Is the Insert DIN 3015 Heavy Rubber Type 201 suitable for outdoor use across its full -40°C to +80°C operating range?

Insert DIN 3015 Heavy Rubber Type 201 is specified with an operating temperature range of -40°C to +80°C and is made from high-quality rubber designed for durability and flexibility in demanding industrial environments. Based on this description, it is suitable for outdoor use across its full -40°C to +80°C range, offering consistent functionality in low temperatures and resistance to heat exposure typical of many outdoor applications. However, true long-term outdoor suitability also depends on additional factors not detailed in the description: UV and ozone resistance, exposure to chemicals, salt spray or marine conditions, and mechanical wear from sunlight or debris. If the installation will face prolonged UV/ozone exposure, aggressive chemicals, or coastal environments, confirm with the manufacturer that the rubber compound includes UV/ozone stabilizers and appropriate chemical/salt resistance.

Does the Insert DIN 3015 Heavy Rubber Type 201 resist oil, fuel, and common hydraulic fluids used in industrial systems?

Insert DIN 3015 Heavy Rubber Type 201 demonstrates good general chemical resistance typical of high-quality industrial rubber and is designed for use in hydraulic, pneumatic, and mechanical systems. Its material and construction provide durability and flexibility across a wide temperature range (-40°C to +80°C), which supports exposure to many common industrial environments. However, the product description does not explicitly list compatibility with specific oils, fuels, or hydraulic fluids. While many industrial rubbers resist mineral oils and standard hydraulic fluids, compatibility varies by rubber compound (e.g., NBR, EPDM, FKM). For assured resistance to particular oils, fuels, or specialized hydraulic fluids, confirm the exact rubber compound used in Insert DIN 3015 Heavy Rubber Type 201 and check its chemical compatibility data or request manufacturer testing/certification for the fluids in your system.

Insert DIN 3015 Heavy Rubber Type 201

All products, Clamps for hydraulic pipes/

Additional information

Material	P – material (plastic)
Standard length [m]	10, 2

The two-part insert of the DIN 3015 type 201 clamp is manufactured in compliance with the DIN 3015 standard, ensuring reliable performance and precise fit. Designed with a profiled, grooved surface inside the pipe opening, it provides secure positioning and minimizes vibration, enhancing the stability of the entire installation. Produced from high-quality rubber, the insert combines durability with flexibility, making it suitable for demanding industrial environments. With an operating temperature range from -40°C to +80°C, it guarantees consistent functionality both in low-temperature conditions and in applications exposed to heat. This solution is ideal for securing pipes, hoses, and tubes in hydraulic, pneumatic, and mechanical systems, offering long-lasting protection and optimized performance.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TC-RB201-106,4X	DIN3015 heavy RB insert for 6.4 mm pipe	-	-	In stock	Enquiry
TC-RB201-106X	DIN3015 heavy RB insert for 6 mm pipe	-	-	In stock	Enquiry
TC-RB201-108X	DIN3015 heavy RB insert for 8 mm pipe	-	-	In stock	Enquiry
TC-RB201-109,5X	DIN3015 heavy RB clamp for 9.5 mm pipe	-	-	In stock	Enquiry
TC-RB201-110X	DIN3015 heavy RB insert for 10 mm pipe	-	-	In stock	Enquiry
TC-RB201-112,7X	DIN3015 heavy RB clamp for 12.7 mm pipe	-	-	In stock	Enquiry
TC-RB201-112X	DIN3015 heavy RB insert for 12 mm pipe	-	-	In stock	Enquiry
TC-RB201-113,5X	DIN3015 heavy RB clamp for 13.5 mm pipe	-	-	In stock	Enquiry
TC-RB201-114X	DIN3015 heavy RB insert for 14 mm pipe	-	-	In stock	Enquiry
TC-RB201-115X	DIN3015 heavy RB insert for 15 mm pipe	-	-	In stock	Enquiry
TC-RB201-116X	DIN3015 heavy RB insert for 16 mm pipe	-	-	In stock	Enquiry
TC-RB201-117,2X	DIN3015 heavy RB clamp for 17.2 mm pipe	-	-	In stock	Enquiry
TC-RB201-118X	DIN3015 heavy RB insert for 18 mm pipe	-	-	In stock	Enquiry
TC-RB201-219X	DIN3015 heavy RB insert for 19 mm pipe	-	-	In stock	Enquiry
TC-RB201-220X	DIN3015 heavy RB insert for 20 mm pipe	-	-	In stock	Enquiry
TC-RB201-221,3X	DIN3015 heavy RB clamp for 21.3 mm pipe	-	-	In stock	Enquiry
TC-RB201-222X	DIN3015 heavy RB insert for 22 mm pipe	-	-	In stock	Enquiry
TC-RB201-225,4X	DIN3015 heavy RB insert for 25.4 mm pipe	-	-	In stock	Enquiry
TC-RB201-225X	DIN3015 heavy RB insert for 25 mm pipe	-	-	In stock	Enquiry
TC-RB201-226,9X	DIN3015 heavy RB clamp for 26.9 mm pipe	-	-	In stock	Enquiry
TC-RB201-228X	DIN3015 heavy RB insert for 28 mm pipe	-	-	In stock	Enquiry
TC-RB201-230X	DIN3015 heavy RB insert for 30 mm pipe	-	-	In stock	Enquiry
TC-RB201-330X	DIN3015 heavy RB insert for 30 mm pipe	-	-	In stock	Enquiry
TC-RB201-332X	DIN3015 heavy RB insert for 32 mm pipe	-	-	In stock	Enquiry
TC-RB201-333,7X	DIN3015 heavy RB insert for 33.7 mm pipe	-	-	In stock	Enquiry
TC-RB201-335X	DIN3015 heavy RB insert for 35 mm pipe	-	-	In stock	Enquiry
TC-RB201-338X	DIN3015 heavy RB pipe support for 38 mm pipe	-	-	In stock	Enquiry
TC-RB201-340X	DIN3015 heavy RB insert for 40 mm pipe	-	-	In stock	Enquiry
TC-RB201-342,4X	DIN3015 heavy RB clamp for 42.4 mm pipe	-	-	In stock	Enquiry
TC-RB201-342X	DIN3015 heavy RB insert for 42 mm pipe	-	-	In stock	Enquiry
TC-RB201-438X	DIN3015 heavy RB insert for 38 mm pipe	-	-	In stock	Enquiry
TC-RB201-442,4X	DIN3015 heavy RB clamp for 42.4 mm pipe	-	-	In stock	Enquiry
TC-RB201-442X	DIN3015 heavy RB insert for 42 mm pipe	-	-	In stock	Enquiry
TC-RB201-444,5X	DIN3015 heavy RB pipe support for 44.5 mm pipe	-	-	In stock	Enquiry
TC-RB201-448,3X	DIN3015 heavy RB pipe support for 48.3 mm pipe	-	-	In stock	Enquiry
TC-RB201-450,8X	DIN3015 heavy RB insert for 45.8 mm pipe	-	-	In stock	Enquiry
TC-RB201-450X	DIN3015 heavy RB insert for 50 mm pipe	-	-	In stock	Enquiry
TC-RB201-455X	DIN3015 heavy RB insert for 55 mm pipe	-	-	In stock	Enquiry
TC-RB201-457X	DIN3015 heavy RB insert for 57 mm pipe	-	-	In stock	Enquiry
TC-RB201-460,3X	DIN3015 heavy RB clamp for 60.3 mm pipe	-	-	In stock	Enquiry
TC-RB201-463,5X	DIN3015 heavy RB insert for 63.5 mm pipe	-	-	In stock	Enquiry
TC-RB201-465X	DIN3015 heavy RB insert for 65 mm pipe	-	-	In stock	Enquiry
TC-RB201-470X	DIN3015 heavy RB insert for 70 mm pipe	-	-	In stock	Enquiry
TC-RB201-565X	DIN3015 heavy RB insert for 65 mm pipe	-	-	In stock	Enquiry
TC-RB201-570X	DIN3015 heavy RB insert for 70 mm pipe	-	-	In stock	Enquiry
TC-RB201-575X	DIN3015 heavy RB insert for 75 mm pipe	-	-	In stock	Enquiry
TC-RB201-576,1X	DIN3015 heavy RB clamp for 76.1 mm pipe	-	-	In stock	Enquiry
TC-RB201-580X	DIN3015 heavy RB insert for 80 mm pipe	-	-	In stock	Enquiry
TC-RB201-582,5X	DIN3015 heavy RB insert for 82.5 mm pipe	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The two-part insert of the DIN 3015 type 201 clamp is manufactured in compliance with the DIN 3015 standard, ensuring reliable performance and precise fit. Designed with a profiled, grooved surface inside the pipe opening, it provides secure positioning and minimizes vibration, enhancing the stability of the entire installation. Produced from high-quality rubber, the insert combines durability with flexibility, making it suitable for demanding industrial environments. With an operating temperature range from -40°C to +80°C, it guarantees consistent functionality both in low-temperature conditions and in applications exposed to heat. This solution is ideal for securing pipes, hoses, and tubes in hydraulic, pneumatic, and mechanical systems, offering long-lasting protection and optimized performance.