Is the Pipe Clamp with DÄMMGULAST® Anti-Vibration Insert, Galvanized Steel suitable for use on plastic pipes and in suspended installations?

Yes. The Pipe Clamp with DÄMMGULAST® Anti-Vibration Insert, Galvanized Steel is suitable for use on plastic pipes and for suspended installations. Its welded two-stage head with M8/M10 thread allows secure installation in vertical, horizontal or suspended positions, and the EPDM rubber insert is compatible with plastic (as well as steel, cast iron, and copper) while providing vibration and noise reduction, abrasion and temperature resistance, and long-term aging stability.

Can the Pipe Clamp with DÄMMGULAST® Anti-Vibration Insert, Galvanized Steel be used in high-temperature or steam applications?

Pipe Clamp with DÄMMGULAST® Anti-Vibration Insert, Galvanized Steel — Short answer: Yes, with limitations. Details: The clamp’s EPDM DÄMMGULAST® insert is specifically noted for excellent resistance to temperature fluctuations and aging, making the product suitable for many heating and hot-water pipe applications. The galvanized carbon steel clamp body and robust two-stage head (M8/M10) are designed for demanding installations including heating systems. However, the description does not specify exact maximum continuous temperatures, steam compatibility, or pressure/steam-phase chemical resistance. Steam applications (especially saturated or high-pressure steam) typically require materials rated for higher continuous temperatures and specific steam-compatible elastomers (e.g., silicone or fluorosilicone) rather than standard EPDM. Recommendation: Use for hot-water and heating systems is acceptable. For high-temperature steam service, consult the manufacturer for maximum service temperature, steam compatibility of the EPDM insert, and any applicable certifications or special versions rated for steam. If steam temperatures/pressures exceed EPDM limits, choose a steam-rated clamp or an insert material certified for steam.

A clamp tubular with insert anti-vibration DÄMMGULAST®, steel galvanized

Additional information

Material	CS – steel (cast iron)

High quality, strong two-part A clamp steel for large loads dynamic with insert anti-vibration DÄMMGULAST® and two screws closing secured washers with plastic against falling out during tightening. screws enable adjustments in order to adjustment for greater changes diameter tubes. insert anti-vibration with yellow stripe identification (medium improvement level sound for 22 dB(A) ) made is with rubber EPDM resistant to water, abrasion, changes temperatures and aging. On one with parts clamp welding is two-stage head of size thread M8/M10. A clamp It is intended for mounting in system vertical, horizontal or suspended all kinds pipes: steel, cast iron, copper, plastic. tested solution in installations water-sewer, at construction installation heating, gas, ventilation, air-conditioning, in buildings residential and industrial. A clamp distinguished mark quality “Gütezeichen Rohrbefestigung” for size ≤200 mm and is subjected control in accordance with instructions RAL-male 655-B. products of mark quality RAL must entirely meet rigorous requirements compliant of standards requirements contained in RAL male 655. A clamp tested under relative to safety fire for size ≤170 mm (RAL-male 656). Material clamp: steel carbon, galvanized (W1). Material insert: EPDM.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AB-PCDY-014-020-W1	Clamp for tubes 14÷20 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-021-026-W1	Clamp for tubes 21÷26 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-026-030-W1	Clamp for tubes 26÷30 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-031-038-W1	Clamp for tubes 31÷38 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-040-047-W1	Clamp for tubes 40÷47 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-048-054-W1	Clamp for tubes 48÷54 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-054-060-W1	Clamp for tubes 54÷60 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-060-066-W1	Clamp for tubes 60÷66 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-068-073-W1	Clamp for tubes 68÷73 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-073-080-W1	Clamp for tubes 73÷80 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-082-087-W1	Clamp for tubes 82÷87 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-087-094-W1	Clamp for tubes 87÷94 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-099-104-W1	Clamp for tubes 99÷104 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-105-112-W1	Clamp for tubes 105÷112 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-112-118-W1	Clamp for tubes 112÷118 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-122-128-W1	Clamp for tubes 122÷128 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-132-137-W1	Clamp for tubes 132÷137 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-137-142-W1	Clamp for tubes 137÷142 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-142-148-W1	Clamp for tubes 142÷148 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-149-156-W1	Clamp for tubes 149÷156 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-159-164-W1	Clamp for tubes 159÷164 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-164-169-W1	Clamp for tubes 164÷169 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry
AB-PCDY-169-172-W1	Clamp for tubes 169÷172 mm with an insert rubber, yellow pasek, M8 female/M10, W1	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

High quality, strong two-part A clamp steel for large loads dynamic with insert anti-vibration DÄMMGULAST® and two screws closing secured washers with plastic against falling out during tightening. screws enable adjustments in order to adjustment for greater changes diameter tubes. insert anti-vibration with yellow stripe identification (medium improvement level sound for 22 dB(A) ) made is with rubber EPDM resistant to water, abrasion, changes temperatures and aging. On one with parts clamp welding is two-stage head of size thread M8/M10. A clamp It is intended for mounting in system vertical, horizontal or suspended all kinds pipes: steel, cast iron, copper, plastic. tested solution in installations water-sewer, at construction installation heating, gas, ventilation, air-conditioning, in buildings residential and industrial. A clamp distinguished mark quality “Gütezeichen Rohrbefestigung” for size ≤200 mm and is subjected control in accordance with instructions RAL-male 655-B. products of mark quality RAL must entirely meet rigorous requirements compliant of standards requirements contained in RAL male 655. A clamp tested under relative to safety fire for size ≤170 mm (RAL-male 656). Material clamp: steel carbon, galvanized (W1). Material insert: EPDM.