Is the IN-LINE quick coupling set with hose end, no valve, polypropylene, SMC series DN 1.2 compatible with common inkjet and medical tubing materials?

Yes. The IN-LINE quick coupling set with hose end, no valve, polypropylene, SMC series DN 1.2 is suitable for use with common inkjet and medical tubing materials. Its design targets demanding applications including inkjet printing systems and medical blood handling. Key compatibility factors: - Materials: Body in polypropylene and EPDM O‑ring provide broad chemical resistance compatible with typical inkjet fluids and many medical-grade tubing materials (PVC, silicone, polyurethane). - Size and sealing: DN 1.2 mm nominal size and reliable EPDM seal deliver precise, leak‑free connections for small-bore tubing used in inkjet and medical devices. - Mechanical behavior: The twist‑together connection allows slight hose rotation, reducing kinking and accidental disconnection—important for flexible inkjet and medical lines. - Operating limits: Rated to 6.9 bar and 0°C to +82°C, suitable for most inkjet fluids and typical medical fluid temperatures/pressures; verify for extremes (high temperature sterilization, aggressive solvents). - Recommendation: For critical medical or specialized ink formulations, confirm chemical compatibility and regulatory requirements with tubing and fluid manufacturers; test under intended operating and sterilization conditions.

Can the IN-LINE quick coupling set with hose end, no valve, polypropylene, SMC series DN 1.2 be sterilized for use in medical blood handling applications?

The IN-LINE quick coupling set with hose end, no valve, polypropylene, SMC series DN 1.2 may be suitable for some medical blood-handling uses, but sterilizability is limited and must be validated before clinical use. Key points: - Material: polypropylene body is chemically resistant but has limited heat resistance. EPDM O‑ring resists many chemicals but can degrade under some sterilization methods. - Recommended sterilization constraints: the specified temperature range (0°C to +82°C) rules out standard autoclaving (steam sterilization at ≈121°C). Dry heat sterilization at high temperatures is also unsuitable. - Potential sterilization options: low-temperature methods such as ethylene oxide (EtO) or validated low-temperature hydrogen peroxide plasma/VHP processes may be compatible, but compatibility with polypropylene and EPDM must be confirmed with supplier data and process validation. - Biological and functional validation: any sterilization method must be qualified to ensure microbial reduction, no leachables or residues harmful to blood, and preserved mechanical sealing and connection integrity under up to 6.9 bar and rotational/hose movement. - Regulatory and safety: for medical blood handling, use only after vendor confirmation of medical-grade materials and sterilization compatibility, plus internal risk assessment and validation per applicable standards and regulations. Conclusion: The coupling cannot be autoclaved; low-temperature sterilization may be possible but requires supplier confirmation and full sterilization and biocompatibility validation before use in blood-handling medical applications.

Set quick coupling IN-LINE with fitting for hose, without valve, polypropylene, series SMC DN 1.2

All products, Industrial plastic quick couplings/

Additional information

Material	P – material (plastic)

Set quick coupling without valve – socket and plug with fitting for hose intended for printing installation inkjet, blood, liquids cooling, chromatography gas, etc. connection consists in on turning relative to each other two parts coupling. coupling to also allows on light rotation connected hose, co prevents its twisting and accidental disconnection. nominal size quick coupling: DN 1.2 mm. length L – length total. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 6.9 bar. Operating temperature: od 0°C up to +82°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
CC-SMX-10-PP	Set IN-LINE SMC DN1.2 1/16", without valve, polypropylene	-	6.9	In stock	0 €		Enquiry
CC-SMX-11-PP	Set IN-LINE SMC DN1.2 1/8", without valve, polypropylene	-	6.9	In stock	0 €		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Set quick coupling without valve – socket and plug with fitting for hose intended for printing installation inkjet, blood, liquids cooling, chromatography gas, etc. connection consists in on turning relative to each other two parts coupling. coupling to also allows on light rotation connected hose, co prevents its twisting and accidental disconnection. nominal size quick coupling: DN 1.2 mm. length L – length total. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 6.9 bar. Operating temperature: od 0°C up to +82°C.