Is the LAUX 42 Lever Connector Tee Plug-Socket with BSP Male Thread, Carbon Steel, KGT suitable for use with food-grade grains and flour?

Yes — the LAUX 42 Lever Connector Tee Plug-Socket with BSP Male Thread, Carbon Steel, KGT can be suitable for use with food-grade grains and flour, with conditions. Reasons it can be suitable: - Material and construction: durable galvanized carbon steel provides mechanical strength and resistance to wear during bulk handling of dry solids like grains and flour. - Sealing and tightness: standard EPDM gasket gives reliable vacuum- and pressure-tight performance (useful to prevent leaks and contamination during transport/unloading). - Operating range: wide temperature tolerance (-50°C to +120°C) and robust pressure ratings make it capable in typical handling and pneumatic conveying systems. Conditions and caveats: - Food-contact compliance: galvanization and EPDM may not meet specific food-contact certifications (e.g., FDA, EU 1935/2004, or local food-safety standards). Verify coating and gasket material certifications for direct food contact. - Contamination risk: galvanized surfaces can flake or corrode over time in certain conditions; for long-term direct contact with foodstuffs, stainless steel or food-grade coatings are often preferred. - Seal selection: for media-sensitive applications, choose an approved seal compound (food-grade alternative to standard EPDM) if required. - Cleaning and hygiene: assess ease of cleaning and potential for product build-up; ensure the connector design allows required cleaning/disinfection procedures. Recommendation: confirm material and gasket certifications for food contact with the manufacturer or supplier; if certifications are lacking, consider food-grade alternatives (e.g., stainless steel and FDA-compliant seals).

Can the LAUX 42 Lever Connector Tee Plug-Socket with BSP Male Thread, Carbon Steel, KGT be used with corrosive chemicals or only with agricultural bulk materials?

The LAUX 42 Lever Connector Tee Plug-Socket with BSP Male Thread, Carbon Steel, KGT can be used with corrosive chemicals only if a seal material compatible with those chemicals is selected and the chemical is compatible with galvanized carbon steel. Standard unit uses an EPDM gasket (suitable mainly for water, some acids/alkalis and alcohols) and the body is galvanized carbon steel, which resists general corrosion but is not suitable for many aggressive chemicals (strong acids, chlorides, sulfates, oxidizers, or halogenated solvents) that can attack the zinc coating or base steel. For corrosive media you must: - Specify a chemically compatible seal (e.g., FKM/Viton, PTFE, or others as appropriate). - Confirm the chemical compatibility of galvanized carbon steel for your specific media, concentration and temperature, or consider alternative materials (stainless steel, special coatings). - Verify operating temperature and pressure under chemical exposure. If unsure, provide the exact chemical, concentration and operating conditions so compatibility can be confirmed.

Tee lever coupling LAUX 42 socket-plug with a male BSP thread, steel carbon, KGT

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)

Tee lever coupling LAUX 42 socket-plug with thread external BSP with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. When selecting coupling for medium other than water should pay attention attention on correct selection material the gasket. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: od -50°C up to +120°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TF-KGT-048-100	Tee KGT socket-plug 48 mm, 1" male, galvanized steel	-	12.5	In stock	Enquiry
TF-KGT-048-150	Tee KGT socket-plug 48 mm, 1.1/2" male, galvanized steel	-	12.5	In stock	Enquiry
TF-KGT-076-100	Tee KGT socket-plug 76 mm, 1" male, galvanized steel	-	12.5	In stock	Enquiry
TF-KGT-076-250	Tee KGT socket-plug 76 mm, 2.1/2" male, galvanized steel	-	12.5	In stock	Enquiry
TF-KGT-076-300	Tee KGT socket-plug 76 mm, 3" male, galvanized steel	-	12.5	In stock	Enquiry
TF-KGT-102-100	Tee KGT socket-plug 102 mm, 1" male, galvanized steel	-	12.5	In stock	Enquiry
TF-KGT-102-300	Tee KGT socket-plug 102 mm, 3" male, galvanized steel	-	12.5	In stock	Enquiry
TF-KGT-102-400	Tee KGT socket-plug 102 mm, 4" male, galvanized steel	-	12.5	In stock	Enquiry
TF-KGT-133-400	Tee KGT socket-plug 133 mm, 4" male, galvanized steel	-	12.5	In stock	Enquiry
TF-KGT-152-400	Tee KGT socket-plug 152 mm, 4" male, galvanized steel	-	12.5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Tee lever coupling LAUX 42 socket-plug with thread external BSP with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. When selecting coupling for medium other than water should pay attention attention on correct selection material the gasket. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: od -50°C up to +120°C.