- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose tail with inner diameter of 9 mm, 13 mm or 19 mm, with BSP DIN 3863 female thread (60° cone). Used in industry for cooling injection moulds and die-cast parts made of plastics, aluminium, brass and zinc alloys. Working pressure: 25 bar. Material: brass. Operating temperature: from -20°C to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting for a hose with an internal diameter of 9 mm, 13 mm or 19 mm, with metric female thread DIN 3863 (60° cone). Used in industry for cooling injection molds and die-cast parts made of plastics, aluminum, brass and zinc alloys. Working pressure: 25 bar. Material: brass. Operating temperature: from -20°C to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting for a hose with an inner diameter of 9 mm, 13 mm or 19 mm, with BSP male thread. Used in industry for cooling injection and casting molds for plastic, aluminium, brass and zinc alloy parts. Working pressure: 25 bar. Material: brass. Operating temperature: from -20°C to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose tail with an internal diameter of 9 mm, 13 mm or 19 mm, with metric male thread. Used in industry for cooling injection and casting moulds for plastic, aluminium, brass and zinc alloy parts. Working pressure: 25 bar. Material: brass. Operating temperature: from -20°C to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / Details45° flange fitting NON SKIVE SUPERCAT (SFC 45), designed for crimping onto 4SP, 4SH, R13 and R15 hoses using a TI-N... ferrule. Assembly: without skiving the hose rubber. Material: zinc-plated carbon steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-piece swivel fitting for hose, with BSP male thread. Designed for installation in industrial hoses, particularly washdown hoses at the connection to the water gun, where the gun needs to rotate during operation. Material: brass or AISI 316 steel. Seal: EPDM (brass), Viton (AISI 316). Working pressure: up to 24 bar.
Select options This product has multiple variants. The options may be chosen on the product page / Details6 mm tubular fitting, with ferrule, for FR5T CAPILLARY type thermoplastic hose for air conditioning. Allows connecting rubber hose assemblies with air conditioning system components. Material: for DN2 copper (nipple, tube), aluminum (ferrule); for DN4 copper (nipple, tube), carbon steel (ferrule).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting with gland with UNF SAE female thread – 45° cone seal, for FR5T CAPILLARY thermoplastic air-conditioning hose. Allows connection of rubber hose assemblies to air-conditioning system components. Material: for DN2 brass (nipple, nut), aluminium (ferrule); for DN4 carbon steel (nipple, nut, ferrule).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting with UNF SAE female thread - 45° cone seal, for FR5T CAPILLARY type thermoplastic hose for air conditioning. Allows connection of rubber hose assemblies with air conditioning system components. Material: for DN2 brass (nipple, nut), aluminum (ferrule); for DN4 carbon steel (nipple, nut, ferrule).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting with UNF SAE female thread - 45° cone seal, with O-rings at the "tail" end (ZC-FR5T-101-04-DN5 without O-rings at the "tail" end), for the FR5T type thermoplastic hose for freon, with an outer layer made of thermoplastic polymer. Allows the connection of rubber hose assemblies with air-conditioning system components. Material: carbon steel (nipple, nut, ferrule).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight spray lance, 50 cm long, or bent at a 15° angle, 70 cm long, insulated, with 1/4" BSP male thread on both sides. Material: AISI 304 steel / plastic (insulation). Working pressure: up to 400 bar. Operating temperature: up to +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpray lance, straight or bent at a 15° angle, uninsulated, with 1/4" BSP male thread on both ends. Available lengths: 25 cm, 50 cm, 60 cm, 70 cm, 90 cm and 120 cm - depending on the version. Material: AISI 304 steel. Working pressure: up to 400 bar. Operating temperature: up to +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight, insulated spray lance, with 1/4" BSP male thread on both sides. Available lengths: 70 cm, 90 cm and 120 cm. Material: AISI 304 steel / plastic (insulation). Working pressure: up to 400 bar. Operating temperature: up to +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight lance with spray nozzle in a blue rubber ferrule. Available in two variants: with nozzle 2530 (1/4" BSPT male, 25°, 30 l/min - 20 bar), terminated with a DN 11.8 quick coupling plug, or with nozzle 1530 (1/4" BSPT male, 15°, 30 l/min - 20 bar), terminated with a 1/2" BSP female thread. Material: stainless steel. Lance length: 25 cm, 50 cm, 60 cm - depending on variant.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for industrial refrigeration systems (an alternative to copper tubing), for domestic and industrial HVAC installations and automotive air conditioning (filling and testing functions only). In particular for R134a, R404A, R407C, R410A, R1234yf, R1234ze, R290, R32 refrigerants and PAG, POE, PVE and AB type compressor oils. Vacuum value: 5 mbar (absolute pressure). Standards: EN 1736, ISO 13971 class I, UL1963. Installation: use ZC-FR type fittings (IT-202). Inner layer: polyamide (PA) separated by a layer of thermoplastic polymer. Reinforcement: polyester braid. Outer layer: black, blue or red polyurethane (PU). Working pressure: 130 bar. Operating temperature: from -40°C to +120°C (momentarily +130°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHoses available only as complete hose assemblies with fittings crimped by Tubes International. For an individual quotation, use the enquiry form in the shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Robust industrial steel hose manufactured in England, with a smaller bending radius and slightly higher working pressure than B-FLEX hose. Made from stainless steel, annularly corrugated, with single or double stainless steel braid. Its profile features tall, closely spaced corrugations, providing excellent flexibility and vibration resistance. Designed for conveying liquids and gases under pressure: water, steam, air, hot oil and chemicals. Safety factor 4:1. Suitable for operation under high vacuum. An AISI 316 steel version is available on special order. Inner layer: corrugated hose made from AISI 321 stainless steel sheet. Reinforcement: single or double AISI 304 steel braid. Working temperature: from -200°C to +700°C (working pressure depends on temperature).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBridge with two DN 13 quick coupling sockets with valves, with a connecting tube 160 mm, 315 mm or 500 mm long. Widely used in industry for cooling injection and casting moulds for plastic, aluminium, brass and zinc alloy parts. Can be used for water in cleaning machines, for hot oil, steam. Series: TST 190. Working pressure: 25 bar. Material: brass (socket body, connector, sleeve), stainless steel (spring, ring, balls). Operating temperature: from -20°C to +200°C (viton).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBridge with two DN 13 quick coupling sockets with valves, with a connecting tube 160 mm, 315 mm or 500 mm long. Widely used in industry for cooling injection molds and die-cast parts made of plastics, aluminum, brass and zinc alloys. Can be used for water in cleaning machines, for hot oil, steam. Series: TST 190. Working pressure: 25 bar. Material: brass (socket body, connection, sleeve, valve), stainless steel (spring, ring, balls). Operating temperature: from -20°C to +200°C (viton).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBridge with two sockets DN 9 of quick couplings without valves, with a connecting tube 125 mm, 250 mm or 500 mm long. Widely used in industry for cooling injection moulds and die-cast parts made of plastics, aluminium, brass and zinc alloys. Can be used for water in cleaning machines, for hot oil, water vapour. Series: TST 090. Working pressure: 25 bar. Material: brass (socket body, connection, sleeve), stainless steel (spring, ring, balls). Operating temperature: from -20°C to +200°C (viton).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBridge with two DN 9 quick coupling sockets with valves, with a connecting tube 125 mm, 250 mm or 500 mm long. Widely used in industry for cooling injection molds and die-cast parts made of plastics, aluminum, brass and zinc alloys. Can be used for water in cleaning machines, for hot oil, steam. Series: TST 090. Working pressure: 25 bar. Material: brass (socket body, connector, sleeve, valve), stainless steel (spring, ring, balls). Operating temperature: from -20°C to +200°C (viton).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThreaded nut for high-pressure connections in the HP version, suitable for working pressures up to 4140 bar. Designed for use with liquid and gaseous media. Material: AISI 316 steel. Working pressure: up to 4140 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThreaded nut, for high-pressure connections in the MP version, suitable for operation under working pressure up to 1380 bar. Designed for use with liquid and gaseous media. Material: AISI 316 steel. Working pressure: up to 1380 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTool for tensioning and cutting Band-It ® Ball-Lok ® self-locking tapes. The tool is lightweight and very easy to operate. Application: Band-It ® Ball-Lok ® tapes.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTool (screw-operated banding tool) for installing Band-It ® Giant steel bands, with a built-in blade for cutting the band. Designed for bands with a thickness of 1.1 mm. Band width: 3/4" ÷ 1.1/4". Maximum band thickness: 1.1 mm.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA pipe nipple for high-pressure connections in the HP version, designed to operate at working pressures up to 4140 bar. Intended for use with liquid and gaseous media. Material: AISI 316 steel. Working pressure: up to 4140 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPipe nipple for high-pressure connections in the MP version, designed to operate at working pressures up to 1380 bar. Intended for use with liquid and gaseous media. Material: AISI 316 steel. Working pressure: up to 1380 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAssembly pliers made of durable plastic for coolant lines in the 3/4" system allow easy assembly of individual segments (except valves, tees and adapters).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHeavy-duty DIN 3015 clamp, type 201 (with top plate), designed for quick, easy, durable and neat fastening of pipes, cables and hoses in various industries, in land-based and marine installations. Manufactured in accordance with DIN 3015. The clamp is mounted to the structure by welding its base (bolting or rail mounting is also possible). As standard, the clamp has a profiled (grooved) pipe bore surface. In addition to standard metal components, extended plates, rails and bolts for mounting clamp assemblies can be ordered. Consult TUBES INTERNATIONAL® when selecting components. Clamp material: rubber. Bolt material: zinc-plated steel. Plate material: zinc-plated steel. Base material: carbon steel. Working temperature: from -40° to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPure-Fit® fitting made of polypropylene (PP) or PVDF in a natural translucent colour. Available in a range of the most popular diameters and wall thicknesses of biopharmaceutical hoses, packed in the manufacturer's certified clean zone, in packs of 250 pcs. (for ID 3/4" - 25 pcs.). The Pure-Fit® fitting of the BarbLock® system should be selected according to the hose's inner and outer diameter. For other hose sizes and smaller quantities, standard blue BarbLock® fittings, packed in the Tubes International clean zone, can be used. Indexes ending in -AL denote a one-piece version, where the fitting's inner and outer ferrule are integrated. Separate tools (manual or pneumatic) are used for assembling individual fitting sizes – contact Tubes International. Sterilization: radiation (PP) or radiation and autoclave (PVDF). Material: polypropylene (PP) or PVDF. Hardness: 85 Shore (A) (PP) or 78 Shore (A) (PVDF). Working pressure: 17 bar (20°C), 7 bar (93°C). Operating temperature: up to 93°C (PP) or up to 135°C (PVDF).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe BarbLock ® clamp is designed for tight and reliable mounting of fittings on flexible hoses. Unlike the various bands and clamps often used, the BarbLock ® clamp provides full-circumference (360°) compression of the hose onto the fitting, guaranteeing complete tightness of the connection. It can be used with low-pressure plastic and elastomer hoses, both unreinforced and braid-reinforced, of various wall thicknesses. Hose fittings made of plastics to be mounted should have the appropriate shape, length and barbs ("tail") for the hose, as well as a retaining collar enabling correct mounting of the clamp. Many types of fittings can be mounted, used in laboratory, biopharmaceutical and medical technology, including Pure-Fit ® SIB ®. The BarbLock ® clamp is made of high-quality, high-purity plastic: polypropylene (PP) or polyvinylidene fluoride (PVDF), meeting the hygienic requirements of USP Class VI and/or USP and ISO 10993-5, free of BPA (Bisphenol A) and animal-derived substances. The BarbLock ® clamp should be selected according to the inner and outer diameter of the hose. Separate tools (manual or pneumatic) are used for mounting individual clamp sizes - contact Tubes International. Items with the -AL fitting suffix are the one-piece version, where the inner and outer ferrule of the clamp are integrated. Material: polypropylene (PP) or PVDF. Hardness: 85 Shore (A) (PP) or 78 Shore (A) (PVDF). Working pressure: 17 bar (20°C), 7 bar (93°C). Operating temperature: up to 93°C (PP) or up to 135°C (PVDF).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover for 1/4" spray nozzles. Available in two versions: polyamide - installed between the nozzle and lance (prevents loss of the cover), or EPDM rubber - slipped over the nozzle (allows easy replacement of the cover).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsShroud with 1/4" BSP female thread for spray nozzles with 1/4" BSPT male thread. Available in two connection variants: with 1/4" BSP female thread or with a DN11.8 quick coupling plug. Material: stainless steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlastic cover for a foam nozzle, primarily designed to protect the surfaces being cleaned, as well as the nozzle, against damage. Installed by sliding it onto the nozzle, allowing easy cover replacement. Nozzle SKU: AK-NOZ50200. Material: polyamide (nylon).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnti-seize assembly paste protects against seizing under high pressure, rust, galvanic corrosion and galling. Contains copper, graphite and aluminium particles. Designed for pins, nuts, bolts, gaskets, valves, guides and press components. Resistant to alkaline mixtures, acids, chemicals, steam, deionised water and seawater. Withstands pressure: up to 2206 bar. Colour: black. Working temperature: from -180°C to +1100°C. Package size: 250 g or 500 g.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRed identification ring, numbered on the body from 0 to 9 for each of the three outer diameters (sizes) of the hose. Used in molding technology, red for heating, blue for cooling. Material: plastic. Color: red.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsIdentification ring in blue colour, numbered on the body from 0 to 9 for each of the three outer diameters (sizes) of the hose. Used in moulding technique, red for heating, blue for cooling. Material: plastic. Colour: blue.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling identification ring, designed for the TST 100.08 series in molding technology (heating / cooling): red identification ring on socket and plug and blue identification ring on socket and plug. Series: TST 100.08. Material: plastic. Color: blue or red.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsIdentification ring for the quick coupling, designed for the TST 100.12 series in molding technology (heating / cooling): red identification ring on the socket and plug, and blue identification ring on the socket and plug. Series: TST 100.12. Material: plastic. Colour: blue or red.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCollar with left-hand thread for high-pressure connections in the HP version, suitable for working pressures up to 4140 bar. Designed for use with liquid and gaseous media. Material: AISI 316 steel. Working pressure: up to 4140 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrust ring with left-hand thread, for high-pressure connections in the MP version, designed to operate at working pressures up to 1380 bar. Intended for use with liquid and gaseous media. Material: AISI 316 steel. Working pressure: up to 1380 bar.
















































