Is the Brass MWSVE Muffler with Drain Choke and GZ suitable for continuous use at 12 bar and temperatures up to +80°C?

Brass MWSVE Muffler with Drain Choke and GZ Format is specified for continuous use up to 12 bar and temperatures up to +80°C. The product’s maximum working pressure is 12 bar and its operating temperature range is -10°C to +80°C, so operating continuously at 12 bar and up to +80°C falls within its stated limits. Ensure proper installation, routine inspection for wear/corrosion, and compliance with your system’s safety margins and applicable standards when running continuously at the upper limits.

Can the Brass MWSVE Muffler with Drain Choke and GZ be cleaned or serviced in-line without depressurizing the system?

Can the Brass MWSVE Muffler with Drain Choke and GZ be cleaned or serviced in-line without depressurizing the system? No. The Brass MWSVE Muffler with Drain Choke and GZ is intended to be installed in compressed air systems under pressure, but cleaning or servicing it in-line without depressurizing the system is not recommended. Although constructed from durable nickel-plated brass and sintered bronze with a stainless-steel spring and rated to 12 bar, attempting maintenance while the system is pressurized poses safety risks (air blast, debris ejection) and can damage internal elements. For safe and effective cleaning or servicing, depressurize the system, remove the muffler, perform the required maintenance or replacement, and then reinstall following proper procedures.

Silencer with a throttle trigger MWSVE with male thread, brass

All products, Equipment for pneumatic valves/

Additional information

Material	B – brass (bronze)

Silencer with a throttle trigger MWSVE with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 45° od axis silencer, is average depending on size 25 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Material spring: steel stainless. Operating temperature: od -10°C up to +80°C. Working pressure: 12 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-W0970520001	Silencer with throttling MW SVE, brass/bronze nickel-plated, 1/8" BSP male	-	-	In stock	Enquiry
MW-W0970520002	Silencer with throttling MW SVE, brass/bronze nickel-plated, 1/4" BSP male	-	-	In stock	Enquiry
MW-W0970520003	Silencer with throttling MW SVE, brass/bronze nickel-plated, 3/8" BSP male	-	-	In stock	Enquiry
MW-W0970520004	Silencer with throttling MW SVE, brass/bronze nickel-plated, 1/2" BSP male	-	-	In stock	Enquiry
MW-W0970520005	Silencer with throttling MW SVE, brass/bronze nickel-plated, 3/4" BSP male	-	-	In stock	Enquiry
MW-W0970520006	Silencer with throttling MW SVE, brass/bronze nickel-plated, 1" BSP male	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Silencer with a throttle trigger MWSVE with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 45° od axis silencer, is average depending on size 25 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Material spring: steel stainless. Operating temperature: od -10°C up to +80°C. Working pressure: 12 bar.