Hose PTFE and antistatic thick wall, in single braid steel AISI 304, SMOOTHBORE HWSB

Additional information

Material

PTFE – teflon and similar

Maximum operating temperature [°C]

260

Minimum operating temperature [°C]

-70

Vacuum resistance

no

Standard length [m]

152.4

Reinforcement

steel braid

Hose made is with smooth, seamless tube with PTFE. PTFE tube hose extruded is in strictly defined and controlled conditions, co ensures jej highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. version thick-walled HW recommended is for heavier conditions use, gases (up to 100 bar) and for applications in which available cyclic changes temperatures use. braid made is with annealed wire of steel stainless AISI 304 o high strength on stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose under high pressure. Due to unique properties PTFE (large range temperatures use, resistance to most substances and compounds chemical, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water etc. – as well as for classic installation high-pressure oil hydraulic. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1, if required is factor 4:1 (e.g. acc. to EN 16643) should multiply value through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% on each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-HWSB-06 is: 260 bar – (170°C-130°C) x 0.75 = 260 bar – 30% = 182 bar. The value “Wall thickness” given in the Technical data refers to the PTFE layer. Hose material: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 304. Working pressure: from 55 bar to 240 bar – depending on the diameter hose. Operating temperature: od -70°C up to +260°C.

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
AF-HWSB-03Hose SMOOTHBORE HWSB 1/8"3290In stock0 €
Enquiry
AF-HWSB-03ASHose SMOOTHBORE HWSB 1/8" antistatic3290In stock0 €
Enquiry
AF-HWSB-05Hose SMOOTHBORE HWSB 3/16"5270In stock0 €
Enquiry
AF-HWSB-05ASHose SMOOTHBORE HWSB 3/16" antistatic5270In stock0 €
Enquiry
AF-HWSB-06Hose SMOOTHBORE HWSB 1/4"6260In stock0 €
Enquiry
AF-HWSB-06ASHose SMOOTHBORE HWSB 1/4" antistatic6260In stock0 €
Enquiry
AF-HWSB-08Hose SMOOTHBORE HWSB 5/16"8230In stock0 €
Enquiry
AF-HWSB-08ASHose SMOOTHBORE HWSB 5/16" antistatic8230In stock0 €
Enquiry
AF-HWSB-10Hose SMOOTHBORE HWSB 3/8"10200In stock0 €
Enquiry
AF-HWSB-10ASHose SMOOTHBORE HWSB 3/8" antistatic10200In stock0 €
Enquiry
AF-HWSB-13Hose SMOOTHBORE HWSB 1/2"12160In stock0 €
Enquiry
AF-HWSB-13ASHose SMOOTHBORE HWSB 1/2" antistatic12160In stock0 €
Enquiry
AF-HWSB-16Hose SMOOTHBORE HWSB 5/8"16130In stock0 €
Enquiry
AF-HWSB-16ASHose SMOOTHBORE HWSB 5/8" antistatic16130In stock0 €
Enquiry
AF-HWSB-19Hose SMOOTHBORE HWSB 3/4"2092In stock0 €
Enquiry
AF-HWSB-19ASHose SMOOTHBORE HWSB 3/4" antistatic2092In stock0 €
Enquiry
AF-HWSB-25Hose SMOOTHBORE HWSB 1"2569In stock0 €
Enquiry
AF-HWSB-25ASHose SMOOTHBORE HWSB 1" antistatic2069In stock0 €
Enquiry

Do you need a larger quantity of products or a bespoke quote?

Hose made is with smooth, seamless tube with PTFE. PTFE tube hose extruded is in strictly defined and controlled conditions, co ensures jej highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. version thick-walled HW recommended is for heavier conditions use, gases (up to 100 bar) and for applications in which available cyclic changes temperatures use. braid made is with annealed wire of steel stainless AISI 304 o high strength on stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose under high pressure. Due to unique properties PTFE (large range temperatures use, resistance to most substances and compounds chemical, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water etc. – as well as for classic installation high-pressure oil hydraulic. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1, if required is factor 4:1 (e.g. acc. to EN 16643) should multiply value through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% on each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-HWSB-06 is: 260 bar – (170°C-130°C) x 0.75 = 260 bar – 30% = 182 bar. The value “Wall thickness” given in the Technical data refers to the PTFE layer. Hose material: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 304. Working pressure: from 55 bar to 240 bar – depending on the diameter hose. Operating temperature: od -70°C up to +260°C.

Additional information

Material

PTFE – teflon and similar

Maximum operating temperature [°C]

260

Minimum operating temperature [°C]

-70

Vacuum resistance

no

Standard length [m]

152.4

Reinforcement

steel braid

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?