Is the DIN 3016 Rubber P-Clip Clamp, 20 mm Strap, Carbon Steel suitable for outdoor use and resistant to UV and weathering?

Yes. The DIN 3016 Rubber P-Clip Clamp, 20 mm Strap, Carbon Steel is suitable for outdoor use and offers strong resistance to UV and weathering. Its EPDM rubber profile provides excellent resistance to water, wear, temperature fluctuations and aging (including good UV resistance), while the precision-bent galvanized carbon steel (W1) construction and reinforced steel end plates deliver durability and corrosion protection appropriate for demanding environments. Note: longevity outdoors can be further improved by selecting appropriate fasteners and considering exposure to highly corrosive atmospheres (marine environments may require higher-grade stainless steel).

How does the EPDM rubber in the DIN 3016 Rubber P-Clip Clamp, 20 mm Strap, Carbon Steel perform in high-temperature and oil-exposure conditions?

The EPDM rubber in the DIN 3016 Rubber P-Clip Clamp, 20 mm Strap, Carbon Steel performs well under high-temperature and oil-exposure conditions typical for many industrial and mechanical applications. EPDM offers excellent resistance to temperature fluctuations and aging, maintaining elasticity and vibration-damping properties across a broad temperature range; this helps the clamp retain cushioning and abrasion protection even when components heat up during operation. EPDM is also highly resistant to water and weathering, further supporting long-term performance in demanding environments. However, EPDM has limited compatibility with many petroleum-based oils, fuels, and certain hydrocarbons. Prolonged direct exposure to mineral oils or aggressive hydrocarbons can lead to swelling, softening or deterioration, which may reduce the rubber’s mechanical damping and protective functions over time. For applications where continuous contact with engine oils, fuel, or strong hydrocarbon solvents is expected, consider verifying chemical compatibility for the specific fluids involved or selecting a clip with a rubber material rated for oil resistance (e.g., NBR/Buna-N or fluoroelastomer) to ensure long-term reliability.

A clamp assembly DIN 3016 RUBBER P-CLIP, width tape 20 mm, steel carbon

Additional information

Material	CS – steel (cast iron)

A clamp RUBBER P-CLIP compliant with the standard DIN 3016 recommended for safe and damping vibrations mounting pipes, hoses, bundles cables, corrugated pipes electrical-installation (cover on cables) etc., for which exists possibility abrasion and damage. A clamp this type found wide use, m.in.: machine agricultural and construction, design engines combustion, industry railway, equipment electric, equipment AGD etc. made is with one section bent tape steel and rubber flange. holes on obu ends tape are reinforced steel plates, co ensures strength on clamping at large loads mechanical. tape made of carbon steel galvanized (W1), profile with rubber EPDM resistant to water, abrasion, changes temperatures and aging. A clamp not contains screws, washer and a nut. Material: steel carbon, galvanized (tape), EPDM rubber (flange). Band width: 20 mm.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AB-03005510	Clamp RUBBER P-CLIP 11 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005528	Clamp RUBBER P-CLIP 12 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005536	Clamp RUBBER P-CLIP 13 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005544	Clamp RUBBER P-CLIP 14 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005552	Clamp RUBBER P-CLIP 15 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005560	Clamp RUBBER P-CLIP 16 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005579	Clamp RUBBER P-CLIP 18 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005587	Clamp RUBBER P-CLIP 19 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005595	Clamp RUBBER P-CLIP 20 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005608	Clamp RUBBER P-CLIP 21 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005616	Clamp RUBBER P-CLIP 22 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005624	Clamp RUBBER P-CLIP 23 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005632	Clamp RUBBER P-CLIP 24 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005640	Clamp RUBBER P-CLIP 25 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005667	Clamp RUBBER P-CLIP 27 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005675	Clamp RUBBER P-CLIP 28 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005683	Clamp RUBBER P-CLIP 29 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005691	Clamp RUBBER P-CLIP 30 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005712	Clamp RUBBER P-CLIP 32 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005739	Clamp RUBBER P-CLIP 34 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005747	Clamp RUBBER P-CLIP 35 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005755	Clamp RUBBER P-CLIP 36 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005771	Clamp RUBBER P-CLIP 38 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005798	Clamp RUBBER P-CLIP 40 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005819	Clamp RUBBER P-CLIP 42 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005843	Clamp RUBBER P-CLIP 45 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005878	Clamp RUBBER P-CLIP 48 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005894	Clamp RUBBER P-CLIP 50 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005915	Clamp RUBBER P-CLIP 52 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005940	Clamp RUBBER P-CLIP 55 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03005990	Clamp RUBBER P-CLIP 60 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03006029	Clamp RUBBER P-CLIP 63 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03006045	Clamp RUBBER P-CLIP 65 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03006096	Clamp RUBBER P-CLIP 70 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03006117	Clamp RUBBER P-CLIP 72 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03006141	Clamp RUBBER P-CLIP 75 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03006168	Clamp RUBBER P-CLIP 77 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03006192	Clamp RUBBER P-CLIP 80 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03006248	Clamp RUBBER P-CLIP 85 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03006299	Clamp RUBBER P-CLIP 90 mm, width 20 mm, W1	-	-	In stock	Enquiry
AB-03007163	Clamp RUBBER P-CLIP 110 mm, width 20 mm, W1	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A clamp RUBBER P-CLIP compliant with the standard DIN 3016 recommended for safe and damping vibrations mounting pipes, hoses, bundles cables, corrugated pipes electrical-installation (cover on cables) etc., for which exists possibility abrasion and damage. A clamp this type found wide use, m.in.: machine agricultural and construction, design engines combustion, industry railway, equipment electric, equipment AGD etc. made is with one section bent tape steel and rubber flange. holes on obu ends tape are reinforced steel plates, co ensures strength on clamping at large loads mechanical. tape made of carbon steel galvanized (W1), profile with rubber EPDM resistant to water, abrasion, changes temperatures and aging. A clamp not contains screws, washer and a nut. Material: steel carbon, galvanized (tape), EPDM rubber (flange). Band width: 20 mm.