How do I install the ACP engine oil level sensor to ensure accurate readings and avoid interference from tank walls or magnetic fields?

To install the ACP engine oil level sensor for accurate readings and to avoid interference: 1. Mounting location: install the ACP engine oil level sensor at the upper part of the tank so the float can move freely with the oil surface. Keep the sensor at least 50 mm away from tank walls to prevent mechanical interference. 2. Avoid magnetic interference: position the sensor away from magnets, magnetic devices or strong electromagnetic fields to prevent signal distortion. 3. Mounting method: use the threaded connection or flange holes provided. Ensure the aluminum mounting flange sits flush and the rubber gasket seals properly to maintain IP65 protection. 4. Alignment and guide: verify the stainless steel tube guide is straight and unobstructed so the float travels smoothly between its min and max positions. 5. Electrical limits: connect within the sensor’s rated load (max 48V AC/DC, 0.5 A) and follow correct polarity and grounding practices to avoid electrical noise. 6. Environmental checks: confirm ambient temperature stays within -10°C to +90°C and that the installation area is free from heavy contamination or water ingress. 7. Final test: after installation, cycle the tank through min–max levels and observe sensor output to confirm accurate switching and no false triggers from wall contact or magnetic fields. Following these steps will ensure reliable, long-lasting operation of the ACP engine oil level sensor.

Can the ACP engine oil level sensor be used in tanks with high vibration or tilted installations, and what mounting adjustments are recommended?

Yes — the ACP engine oil level sensor can be used in tanks subject to vibration or slight tilting, but correct mounting and placement are important to ensure reliable operation. Recommended mounting adjustments: - Mount the sensor at the upper part of the tank (as intended) so the float can freely follow the oil surface. - Keep the sensor at least 50 mm away from tank walls to avoid interference with float movement caused by wall proximity. - Avoid mounting near sources of magnetic fields which could disturb the sensor’s signal. - Use the provided threaded connection or flange holes for secure installation; a solid mechanical connection reduces the effect of vibration. - Ensure the flange and guide (aluminum flange and stainless steel tube) are tightly fastened and sealed with the rubber gasket to prevent ingress and loosening under vibration. - If the tank is significantly tilted or experiences heavy vibration, add mechanical damping or a reinforced mounting bracket to minimize relative movement and shock to the sensor. - Verify the installation maintains the sensor within its operating temperature range (-10°C to +90°C) and electrical limits (max 48V AC/DC, 0.5 A). With these adjustments the ACP engine oil level sensor will provide reliable level detection even in demanding, vibrating or slightly tilted installations.

ACP engine oil level sensor

All products, Other high-pressure accessories/

Additional information

Material	AL – aluminum

The level sensor is designed for precise monitoring of liquid levels in tanks, ensuring reliable operation in demanding industrial environments. Mounted at the upper part of the tank, it features a float that moves with the oil surface and provides a clear signal when the liquid reaches its maximum or minimum level. The device can be installed easily using either a threaded connection or flange holes, with optimal performance achieved when positioned at least 50 mm from the tank walls and away from magnetic fields. Built from durable materials such as an aluminum mounting flange, stainless steel tube guide, and a rubber gasket, the sensor guarantees long-lasting resistance to wear and external factors. With an IP65 protection rating, it is safeguarded against dust and water, while its wide operating temperature range from -10°C to +90°C allows for versatile use in various applications. Supporting a maximum load of 48V AC/DC and 0.5 A, this sensor combines safety, durability, and efficiency, making it an excellent choice for industries seeking dependable liquid level control.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AH-ACP-150	Oil level sensor, L=150 mm, max. 30V	-	-	In stock	Enquiry
AH-ACP-200	Oil level sensor, L=200 mm, max. 30V	-	-	In stock	Enquiry
AH-ACP-250	Oil level sensor, L=250 mm, max. 30V	-	-	In stock	Enquiry
AH-ACP-300	Oil level sensor, L=300 mm, max. 30V	-	-	In stock	Enquiry
AH-ACP-350	Oil level sensor, L=350 mm, max. 30V	-	-	In stock	Enquiry
AH-ACP-400	Oil level sensor, L=400 mm, max. 30V	-	-	In stock	Enquiry
AH-ACP-500	Oil level sensor, L=500 mm, max. 30V	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The level sensor is designed for precise monitoring of liquid levels in tanks, ensuring reliable operation in demanding industrial environments. Mounted at the upper part of the tank, it features a float that moves with the oil surface and provides a clear signal when the liquid reaches its maximum or minimum level. The device can be installed easily using either a threaded connection or flange holes, with optimal performance achieved when positioned at least 50 mm from the tank walls and away from magnetic fields. Built from durable materials such as an aluminum mounting flange, stainless steel tube guide, and a rubber gasket, the sensor guarantees long-lasting resistance to wear and external factors. With an IP65 protection rating, it is safeguarded against dust and water, while its wide operating temperature range from -10°C to +90°C allows for versatile use in various applications. Supporting a maximum load of 48V AC/DC and 0.5 A, this sensor combines safety, durability, and efficiency, making it an excellent choice for industries seeking dependable liquid level control.