Hose thermoplastic non-conductive FP17051 NON CONDUCTIVE
Light, flexible hose intended for oil installation hydraulic, fuels, liquids based on water. Do use in the vicinity transformers and installation electric medium and high voltage. Non-conductive – leakage under the standard’s test conditions lower than 50 µA for a voltage of 246 kV/m over 5 min. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 157 bar to 220 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water up to +65°C).
List of product variants
Do you need a larger quantity of products or a bespoke quote?
Light, flexible hose intended for oil installation hydraulic, fuels, liquids based on water. Do use in the vicinity transformers and installation electric medium and high voltage. Non-conductive – leakage under the standard’s test conditions lower than 50 µA for a voltage of 246 kV/m over 5 min. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 157 bar to 220 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water up to +65°C).
Additional information
| Material | PEE – polyester |
|---|---|
| Maximum operating temperature [°C] | 93 |
| Minimum operating temperature [°C] | -40 |
| Vacuum resistance | check |















