0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Material
        • Spray lance with covered nozzle, with quick-coupling plug DN11.8 or male thread 1/2" BSP, stainless steel
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Straight lance with spray nozzle in a blue rubber ferrule. Available in two variants: with nozzle 2530 (1/4" BSPT male, 25°, 30 l/min - 20 bar), terminated with a DN 11.8 quick coupling plug, or with nozzle 1530 (1/4" BSPT male, 15°, 30 l/min - 20 bar), terminated with a 1/2" BSP female thread. Material: stainless steel. Lance length: 25 cm, 50 cm, 60 cm - depending on variant.
        • Spray nozzle guard 1/4", polyamide or EPDM rubber
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Spray nozzle guard 1/4″, polyamide or EPDM rubber

          All products | Foam- washing- and dosing devices
          0 €
          Cover for 1/4" spray nozzles. Available in two versions: polyamide - installed between the nozzle and lance (prevents loss of the cover), or EPDM rubber - slipped over the nozzle (allows easy replacement of the cover).
        • Spray nozzle guard, 1/4" BSP female, stainless steel
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Spray nozzle guard, 1/4″ BSP female, stainless steel

          All products | Foam- washing- and dosing devices
          0 €
          Shroud with 1/4" BSP female thread for spray nozzles with 1/4" BSPT male thread. Available in two connection variants: with 1/4" BSP female thread or with a DN11.8 quick coupling plug. Material: stainless steel.
        • Nylon foam nozzle guard 1/2", white, type 50200
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Nylon foam nozzle guard 1/2″, white, type 50200

          All products | Foam- washing- and dosing devices
          0 €
          Plastic cover for a foam nozzle, primarily designed to protect the surfaces being cleaned, as well as the nozzle, against damage. Installed by sliding it onto the nozzle, allowing easy cover replacement. Nozzle SKU: AK-NOZ50200. Material: polyamide (nylon).
        • 1 l tank for foam generator, for AKBO multifunction gun
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          1 l tank for foam generator, for AKBO multifunction gun

          All products | Foam- washing- and dosing devices
          0 €
          1 l container for cleaning and foaming agent with a plastic lid. The lid prevents the solution from evaporating from the container and accidental spillage of the contents if work is interrupted. Material: plastic.
        • Bowl for NiTO Clean set, capacity 1.4 litres or 2.5 litres
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bowl for NiTO Clean set, capacity 1.4 litres or 2.5 litres

          All products | Foam- washing- and dosing devices
          0 €
          Cleaning agent tank for NiTO Clean kit. Available in five colours: white, blue, red, green and yellow. The colours help identify the agent being used. Material: polyethylene (HDPE). Capacity: 1.4 litres or 2.5 litres.
        • NiTO Clean set for foam and rinsing: gun NiTO ERGO COMBI + lance 17 cm + bowl 1.4 litres, 10 bar
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Foaming and rinsing set: NITO ERGO COMBI gun (NT-40801A3), 1.4 l cleaning agent tank with foam injector, suction hose and set of 15 dosing nozzles, 17 cm lance with rinsing nozzle. The foam layer generated by the set is spread over the surface to be cleaned. The cleaning and foaming liquid is dispensed from the tank through appropriately sized nozzles (for a specific solution concentration from 0.4% to 10%), then flows through an injector that draws in air, producing a foam stream at the injector nozzle outlet. Once the foam has achieved its cleaning effect, it is rinsed off with water using the rinsing nozzle connected to the gun. The sets are available in various colours. Maximum working pressure: 10 bar. Maximum working temperature: +40°C.
        • NiTO Clean set for foam and rinsing: gun NiTO ERGO COMBI + lance 17 cm + bowl 2.5 litres, 10 bar
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Foaming and washing kit: NITO ERGO COMBI gun (NT-40801A3), 2.5 l cleaning agent tank with foam injector, suction hose and set of 15 dosing nozzles, 17 cm lance with washing nozzle. The foam layer produced by the kit is spread over the surface being cleaned. The cleaning and foaming liquid is dosed from the tank through appropriately sized nozzles (from 0.4% to 10% solution concentration), then flows through an injector that draws in air, producing a foam stream at the injector nozzle outlet. Once the foam has achieved its cleaning effect, it is washed off with water using the washing nozzle attached to the gun. Kits are available in various colours. Maximum working pressure: 10 bar. Maximum working temperature: +40°C.
        • NiTO Clean set for foam and rinsing: NiTO I COMBI gun + lance 17 cm + bowl 2.5 Litra, 6 bar
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Foaming and rinsing kit: NITO I COMBI gun (NT-53105A1), 2.5 l cleaning agent tank with a foam injector, suction hose and a set of 15 dosing nozzles, 17 cm lance with a rinsing nozzle. The layer of foam produced by the kit is spread over the surface being cleaned. The cleaning and foaming liquid is metered from the tank through appropriately sized nozzles (from 0.4% to 10% solution concentration), then flows through an air-aspirating injector, producing a stream of foam at the injector nozzle outlet. Once the foam has achieved its cleaning effect, it is rinsed off with water using the rinsing nozzle attached to the gun. The kits are available in various colours. Maximum working pressure: 6 bar. Maximum working temperature: +40°C.
        Go to Top