Is the RI-BE Screw Connection, Carbon Steel compatible with standard BSP hydraulic ports and seals?

RI-BE Screw Connection, Carbon Steel Format: Yes. The RI-BE uses external BSP threads with DIN 3852 type E sealing—an elastomer gasket with a rectangular cross-section—combined with an internal BSP thread for additional thread sealing. This design is compatible with standard BSP hydraulic ports and seals, providing secure, leak-resistant mating when used with corresponding BSP ports prepared for DIN 3852 type E gaskets. Made of carbon steel with a galvanized finish, it also offers corrosion and wear protection suitable for typical hydraulic systems. Ensure mating ports accept DIN 3852 type E elastomer gaskets and follow proper torque and installation practices for reliable performance.

Does the RI-BE Screw Connection, Carbon Steel require a specific torque value for brazing or installation to ensure proper sealing with the elastomer gasket?

RI-BE Screw Connection, Carbon Steel Format does not require a specific torque value for brazing because brazing is not part of its sealing method. Sealing is achieved by the elastomer gasket with rectangular cross-section (DIN 3852 type E) on the external BSP thread; the internal BSP thread provides additional thread sealing. Proper sealing depends on correct gasket placement, clean and undamaged threads, and tightening to a controlled torque recommended for the thread size and material to compress the gasket without damaging it. Use manufacturer or DIN-referenced torque guidelines for carbon steel BSP fittings of the corresponding thread diameter; if no specific value is provided, tighten until gasket compression and leak-tightness are achieved, typically using a calibrated torque wrench and verifying by pressure test. Avoid over-tightening (which can deform the gasket or damage threads) and under-tightening (which can cause leaks). If precise torque figures are required for your application, consult the fitting manufacturer’s datasheet or DIN 3852/DIN 2353 references.

RI-BE Screw Connection, Carbon Steel

Additional information

Material	CS – steel (cast iron)

The DIN 2353 screw connection type RI-BE is a high-quality hydraulic fitting designed to ensure reliable and leak-free performance in demanding applications. Featuring an external BSP thread with sealing according to DIN 3852 type E, it utilizes an elastomer gasket with a rectangular cross-section for secure and durable sealing. The internal BSP thread provides additional thread sealing, making the connection highly resistant to pressure fluctuations and fluid leakage. Manufactured from robust carbon steel and finished with a galvanized coating, this fitting offers excellent protection against corrosion and mechanical wear, ensuring long service life even in harsh operating environments. Its precise engineering guarantees easy installation, compatibility with standardized hydraulic systems, and dependable performance under high loads. Ideal for industrial, mobile, and hydraulic applications, the RI-BE connection combines strength, safety, and efficiency, making it a trusted choice for professionals seeking durable and maintenance-friendly solutions.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
HD-RI-02-04-BE	GZ 1/8" BSP connector, seal E, GW 1/4" BSP	-	400
HD-RI-04-02-BE	GZ 1/4" BSP connector, seal E, GW 1/8" BSP	-	400
HD-RI-04-06-BE	GZ 1/4" BSP connector, seal E, GW 3/8" BSP	-	400
HD-RI-04-08-BE	GZ 1/4" BSP connector, seal E, GW 1/2" BSP	-	400
HD-RI-06-02-BE	GZ 3/8" BSP connector, seal E, GW 1/8" BSP	-	400
HD-RI-06-04-BE	GZ 3/8" BSP connector, seal E, GW 1/4" BSP	-	400
HD-RI-06-08-BE	GZ 3/8" BSP connector, seal E, GW 1/2" BSP	-	400
HD-RI-08-02-BE	GZ 1/2" BSP connector, seal E, GW 1/8" BSP	-	400
HD-RI-08-04-BE	GZ 1/2" BSP connector, seal E, GW 1/4" BSP	-	400
HD-RI-08-06-BE	GZ 1/2" BSP connector, seal E, GW 3/8" BSP	-	400
HD-RI-08-12-BE	GZ 1/2" BSP connector, seal E, GW 3/4" BSP	-	315
HD-RI-12-04-BE	GZ 3/4" BSP connector, seal E, GW 1/4" BSP	-	315
HD-RI-12-06-BE	GZ 3/4" BSP connector, seal E, GW 3/8" BSP	-	315
HD-RI-12-08-BE	GZ 3/4" BSP connector, seal E, GW 1/2" BSP	-	315
HD-RI-12-16-BE	GZ 3/4" BSP connector, seal E, GW 1" BSP	-	315
HD-RI-16-04-BE	GZ 1" BSP connector, seal E, GW 1/4" BSP	-	315
HD-RI-16-06-BE	GZ 1" BSP connector, seal E, GW 3/8" BSP	-	315
HD-RI-16-08-BE	GZ 1" BSP connector, seal E, GW 1/2" BSP	-	315
HD-RI-16-12-BE	Connector GZ 1" BSP, seal E, G 3/4" BSP	-	315
HD-RI-20-08-BE	GZ 1.1/4" BSP connector, seal E, GW 1/2" BSP	-	315
HD-RI-20-12-BE	GZ 1.1/4" BSP connector, seal E, GW 3/4" BSP	-	315
HD-RI-20-16-BE	Connector GZ 1.1/4" BSP, seal E, GW 1" BSP	-	315
HD-RI-20-24-BE	GZ 1.1/4" BSP connector, seal E, GW 1.1/2" BSP	-	250
HD-RI-24-08-BE	GZ 1.1/2" BSP connector, seal E, GW 1/2" BSP	-	250
HD-RI-24-12-BE	GZ 1.1/2" BSP connector, seal E, GW 3/4" BSP	-	250
HD-RI-24-16-BE	GZ 1.1/2" BSP connector, seal E, GW 1" BSP	-	250
HD-RI-24-20-BE	GZ 1.1/2" BSP connector, seal E, GW 1.1/4" BSP	-	250

The DIN 2353 screw connection type RI-BE is a high-quality hydraulic fitting designed to ensure reliable and leak-free performance in demanding applications. Featuring an external BSP thread with sealing according to DIN 3852 type E, it utilizes an elastomer gasket with a rectangular cross-section for secure and durable sealing. The internal BSP thread provides additional thread sealing, making the connection highly resistant to pressure fluctuations and fluid leakage. Manufactured from robust carbon steel and finished with a galvanized coating, this fitting offers excellent protection against corrosion and mechanical wear, ensuring long service life even in harsh operating environments. Its precise engineering guarantees easy installation, compatibility with standardized hydraulic systems, and dependable performance under high loads. Ideal for industrial, mobile, and hydraulic applications, the RI-BE connection combines strength, safety, and efficiency, making it a trusted choice for professionals seeking durable and maintenance-friendly solutions.