How does the Compressed Air Reducing Valve with REG Lock, No End Plates – SKILLAIR® Series handle rapid inlet pressure spikes and what are recommended settings to prevent overshoot?

Compressed Air Reducing Valve with REG Lock, No End Plates – SKILLAIR® Series handles rapid inlet pressure spikes through robust internal regulation and high flow capacity that absorb transient changes without large downstream fluctuations. Its precise pressure-reducing mechanism and REG Lock minimize overshoot by holding the set output pressure even when supply pressure momentarily rises. To prevent overshoot during rapid spikes, use these recommended settings and practices: - Select appropriate size for required flow: size 100 for up to 1600 l/min, 200 for up to 3500 l/min, 300 for up to 7000 l/min (values at 6 bar input, 1 bar drop). Adequate sizing reduces sensitivity to inlet transients. - Keep output setpoint well below maximum supply margin (e.g., at least 1–2 bar lower than supply limit) to maintain headroom and avoid hitting supply limits that provoke overshoot. - Use the lower-range output options (0–2, 0–4 bar, etc.) when precise low-pressure control is needed; finer control reduces tendency to overshoot. - Install a pressure gauge on the BSP 1/8" port to monitor fast changes and verify tuning. - When inlet spikes are expected, consider adding upstream damping or a surge absorber and avoid excessive downstream demand spikes that could interact with regulator dynamics. - For systems near maximum supply (13–15 bar), allow conservative setpoints and test dynamic response under expected spike conditions to confirm stability. These measures leverage the SKILLAIR® REG’s precision and flow capability to minimize overshoot and protect downstream equipment.

Compressed Air Reducing Valve with REG Lock, No End Plates – SKILLAIR® Series

Q: What maintenance is required for the Compressed Air Reducing Valve with REG Lock, No End Plates – SKILLAIR® Series to ensure long-term reliable performance?

To ensure long-term reliable performance of the Compressed Air Reducing Valve with REG Lock, No End Plates – SKILLAIR® Series, perform the following maintenance: - Regular inspection: visually check valve body, connections and REG Lock for leaks, corrosion or damage; ensure BSP fittings and gauge port remain tight. - Filter and air quality: maintain clean inlet air—install/replace upstream filters and condensate separators to prevent particulates and water ingress that impair regulation. - Drain and dry system: routinely remove condensate from upstream filters and air receivers to avoid internal corrosion and sticking components. - Functional checks: periodically verify set output pressure across the available ranges (0–2, 0–4, 0–8, 0–12 bar) and confirm stable regulation under varying loads; check maximum supply pressure does not exceed 15 bar (13 bar for sizes 200/300). - Lubrication: follow manufacturer guidance if any moving parts require lubrication; otherwise ensure compatible, clean pneumatic conditions to avoid need for extra lubrication. - Pressure gauge: inspect and calibrate the gauge connected to the BSP 1/8" port to ensure accurate readings. - Temperature and environment: keep operating environment within specified limits (≤ +50°C) and protect valve from extreme temperatures, vibration or contaminants. - Performance verification: monitor flow capacity periodically (1600 l/min for size 100, 3500 l/min for size 200, 7000 l/min for size 300 at 6 bar input with 1 bar drop) to detect flow restrictions. - Scheduled servicing: establish maintenance intervals based on application severity; replace worn seals or components promptly and use original or approved spare parts. Following these steps preserves precision, energy efficiency and durability of the Compressed Air Reducing Valve with REG Lock, No End Plates – SKILLAIR® Series.

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	50

The REG pressure reducing valve from the SKILLAIR® series, designed without end plates, ensures precise regulation of operating pressure, guaranteeing reliable performance and protection of connected devices. Available in sizes 100, 200, and 300, it offers a wide range of output pressures from 0–2, 0–4, 0–8, up to 0–12 bar, with a maximum supply pressure of 15 bar (13 bar for sizes 200 and 300). Engineered for versatility, it operates efficiently at temperatures up to +50°C and provides flexible installation options with BSP connections from 1/4″ to 1″, as well as a BSP 1/8″ port for pressure gauge integration. Delivering outstanding flow capacity, the valve achieves 1600 l/min in size 100, 3500 l/min in size 200, and up to 7000 l/min in size 300 at 6 bar input pressure with a 1 bar pressure drop. Combining durability, precision, and high performance, the SKILLAIR® REG valve is the ideal solution for applications requiring stable pressure control, optimized energy efficiency, and long-lasting reliability in demanding pneumatic systems.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-3210001A	REG 100 02 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-3210002A	REG 100 04 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-3210003A	REG 100 08 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-3210004A	REG 100 012 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-3410003A	REG 200 08 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-3410004A	REG 200 012 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-4410000A	REG 300 02 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-4410002A	REG 300 08 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-4410003A	REG 300 012 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The REG pressure reducing valve from the SKILLAIR® series, designed without end plates, ensures precise regulation of operating pressure, guaranteeing reliable performance and protection of connected devices. Available in sizes 100, 200, and 300, it offers a wide range of output pressures from 0–2, 0–4, 0–8, up to 0–12 bar, with a maximum supply pressure of 15 bar (13 bar for sizes 200 and 300). Engineered for versatility, it operates efficiently at temperatures up to +50°C and provides flexible installation options with BSP connections from 1/4″ to 1″, as well as a BSP 1/8″ port for pressure gauge integration. Delivering outstanding flow capacity, the valve achieves 1600 l/min in size 100, 3500 l/min in size 200, and up to 7000 l/min in size 300 at 6 bar input pressure with a 1 bar pressure drop. Combining durability, precision, and high performance, the SKILLAIR® REG valve is the ideal solution for applications requiring stable pressure control, optimized energy efficiency, and long-lasting reliability in demanding pneumatic systems.