Can the Mini Pneumatic 3/2 Split Valve, Mechanical, VME Series be used in automated systems with cycle rates above 200 cycles/min without reducing service life?

Mini Pneumatic 3/2 Split Valve, Mechanical, VME Series can be used in automated systems with cycle rates above 200 cycles/min without reducing service life? Yes — the Mini Pneumatic 3/2 Split Valve, Mechanical, VME Series is suitable for high-cycle automated systems. Its robust construction (aluminum body, nickel‑plated brass push rod, stainless‑steel springs, NBR seals) and low actuation force (8 N) support reliable, repeated actuation. The valve’s 60 l/min nominal flow at 6 bar and operating pressure range 0.5–10 bar ensure stable performance under typical pneumatic loads, and its mechanical design and multiple actuation options (push rod, panel mount, lever variants) allow proper integration to minimize impact loads and wear. However, actual service life at >200 cycles/min depends on application specifics: actuation stroke length and speed, mounting orientation, supply air quality (lubrication, filtration, moisture/contaminants), pressure peaks, and duty cycle (continuous vs. intermittent). To maximize life at high cycle rates, ensure clean, dry, regulated air, proper mounting and alignment, and consider periodic inspection or preventive replacement intervals. If the application involves extreme temperatures, high shock, or continuous near‑limit duty, validate with endurance testing or consult the manufacturer for cycle‑life data.

Mini Pneumatic 3/2 Split Valve, Mechanical, VME Series

Q: What are the mounting and connection options for the Mini Pneumatic 3/2 Split Valve, Mechanical, VME Series?

The Mini Pneumatic 3/2 Split Valve, Mechanical, VME Series offers flexible mounting and connection options to suit varied installations. Mounting: the valve can be mounted in any position and supports multiple mechanical actuation methods—push rod, panel-mounted push rod, lever with roller, or lever with single-acting roller—allowing straightforward integration into panels, frames or machinery. Connections: available with threaded GW M5 port or plug-in tube connections Ø4 and Ø6, each offered in axial or side-mounted orientations for convenient tubing routing and space-saving layouts.

All products, Pneumatic valves/

Additional information

Maximum operating temperature [°C]	60
Minimum operating temperature [°C]	-10
Standard length [m]	15

The mini mushroom valve is a compact and versatile solution designed for precise control of actuator operations, offering reliable performance in a wide range of pneumatic applications. Its mechanical actuation requires only minimal force, ensuring smooth and effortless operation. With a 3/2 NO and NC function, it provides three flow paths and two positions, making it highly adaptable to different system requirements. The valve can be mounted in any position and is available with convenient connections: GW M5 as well as plug-in options Ø4 and Ø6, either axial or side-mounted. Various actuation methods are possible, including push rod, panel-mounted push rod, lever with roller, or lever with single-acting roller, giving flexibility in integration. Built from durable materials such as an aluminum body, nickel-plated brass push rod, NBR sealing, and stainless-steel springs, it guarantees long-lasting reliability even under demanding conditions. With a nominal flow rate of 60 l/min at 6 bar, an actuation force of just 8 N, and an operating pressure range from 0.5 to 10 bar, this valve ensures efficiency and precision. Designed to perform in temperatures from -10°C to +60°C, it is the ideal choice for industries seeking compact, robust, and easy-to-install pneumatic components that deliver consistent results.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
MW-W3501000100	VME1 valve, 3/2 NC, actuator, 2 x 4 mm hose	-	10
MW-W3501000101	VME1 valve, 3/2 NO, actuator, 2 x 4 mm hose	-	10
MW-W3501000110	VME1 valve, 3/2 NO, actuator, 2 x G thread M5	-	10
MW-W3501000111	VME1 valve, 3/2 NC, actuator, 2 x G thread M5	-	10
MW-W3501000130	VME1 valve, 3/2 NO, actuator, 2 x 6 mm hose	-	10
MW-W3501000131	VME1 valve, 3/2 NC, actuator, 2 x 6 mm hose	-	10
MW-W3501000200	VME1 valve, 3/2 NC, lever with roller, 2 x 4 mm hose	-	10
MW-W3501000201	VME1 valve, 3/2 NO, lever with roller, 2 x 4 mm hose	-	10
MW-W3501000210	VME1 valve, 3/2 NO, lever with roller, 2 x G thread M5	-	10
MW-W3501000211	VME1 valve, 3/2 NC, lever with roller, 2 x G thread M5	-	10
MW-W3501000300	VME1 valve, 3/2 NC, lever with pivoting roller, 2 x 4 mm hose	-	10
MW-W3501000311	VME1 valve, 3/2 NC, lever with pivoting roller, 2 x G thread M5	-	10
MW-W3501000400	VME1 valve, 3/2 NC, panel-mounted, push-button, 2 x 4 mm hose	-	10
MW-W3501000411	VME1 valve, 3/2 NC, panel-mounted, push button, 2 x G1/8 M5	-	10
MW-W3501001100	VME2 valve, 3/2 NO, actuator, 2 x 4 mm hose from the side	-	10
MW-W3501001101	VME2 valve, 3/2 NC, actuator, 2 x 4 mm hose on the side	-	10
MW-W3501001110	VME2 valve, 3/2 NO, actuator, 2 x G-thread M5 on the side	-	10
MW-W3501001111	VME2 valve, 3/2 NC, actuator, 2 x G1/8 M5 on the side	-	10
MW-W3501001200	VME2 valve, 3/2 NO, lever with roller, 2 x 4 mm hose on the side	-	10
MW-W3501001201	VME2 valve, 3/2 NC, lever with roller, 2 x 4 mm hose on the side	-	10
MW-W3501001210	VME2 valve, 3/2 NO, lever with roller, 2 x G1/8 on the side	-	10
MW-W3501001211	VME2 valve, 3/2 NC, lever with roller, 2 x G1/8 on the side	-	10
MW-W3501001301	VME2 valve, 3/2 NC, lever with pivot roller, 2 x 4 mm hose on the side	-	10
MW-W3501001311	VME2 valve, 3/2 NC, lever with pivoting roller, 2 x G M5 on the side	-	10
MW-W3501001401	VME2 valve, 3/2 NC, panel-mounted, push rod, 2 x 4 mm hose on the side	-	10
MW-W3501001411	VME2 valve, 3/2 NC, panel-mounted, push rod, 2 x G M5 on the side	-	10

The mini mushroom valve is a compact and versatile solution designed for precise control of actuator operations, offering reliable performance in a wide range of pneumatic applications. Its mechanical actuation requires only minimal force, ensuring smooth and effortless operation. With a 3/2 NO and NC function, it provides three flow paths and two positions, making it highly adaptable to different system requirements. The valve can be mounted in any position and is available with convenient connections: GW M5 as well as plug-in options Ø4 and Ø6, either axial or side-mounted. Various actuation methods are possible, including push rod, panel-mounted push rod, lever with roller, or lever with single-acting roller, giving flexibility in integration. Built from durable materials such as an aluminum body, nickel-plated brass push rod, NBR sealing, and stainless-steel springs, it guarantees long-lasting reliability even under demanding conditions. With a nominal flow rate of 60 l/min at 6 bar, an actuation force of just 8 N, and an operating pressure range from 0.5 to 10 bar, this valve ensures efficiency and precision. Designed to perform in temperatures from -10°C to +60°C, it is the ideal choice for industries seeking compact, robust, and easy-to-install pneumatic components that deliver consistent results.