Is the AKBO High Flow Stainless Steel Water Washing & Cleaning Nozzle suitable for continuous use at 16 bar and +60°C?

Yes. The AKBO High Flow Stainless Steel Water Washing & Cleaning Nozzle is specified for continuous use up to 16 bar and a continuous operating temperature of +60°C. Its AISI 304 stainless steel construction, POM cover and EPDM seal are designed for intensive, professional cleaning tasks, and the nozzle’s ratings (working pressure up to 16 bar, continuous temperature up to +60°C) indicate it is suitable for sustained operation under those conditions. Ensure that system components and any connected fittings/hose are also rated for 16 bar and +60°C to maintain safe continuous use.

Can the AKBO High Flow Stainless Steel Water Washing & Cleaning Nozzle be used safely for prolonged cleaning cycles at high flow rates (300–500 l/min) without performance loss?

Yes. The AKBO High Flow Stainless Steel Water Washing & Cleaning Nozzle can be used safely for prolonged cleaning cycles at high flow rates (300–500 l/min) without performance loss, provided operating conditions remain within specified limits. Key points supporting safe prolonged use: - Flow and pressure ratings: It is rated to deliver 300 l/min at 4 bar and up to 500 l/min at 16 bar, so the stated high flow range is within its designed capacity. - Working pressure and temperature: Maximum working pressure is 16 bar and continuous operating temperature up to +60°C, which supports sustained high-flow operation when system pressure and fluid temperature do not exceed these limits. - Construction and durability: AISI 304 stainless steel body, reinforced POM cover, and EPDM sealing provide corrosion resistance and mechanical robustness for intensive, extended use. - Operator control and wear mitigation: Smooth spray-angle adjustment and simple head rotation for opening/closing reduce abrupt shocks and allow controlled operation that helps minimize wear. Precautions: ensure supply pressure stays ≤16 bar and fluid temperature ≤+60°C, use compatible fluids (water), maintain seals and fittings, and perform routine inspection for wear or debris. If your application runs continuously at the upper limits (near 16 bar / 500 l/min) consider periodic maintenance and monitoring to maximize service life.

Nozzle for washing and cleaning water, steel stainless, AKBO High Flow

All products, Low-pressure water spray guns/

Additional information

Nozzle o high flow for washing and cleaning water. ideal for washing large surface e.g. tanks, cars trucks, vessels, in short time. is characterized high flow and strong a stream at low pressure supply. Smooth regulation nozzle – angle spray and opening and shut-off stream through rotation ring the head. made of steel stainless (steel AISI 304), high-strength plastic cover (POM) and ring with rubber EPDM. Working pressure: up to 16 bar. temperature use continuous: up to +60°C. Flow rate: 300 l/min (4 bar), 500 l/min (16 bar). weight: 0.8 kg. Connection: 1″ BSP male.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AK-RSHHH1-WR	Nozzle HIGH FLOW with 1" BSP male (60° cone), AISI 303	-	16	In stock	0 €		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Nozzle o high flow for washing and cleaning water. ideal for washing large surface e.g. tanks, cars trucks, vessels, in short time. is characterized high flow and strong a stream at low pressure supply. Smooth regulation nozzle – angle spray and opening and shut-off stream through rotation ring the head. made of steel stainless (steel AISI 304), high-strength plastic cover (POM) and ring with rubber EPDM. Working pressure: up to 16 bar. temperature use continuous: up to +60°C. Flow rate: 300 l/min (4 bar), 500 l/min (16 bar). weight: 0.8 kg. Connection: 1″ BSP male.