Is the 90° Flat Bore Coolant Nozzle, 1/2" System, JETON compatible with standard M8 coolant fittings?

No — the 90° Flat Bore Coolant Nozzle, 1/2" System, JETON is designed for a 1/2" system and features eight 4.2 mm holes; its description does not indicate an M8 thread or interface. Standard M8 coolant fittings use an M8 thread form and typically mate with components specifically manufactured with M8 threads. Because the JETON nozzle is specified as a 1/2" system, it will not be directly compatible with standard M8 fittings without an appropriate adapter or connector engineered to transition between 1/2" and M8 interfaces.

Can the 90° Flat Bore Coolant Nozzle, 1/2" System, JETON be used with high-viscosity coolants or coolant additives without affecting flow and performance?

The 90° Flat Bore Coolant Nozzle, 1/2" System, JETON can be used with moderately higher-viscosity coolants and common coolant additives, but there are practical limits to maintain proper flow and performance. Key points: - The nozzle’s eight 4.2 mm holes provide good flow and uniform coverage; however, increased viscosity or heavy additives will raise flow resistance and may reduce jet strength and distribution uniformity. - Operating pressure up to 2 bar helps compensate for some increased viscosity; if viscosity/additives significantly thicken the fluid, higher pressure or larger orifices would be needed to preserve the same flow rate and spray pattern. - The acetal construction is chemically resistant and durable, so typical coolant additives won’t harm the nozzle, but extremely aggressive chemicals should be vetted against acetal compatibility. - Temperature tolerance up to +65°C supports many coolant applications, though high-temperature fluids can change viscosity and affect performance. - Recommendation: test the specific coolant/additive formulation at intended pressure and temperature. For very high-viscosity fluids, consider lower-viscosity dilution, increased system pressure, or a nozzle with larger bore sizes to ensure consistent flow and coverage.

Nozzle 90° flat with holes for coolant, system 1/2″, JETON

Air and water hoses, All products/

Additional information

Nozzle 90° flat with holes for hoses for coolant JETON – system 1/2″. 8 holes o diameter 4.2 mm. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JT-84446	Nozzle 90° flat with holes 8x4.2 mm (system 1/2")	-	2	In stock	0 €		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Nozzle 90° flat with holes for hoses for coolant JETON – system 1/2″. 8 holes o diameter 4.2 mm. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.