Is the Carbon Steel MFALP Crimped End with GZ and GW compatible with all Teflon brake hose sizes and fittings?

The Carbon Steel MFALP Crimped End with GZ and GW is designed specifically for use with Teflon brake hoses and provides secure, high‑pressure‑rated connections thanks to its precise threading and robust crimped construction. However, it is not automatically compatible with all Teflon brake hose sizes and fittings. Compatibility depends on matching the MFALP’s thread types (GZ external and GW internal), thread sizes, and the hose end dimensions to the specific Teflon hose and fitting specifications. Before installation, verify: - thread type and size match between the MFALP and the mating fitting, - inner/outer hose diameters and ferrule/crimp dimensions are suitable for the MFALP crimp profile, - pressure ratings of hose, fitting and crimp are compatible, - any manufacturer installation instructions and torque/spec requirements are followed. If in doubt, consult the hose or fitting manufacturer’s compatibility charts or provide exact hose/fitting dimensions to confirm fit.

Does the Carbon Steel MFALP Crimped End with GZ and GW require special tools or crimping procedures for installation on Teflon brake hoses?

Carbon Steel MFALP Crimped End with GZ and GW: No special or proprietary tools are required beyond standard crimping equipment appropriate for Teflon (PTFE) brake hose assemblies. Because the fitting is a crimped end designed specifically for Teflon brake hoses and made from carbon steel with precise threads, installation should follow typical professional procedures: - Use a certified hydraulic or mechanical crimping tool with the correct die set sized for the MFALP outer diameter to ensure uniform compression and a secure mechanical connection. - Verify die profile and crimp dimensions recommended for Teflon brake hose assemblies to achieve the specified crimp geometry and avoid damage to the hose. - Ensure the hose is clean, cut square, and properly inserted so the internal and external threads align for a leak‑free seal. - Apply industry standard torque to threaded connections where specified; inspect for proper seating and absence of gaps. - Perform pressure and leak testing after crimping to confirm integrity. In summary, standard professional crimping tools and correct dies/procedures for Teflon brake hoses are sufficient—no unique or special proprietary tools are required beyond those.

Crimped fitting with male thread and female, type MFALP, steel carbon

All products, Brake hoses and fittings/

Additional information

Material	CS – steel (cast iron)

Crimped fitting with thread external and thread internal, type MFALP, for hoses brake PTFE. Material: carbon steel, chrome-plated.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RK-MFALP-0N	Fitting M16x1.5 male / M10x1.25 female, steel. chrome-plated	3	-	In stock	Enquiry
RK-MFALP-1N	Fitting M16x1.5 male / M10x1 female, chrome-plated steel	3	-	In stock	Enquiry
RK-MFALP-2N	Fitting M16x1.5 male / 3/8"-24 female, chrome-plated steel	3	-	In stock	Enquiry