Is the DYROS 90 Quick Connector Plug for Injection Molds with Tube, No Valve compatible with standard 14 mm cooling lines and 15 bar systems?

Yes. The DYROS 90 Quick Connector Plug for Injection Molds with Tube, No Valve is specified for a 14 mm tube diameter and a working pressure up to 15 bar, so it is compatible with standard 14 mm cooling lines and 15 bar systems. Its brass construction and valve-free design make it suitable for integration into cooling circuits in plastic processing, providing durable, secure, and efficient connections for those conditions.

Can the DYROS 90 Quick Connector Plug for Injection Molds with Tube, No Valve be used with different tube materials (e.g., PTFE, rubber) at 15 bar and varying temperatures?

Yes — but with important limits. The DYROS 90 Quick Connector Plug for Injection Molds with Tube, No Valve is rated to 15 bar and is mechanically robust (brass body), so it can be used with different tube materials (PTFE, rubber, etc.) provided the tube selected is compatible with the coupling’s 14 mm diameter, the application pressure (≤15 bar), and the operating temperature range. Recommendations and caveats: - PTFE: excellent chemical and temperature resistance; suitable if your process temperatures are high and you keep pressure ≤15 bar. Ensure proper fitting to maintain a secure seal with the valve‑free plug. - Rubber (various elastomers): good flexibility and sealing at moderate temperatures; check the specific rubber compound’s temperature and chemical compatibility. Some rubbers degrade at elevated temperatures or with certain coolants/solvents. - Temperature effects: elevated temperatures can reduce tube hoop strength and sealing ability; low temperatures can stiffen some rubbers and cause leaks. Confirm the tube’s rated temperature range matches your process. - Installation: ensure correct tube outer diameter (14 mm) and secure connection (clamping/adhesive/fit) to avoid leaks under dynamic conditions. - Safety margin: operate below the max 15 bar rating and follow tube manufacturer specs for pressure/temperature derating. - Compatibility check: always verify chemical compatibility of tube material with fluids/gases used and perform pressure/temperature testing in your system before full operation. In summary: technically feasible, but choose tube material based on temperature, chemical exposure and pressure derating, ensure proper 14 mm fit, and validate with testing.

Plug quick coupling for moulds injection with tube without valve, DYROS series 90

Additional information

Material	B – brass (bronze)

Plug quick coupling DYROS series 90 with tube o diameter 14 mm without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-N908-150	Plug DN 9 with tube 14 mm, L=150 mm, without valve	-	15	In stock	Enquiry
DY-N908-300	Plug DN 9 with tube 14 mm, L=300 mm, without valve	-	15	In stock	Enquiry
DY-N908-450	Plug DN 9 with tube 14 mm, L=450 mm, without valve	-	15	In stock	Enquiry
DY-N908-70	Plug DN 9 with tube 14 mm, L=70 mm, without valve	-	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Plug quick coupling DYROS series 90 with tube o diameter 14 mm without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.