure depends on temperature).
Additional information
| Material | PA – polyamide |
|---|---|
| Maximum operating temperature [°C] | 60 |
| Minimum operating temperature [°C] | -20 |
| Standard length [m] | 100, 50 |















