Is the Polyurethane Hose P7 M STREET for Road Sweepers resistant to oils, gasoline, microbes and hydrolysis while remaining flexible down to -40°C?

Yes. The Polyurethane Hose P7 M STREET for Road Sweepers is resistant to oils, gasoline, microbes and hydrolysis while remaining flexible down to −40°C.

Can the Polyurethane Hose P7 M STREET for Road Sweepers maintain flexibility and performance after prolonged exposure to abrasive materials like sand, gravel and debris?

Yes. The Polyurethane Hose P7 M STREET for Road Sweepers is specifically engineered to retain flexibility and performance after prolonged exposure to abrasive materials like sand, gravel and debris. Key reasons: - Thick, abrasion-resistant wall (1.4 mm) and polyether-based polyurethane construction provide excellent wear resistance and elasticity, even at low temperatures. - Outward-turning folds between the steel wire spiral reduce flow resistance and concentrate wear externally, extending service life under intensive suction of abrasive loads. - Smooth interior and low compressibility preserve suction efficiency and prevent clogging or material buildup. - Resistance to oils, gasoline, microbes and hydrolysis ensures material integrity in harsh environments. - Very small bending radius (1.2 × D) maintains flexibility in tight installations without compromising durability. - Wide operating temperature range (–40°C to +100°C, peaks to +125°C) ensures consistent performance across extreme conditions. Overall, Polyurethane Hose P7 M STREET for Road Sweepers offers reliable long-term flexibility and abrasion performance for municipal sweepers and professional cleaning equipment.

Hose polyurethane for sweepers road P7 M STREET

All products, Ducting and ventilation hoses/

Additional information

Material	PU – polyurethane
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	yes
Standard length [m]	10, 50
Reinforcement	steel spiral

Strong, thick, flexible hose intended for extraction and conveying materials abrasive: sand, gravel, rubbish, leaves and other contaminants. intended for use in cleaning streets, squares and ways. used in sweepers and other equipment services municipal and road. special The design hose P7 M STREET makes, that despite high wall thickness wall (1.4 mm) hose has smaller radius bends (1.2 x D) than standard hoses o tej wall thickness. folds hose between spiral at bending fold over on outside, co reduces resistance flow and wear. pliable, little compressible, smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Wall thickness measured between the spiral. assembly on spigots hose clamps bridge (right-handed). Other diameters may be available on special order. Hose material: transparent and black polyether – polyurethane. Wall thickness: 1.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
SC-P7M-STREET-181	Hose P7 M STREET 181.5 mm	180	0.3	In stock	Enquiry
SC-P7M-STREET-190	Hose P7 M STREET 190 mm	180	0.3	In stock	Enquiry
SC-P7M-STREET-200	Hose P7 M STREET 200 mm	200	0.3	In stock	Enquiry
SC-P7M-STREET-205	Hose P7 M STREET 205 mm	200	0.3	In stock	Enquiry
SC-P7M-STREET-250	Hose P7 M STREET 250 mm	250	0.25	In stock	Enquiry
SC-P7M-STREET-257	Hose P7 M STREET 257 mm	250	0.25	In stock	Enquiry
SC-P7M-STREET-300	Hose P7 M STREET 300 mm	300	0.2	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Strong, thick, flexible hose intended for extraction and conveying materials abrasive: sand, gravel, rubbish, leaves and other contaminants. intended for use in cleaning streets, squares and ways. used in sweepers and other equipment services municipal and road. special The design hose P7 M STREET makes, that despite high wall thickness wall (1.4 mm) hose has smaller radius bends (1.2 x D) than standard hoses o tej wall thickness. folds hose between spiral at bending fold over on outside, co reduces resistance flow and wear. pliable, little compressible, smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Wall thickness measured between the spiral. assembly on spigots hose clamps bridge (right-handed). Other diameters may be available on special order. Hose material: transparent and black polyether – polyurethane. Wall thickness: 1.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).

Additional information

Material	PU – polyurethane
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	yes
Standard length [m]	10, 50
Reinforcement	steel spiral