- Home
- Industrial fittings
- Band clamping system
Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape for system Band-It® Standard, made of steel AISI 201. Standard to basic system clamping using band in rolls, formed in clamps on hose o any diameter (recommended use double loop tape). should purchase separately Buckles with „noses” securing end tape po bending. assembly using tools BD-C07599, BD-C00189, BDC00399. length: 30.5 m.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape for system Band-It® Standard, made of steel AISI 304. Standard to basic system clamping using band in rolls, formed in clamps on hose o any diameter (recommended use double loop tape). should purchase separately Buckles with „noses” securing end tape po bending. assembly using tools BD-C07599, BD-C00189, BD-C00399. length: 30.5 m.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape for system Band-It® Standard, made of steel AISI 316. Standard to basic system clamping using band in rolls, formed in clamps on hose o any diameter (recommended use double loop tape). should purchase separately Buckles with „noses” securing end tape po bending. assembly using tools BD-C07599, BD-C00189, BD-C00399. length: 30.5 m.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tool for mounting steel bands system Band-It® with built-in a knife for cutting excess tape and spring a gripper improving operation. Allowed band width: 1/4" ÷ 3/4". Maximum wall thickness tape: 0.76 mm. Application: Band-It® Standard and Band-It® Junior - in this case necessary is use adapter BD-J00199.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBuckles for the system band Band-It® Standard. Buckles with so-called "noses" secure the end of the band after bending. Material: steel AISI 201.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp self-closing in full coating epoxy (increased protection against corrosion, Material non-toxic, free od halogens) Intended for easy and simple mounting manual or at use tool for tensioning and cutting (index: BD-KE9229). has high resistance to fire, corrosion, radiation UV and high and low temperatures. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape for system Band-It® Junior, to system clamping using band in ready sections formed in clamps o double loop with built-in a buckle. tape o smooth surface and jej correct assembly on non-serrated hose creates tight fixing fittings preventing leaks for the inside crimp. assembly using tool BD-C00189 with an adapter pre forming clamps BD-J00199. Material: steel AISI 201.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBuckles for the system band Band-It® Standard. Buckles with so-called "noses" secure the end of the band after bending. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape o double loop with built-in a buckle system Band-It® Ultra-Lok® made of steel AISI 201 Intended for most demanding applications. double loop increases strength clamps. tape o smooth surface and jej correct assembly on non-serrated hose creates tight fixing fittings preventing leaks for the inside crimp. assembly using tools electric BD-UL9010 or BD-UL4000B. Do mounting straps 1/2" for devices mounting should use washer adjustment BD-M09387. Material: steel AISI 201.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBuckles for the system band Band-It® Standard. Buckles with so-called "noses" secure the end of the band after bending. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape for mounting information tags system Band-It® Tie-Lok®, made of steel AISI 304. strength, safe, o low-profile the lock and smooth surface internal. Band width: 1/4". Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape for mounting information tags system Band-It® Tie-Lok®, made of steel AISI 304. strength, safe, o low-profile the lock and smooth surface internal. Band width: 1/4". Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBuckles for the system band Band-It® Ultra-Lok®. Material: steel AISI 201.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tag information system identification Band-It® Tie-Lok® for self marking hoses Available in three sizes: 51x19, 63.5x38 and 89x19. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp self-closing uncoated Intended for easy and simple mounting manual or at use tool for tensioning and cutting (index: BD-KE9229). has high resistance to fire, corrosion, radiation UV and high and low temperatures. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp self-closing uncoated Intended for easy and simple mounting manual or at use tool for tensioning and cutting (index: BD-KE9229). has high resistance to fire, corrosion, radiation UV and high and low temperatures. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter system Band-It® Junior. allows assembly bands system Band-It® Junior using tool BD-C00189. Allowed band width: 1/4" - 3/4".
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tool for tensioning and cutting bands for information tags Band-It® Tie-Lok®. Band width: 1/4". Maximum force tension: 130 kG.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tool for mounting steel bands system Band-It® with built-in a knife for cutting excess tape. features compact design and small mass. surfaces metal tools are galvanized. Due to compact dimensions, can be used in space, where available limitation access; features je ease loading tape and jej removal. tool can be used in three various positions – depending on access and for convenience operator: straight, angled and gun – in tej last tightening tape can take place one-handed (other positions require use obu hands). Allowed band width: 1/4" ÷ 3/4". Maximum wall thickness tape: 0.63 mm. Application: Band-It® Standard.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tool for mounting bands system Band-It®. Allowed band width: 3/16" - 3/4". Application: Band-It® Standard. used is when required is greater force pressure (heavy duty).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tag information system identification Band-It® Tie-Lok® for self marking hoses Available in three sizes: 51x19, 63.5x38 and 89x19. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp self-closing partially in coating epoxy (increases protection against corrosion, Material non-toxic, free od halogens) Intended for easy and simple mounting manual or at use tool for tensioning and cutting (index: BD-KE9229). has high resistance to fire, corrosion, radiation UV and high and low temperatures. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape for system Band-It® Giant, made of steel AISI 201. Standard to basic system clamping using band in rolls, formed in clamps on hose o any diameter (recommended use double loop tape). should purchase separately Buckles with „noses” securing end tape po bending. version GIANT Intended for heavy applications (for hoses o large diameters - above 150 mm). assembly using tool BD-G40299. length: 30.5 m.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape for system Band-It® Junior, to system clamping using band in ready sections formed in clamps o double loop with built-in a buckle. tape o smooth surface and jej correct assembly on non-serrated hose creates tight fixing fittings preventing leaks for the inside crimp. assembly using tool BD-C00189 with an adapter pre forming clamps BD-J00199. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape in sections for system Band-It® Ultra-Lok® made of steel AISI 201 Intended for most demanding applications. double loop increases strength clamps. tape o smooth surface and jej correct assembly on non-serrated hose creates tight fixing fittings preventing leaks for the inside crimp. assembly using tools electric BD-UL9010 or BD-UL4000B. Do mounting straps 1/2" for devices mounting should use washer adjustment BD-M09387. Material: steel AISI 201.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBuckles for the system band Band-It® Giant. Buckles for heavy applications (for hoses o large diameters - above 150 mm). Buckles with so-called "noses" secure the end of the band after bending. Material: steel AISI 201.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTool for tensioning and cutting Band-It ® Ball-Lok ® self-locking tapes. The tool is lightweight and very easy to operate. Application: Band-It ® Ball-Lok ® tapes.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTool (screw-operated banding tool) for installing Band-It ® Giant steel bands, with a built-in blade for cutting the band. Designed for bands with a thickness of 1.1 mm. Band width: 3/4" ÷ 1.1/4". Maximum band thickness: 1.1 mm.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLithium-ion battery-powered tool for installing Band-It ® UItra-Lok ® clamps. Supplied in a protective case made of impact-resistant HDPE thermoplastic. The tool comes with: one spare 18 V lithium-ion battery, one charger, a lubrication/assembly tool kit and an instruction manual. Power supply: 18V lithium-ion battery.






































