Can the Sandblasting Gun with 0.7L Plastic Container, Series 390 be used safely at pressures above 7 bar for short periods, and what precautions should be taken if doing so?

Sandblasting Gun with 0.7L Plastic Container, Series 390 is rated for normal operation at 4–7 bar with a stated maximum of 8 bar. Short excursions slightly above 7 bar toward the maximum (up to 8 bar) may be feasible, but sustained use above the specified operating range increases risk of component failure, leaks, accelerated wear of the plastic tank and seals, and potential safety hazards. Precautions if operating briefly near the 8 bar maximum: - Inspect the gun, nozzle and tank for damage, cracks or loose fittings before each use. - Ensure all connections are tight and use appropriate rated hoses and fittings for the higher pressure. - Wear full PPE: eye/face shield, gloves, hearing protection and protective clothing. - Limit duration at elevated pressure and monitor for unusual vibration, noise, leaks or heat; stop immediately if observed. - Keep bystanders clear and maintain a safe working distance and secure workpiece. - Do not exceed the stated maximum of 8 bar; if your process requires higher pressure, use equipment specifically rated for that pressure. Following these precautions helps reduce risk, but the safest practice is to operate within the recommended 4–7 bar range.

Sandblasting Gun with 0.7L Plastic Container, Series 390

Q: What abrasive grain sizes are recommended for the Sandblasting Gun with 0.7L Plastic Container, Series 390 to avoid nozzle clogging and ensure optimal results?

For the Sandblasting Gun with 0.7L Plastic Container, Series 390, use mineral abrasive grains in the 0.1–0.8 mm range as specified — this matches the tool’s design and ensures effective surface treatment. To avoid nozzle clogging and get optimal results with the 4 mm nozzle: - Prefer mid-to-fine fractions: 0.2–0.6 mm for the best balance of cutting power and flowability. - Use finer grains (0.1–0.3 mm) for delicate surfaces or detailed work; reduce pressure toward 4–5 bar to prevent overspray and clogging. - Use coarser grains (0.6–0.8 mm) only for heavy rust/scale removal; keep pressure at 6–7 bar and monitor flow to avoid blockages. - Ensure abrasives are dry, well-sieved, and free of fines or dust that promote bridging and clogging. - Maintain proper operating pressure (4–7 bar recommended; max 8 bar) and keep the nozzle clear—periodically shake or tap the container and check for wet or compacted media. Following these guidelines will minimize clogging while delivering consistent, efficient blasting with the Sandblasting Gun with 0.7L Plastic Container, Series 390.

All products, Special air guns/

Additional information

Designed for precision and efficiency, this rust and solid contaminant removal gun is the ideal solution for cleaning hard-to-reach areas with ease. Utilizing mineral abrasive material with a grain size ranging from 0.1 to 0.8 mm, it ensures thorough surface treatment tailored to the type of material being blasted. The tool is equipped with a durable plastic tank offering a 0.7-liter capacity, providing both lightweight handling and sufficient storage for extended use. Its 4 mm nozzle guarantees focused blasting power, while the operating pressure range of 4 to 7 bar, with a maximum of 8 bar, delivers consistent performance under demanding conditions. Designed to function reliably in temperatures from 0°C to +50°C, this versatile blasting gun combines durability, precision, and user comfort. Perfect for workshops, garages, and professional maintenance tasks, it offers an effective way to restore surfaces, extend the life of equipment, and achieve a clean, polished finish even in the most challenging spaces.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]	Enquiry	Catalogue
EW-39012	Sandblasting gun, 1 l tank, plastic, DN7.2 plug	-	8

Designed for precision and efficiency, this rust and solid contaminant removal gun is the ideal solution for cleaning hard-to-reach areas with ease. Utilizing mineral abrasive material with a grain size ranging from 0.1 to 0.8 mm, it ensures thorough surface treatment tailored to the type of material being blasted. The tool is equipped with a durable plastic tank offering a 0.7-liter capacity, providing both lightweight handling and sufficient storage for extended use. Its 4 mm nozzle guarantees focused blasting power, while the operating pressure range of 4 to 7 bar, with a maximum of 8 bar, delivers consistent performance under demanding conditions. Designed to function reliably in temperatures from 0°C to +50°C, this versatile blasting gun combines durability, precision, and user comfort. Perfect for workshops, garages, and professional maintenance tasks, it offers an effective way to restore surfaces, extend the life of equipment, and achieve a clean, polished finish even in the most challenging spaces.