Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight hose suction-delivery intended for handling milk and substances food, demanding use rubber free of odour and taste. Contains no plasticisers, phthalates or substances of animal origin. special The design hose "CRUSH PROOF" of spiral with plastic allows return hose under pressure for primary shape po accidental running over go e.g. truck forklift. hose is light and easy for handling. hose designed primarily for unloading milk with tankers. Not recommended for heavy conditions use in use process. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, RAL (German institute ensuring quality and certification. Inner layer: white blend NR/NBR. Reinforcement: a synthetic braid, spiral PET. Outer layer: blue synthetic rubber. Working pressure: 16 bar. Vacuum: 0.7 bar. Operating temperature: od -30°C up to +85°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for conveying substances food, demanding use rubber free of odour and taste. Contains no phthalates or bisphenol A. Layer inner with NBR/PVC resistant to used standard in industry food agents and processes cleaning. appropriate for milk and its dairy products and greasy substances food. Widely used in industry food in standard conditions use. Standards and requirements: Food industry, food contact: 1935/2004/EC and 2023/2006/EC (GMP). D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white NBR rubber/PVC. Reinforcement: a synthetic braid, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -15°C up to +90°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and very pliable and flexible hose delivery of reinforcement two braids steel intended for conducting steam saturated o higher pressure. Layer inner resistant to steam o high temperature. Layer outer resistant to high temperature and conditions atmospheric. Do steam water use special fittings bolted screws intended for steam water – precisely selected for diameter and wall thickness hose. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black EPDM rubber. Reinforcement: a double steel braid. Outer layer: red EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: od -40°C up to +210°C (momentarily up to +230°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction-delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). Layer inner with UPE resistant to most aggressive chemicals, antistatic (R 6 Ω), compliant with requirements for hoses food, smooth, o low factor friction during flow, protecting deposition medium on walls. facilitates to significantly cleaning and allows on use also in industry cosmetic, pharmaceutical and food. Reinforcement cord synthetic and spirals steel. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant to abrasion, ozone, conditions atmospheric, fire-resistant. compliant with requirements EN 12115:11 type Ω/T, completely antistatic - ensures discharge charges electrostatic also through wall hose (R 9 Ω). allows to use hose in zones hazard explosion. hose Widely used for many applications in industry chemical. standards and requirements: hoses chemical: EN 12115:2011 (type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, C, D2). assembly: should use fittings with spigot ("tail" for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with UPE. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: black polyethylene UPE. Reinforcement: cord textile, steel spiral. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: od -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction - delivery intended for conveying liquid products industry petrochemical containing up to 50% hydrocarbons aromatic, fuels, gasoline, oil drive, heating, oils lubricating etc. Layer inner with black, smooth, antistatic (dissipating charges electrical 10 4 Ω 9 Ω) rubber NBR. Reinforcement cord synthetic and spirals steel. Layer outer with black rubber NBR, resistant to oil and conditions atmospheric. relatively small weight and flexible The design hose makes, that hose is easy for handling, is characterized wide, universal use for conveying fuels or other compatible media in typical conditions use. Inner layer: black NBR rubber. Reinforcement: cord synthetic, spirals steel. Outer layer: black NBR rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -35°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery RIG STAR D and suction - delivery RIG STAR SD intended is for conveying and handling oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (up to 50% compounds aromatic). It can be used also for cement, barite, water sea and brine. Layer inner with black, smooth, antistatic rubber NBR. It has a copper wire ensuring electrical continuity between the hose ends. Layer outer with rubber chloroprene CR, flame-retardant, resistant to abrasion, ozone, water sea and conditions atmospheric. Designed as a specialist OFFSHORE hose for use on drilling platforms. Widely used on platforms Sea North. can be with success used in use onshore. Inner layer: black NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber CR. Working pressure: 20 bar. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for conveying fuels and liquid products industry petrochemical, containing up to 50% compounds aromatic, m.in. gasoline, oil drive and oil mineral. It can be used for tankers, tanks, stations loading, equipment industrial. hose Widely used in industry and transport in standard conditions use. Layer inner with smooth, black, antistatic (R 6 Ω/m) rubber NBR. Reinforcement cord synthetic and spiral steel. has two cable copper ensuring continuity electrical between fitting hose – under a condition correct connection for ends. Layer outer with black rubber SBR/NBR, antistatic (R 6 Ω/m), resistant to abrasion, oil, ozone and conditions atmospheric. Inner layer: black NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR/NBR. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +85°C (for +100ºC for oil).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft and flexible hose delivery o reinforcement textile intended for conducting steam saturated. Layer inner o sound resistance to high temperature and steam saturated. Layer outer resistant to temperature, abrasion, conditions atmospheric and ozone. hose Widely used in industry for low-pressure steam saturated – for light applications. Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: black EPDM rubber, micro-perforated. Working pressure: 6 bar. Operating temperature: od -40°C up to +170°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum, resistant to UV and ozone. compliant with requirements 1935/2004 CE, FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopeia 3.1.9, BfR XV, Journal Officiel Brochure 1227. at temperature use above +100°C maximum pressure working given in tables should reduced o 1% on each 1°C rise temperatures. factor safety is 4:1. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester, steel spiral (AISI 316). Outer layer: semi-transparent silicone. Operating temperature: od -60°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum. Layer inner hose extruded. compliant with requirements with FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopoeia 3.1.9, BfR XV, Journal Officiel Brochure 1227 and directives CE 1935/2004. maximum vacuum 736.6 mm Hg (0.98 bar). at temperature use above +100°C maximum pressure working given in tables should reduced o 1% on each 1°C rise temperatures. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester, spiral of steel AISI 316. Outer layer: semi-transparent silicone. Operating temperature: od -60°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose delivery made in accordance with technology improvement platinum. Layer inner hose extruded. compliant with requirements FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopoeia 3.1.9, BfR XV A, Journal Officiel Brochure 1227 and directives CE 1935/2004. at temperature use above +100°C maximum pressure working given in tables should reduced o 1% on each 1°C rise temperatures. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester. Outer layer: semi-transparent silicone. Operating temperature: od -60°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction-delivery intended for water, juices, drinks and other products food, reinforced has been spiral with hard PVC, through co hose gained also on lightness. additional resistant to impact spiral, ensures good strength on vacuum and kinking hose. transparent wall whereas, facilitates easy visual control of the flow medium, a no phthalates in material, use hose for conveying milk and its dairy products and alcohols o a concentration up to 50%. not recommended is for oils and greasy substances food. A smooth inner surface reduces flow losses and ensures ease of cleaning. outer surface also smooth, facilitates assembly ends using bands or straps, reduces damage external in result abrasion and facilitates maintaining hose in purity. as hose reinforced only spiral with hard PVC, not having braid, under pressure undergoes a certain elongation, co should take into account in use, especially in temperatures above 40°C. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 5 bar to 7 bar, depending on the diameter hose. Operating temperature: od -15°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible pressure hose delivery general purpose. used for air, water, light chemicals and liquid and semi-liquid products food such as water, juices, drinks, beer, wine, alcohols o a concentration up to 50% (and up to 20% for hoses o index SO-PVCSTAR-CR). Not recommended for substances food containing fats and oils. is suitable for milk and its dairy products (not is suitable for milk and products milk hose o index SO-PVCSTAR-CR). free of phthalates. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1). Dla hoses o index SO-PVCSTAR-CR: 1) general: EU 2015/863 (RoHS 3), EC 1907/2006 (REACH). 2) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C). Hose material: transparent PVC. Reinforcement: a polyester braid. Working pressure: from 8 bar to 22 bar, depending on the diameter hose. Operating temperature: od -15°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose suction-delivery intended for water, juices, drinks, alcohols o a concentration up to 50% (and up to 20% for hoses o index SO-PVCSTAR-MS), and other products food. Not recommended for substances food containing fats and oils. is suitable for milk and its dairy products (with railway not is suitable for milk and products milk hose o index SO-PVCSTAR-MS). Reinforcement spiral with wire steel, embedded in wall, PVC, ensures good resistance to vacuum and kinking hose. smooth surface inner reduces losses flow and ensures ease cleaning. transparent wall allows on easy visual control of the flow. at the absence direct contact with food (in industry, construction, agriculture) It can be used for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons). as hose without braid is characterized a certain elongation under pressure. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Dla hoses o index SO-PVCSTAR-MS: industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: galvanised steel spiral. Working pressure: from 6 bar to 11.5 bar, depending on the diameter hose. Operating temperature: od -15°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for conveying and handling oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (up to 50% compounds aromatic). It can be used also for cement, barite, water sea and brine. Layer inner with black, smooth, antistatic rubber NBR. Reinforcement layers strength cord synthetic. It has a copper wire ensuring electrical continuity between the hose ends. Layer outer with rubber chloroprene CR, flame-retardant, resistant to abrasion, ozone, water sea and conditions atmospheric. Designed as a specialist OFFSHORE hose for use on drilling platforms. Widely used on platforms Sea North. can be with success used in use onshore. Inner layer: black NBR rubber. Reinforcement: cord synthetic. Outer layer: black rubber CR. Working pressure: 20 bar. Operating temperature: od -30°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for conveying liquid products industry petrochemical containing up to 50% hydrocarbons aromatic, fuels, gasoline, oil drive, heating, oils lubricating etc. Layer inner with black, smooth rubber NBR. Reinforcement cord synthetic. has cable copper ensuring continuity electrical between fitting hose – under a condition correct connection for ends. Layer outer with black rubber NBR, resistant to oil and conditions atmospheric. relatively small weight and flexible The design hose makes, that hose is easy for handling, is characterized wide, universal use for conveying fuels or other compatible media in typical conditions use. Inner layer: black NBR rubber. Reinforcement: cord synthetic. Outer layer: black NBR rubber. Working pressure: 10 bar. Operating temperature: od -30°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecialized hose suction-delivery for water and sewage in installations sanitary on ships, boats motor, yachts, etc. hose odorless and impermeable odors of drainage sewage on outside (5-year warranty). Layer outer resistant to factors marine and conditions atmospheric. has resistance to vacuum. compliant with the standard EN ISO 8099. On special order Available version SANITARY STAR / 7 o pressure working 7 bar. length standard: 60 m or 120 m. Inner layer: white synthetic rubber. Reinforcement: braid synthetic, steel spiral. Outer layer: white synthetic rubber. Operating temperature: od -30°C up to +100°C.
