Can Metric Tube End 90° Elbow ZMR212, Heavy Series, AISI 316L Stainless Steel be used with standard crimp sleeves for my hydraulic hose type?

Metric Tube End 90° Elbow ZMR212, Heavy Series, AISI 316L Stainless Steel Format No — Metric Tube End 90° Elbow ZMR212 is intended to be crimped with a dedicated sleeve matched to the specific hose type, not with generic or standard crimp sleeves. The product description states it uses a cutting ring (BES) sealing system and explicitly requires a sleeve that corresponds to the hose construction and dimensions to ensure a precise, safe, pressure-rated assembly. Using an incorrect or standard sleeve risks improper sealing, loss of pressure integrity, premature failure and voiding warranties. For safe use, consult the hose manufacturer’s recommended sleeve specification or the fitting supplier’s compatibility chart and use the matching dedicated sleeve and correct crimping procedure.

Is the Metric Tube End 90° Elbow ZMR212, Heavy Series, AISI 316L Stainless Steel compatible with non-metric tubing standards or adapters?

Metric Tube End 90° Elbow ZMR212, Heavy Series, AISI 316L Stainless Steel Format — The fitting is specifically designed for metric tubes and uses a cutting ring (BES) sealing system and a crimped sleeve matched to the hose type. Because of this, it is not directly compatible with non-metric tubing standards without appropriate adapters. To use non-metric tubing you would need a proper adapter or transition fitting that converts the non-metric thread or tube size to the metric cutting-ring connection; attention must be paid to maintaining the same sealing principle (cutting ring) and to pressure ratings and material compatibility. Incorrect adapters or improvised connections can compromise seal integrity, pressure performance and corrosion resistance. For safe and reliable operation, select certified adapters sized for the specific non-metric standard and verify combined pressure ratings and material (preferably AISI 316L or compatible) before assembly.

A fitting tubular metric BES 90°, type ZMR212, series heavy, steel AISI 316L

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel
Standard length [m]	50

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with tube metric, sealing a ring cutting (BES), angled 90° series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMR212-10-04-SS	Fitting 90° tube 10 mm, hose 1/4", heavy, AISI 316L	6	-	In stock	Enquiry
TI-ZMR212-12-05-SS	Fitting 90° tube 12 mm, hose 5/16", heavy, AISI 316L	8	-	In stock	Enquiry
TI-ZMR212-14-06-SS	Fitting 90° tube 14 mm, hose 3/8", heavy, AISI 316L	10	-	In stock	Enquiry
TI-ZMR212-14-08-SS	Fitting 90° tube 14 mm, hose 1/2", heavy, AISI 316L	12	-	In stock	Enquiry
TI-ZMR212-16-08-SS	Fitting 90° tube 16 mm, hose 1/2", heavy, AISI 316L	12	-	In stock	Enquiry
TI-ZMR212-20-10-SS	Fitting 90° tube 20 mm, hose 5/8", heavy, AISI 316L	16	-	In stock	Enquiry
TI-ZMR212-20-12-SS	Fitting 90° tube 20 mm, hose 3/4", heavy, AISI 316L	20	-	In stock	Enquiry
TI-ZMR212-25-12-SS	Fitting 90° tube 25 mm, hose 3/4", heavy, AISI 316L	20	-	In stock	Enquiry
TI-ZMR212-30-16-SS	Fitting 90° tube 30 mm, hose 1", heavy, AISI 316L	25	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with tube metric, sealing a ring cutting (BES), angled 90° series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.