Can the Stainless Steel 90° Flanged End TRICLOVER with Smooth Tail, Type TCR be used with PTFE-lined hoses and meet sanitary standards in pharma and food applications?

Yes. The Stainless Steel 90° Flanged End TRICLOVER with Smooth Tail, Type TCR is specifically designed to be compatible with PTFE-lined hoses (as well as FEP, MFA, PFA linings and UPE-reinforced hoses). Manufactured from AISI 316 stainless steel, it provides excellent corrosion resistance and meets the stringent hygiene requirements of pharmaceutical, biotechnology, cosmetic, and food industries. The product is engineered for liquid and high‑viscosity media and supports sanitary process conditions when installed correctly. Working pressure depends on hose size and clamp type (minimum 16 bar for 2" and 10 bar for larger sizes), and installation using TI-LR or TI-LDR clamp sleeves or the RS shell clamp enables secure, hygienic connections. For full compliance with specific sanitary codes (e.g., FDA, EHEDG, 3-A) and validation in your facility, verify material certifications, surface finish specifications (Ra), and perform appropriate qualification testing during installation.

Does the Stainless Steel 90° Flanged End TRICLOVER with Smooth Tail, Type TCR maintain required pressure ratings and seal integrity when used with UPE- or FEP-lined hoses under high-viscosity media?

Yes. The Stainless Steel 90° Flanged End TRICLOVER with Smooth Tail, Type TCR is explicitly designed for secure, reliable connection to UPE- or FEP-lined hoses and for handling high-viscosity media. Made from AISI 316 stainless steel, it offers corrosion resistance and hygienic suitability for pharmaceutical, biotech, cosmetic, food and chemical applications. The fitting is engineered for both liquid and high-viscosity products, and its working pressure is determined by connection size and clamp type—minimum 16 bar for 2" and 10 bar for larger sizes—ensuring adequate pressure ratings when installed correctly. Use of TI-LR or TI-LDR clamp sleeves or the RS shell clamp provides proper sealing and mechanical support to maintain seal integrity with lined hoses. Correct selection of clamp type and adherence to manufacturer installation procedures are required to achieve the stated pressure and sealing performance.

A fitting flange 90° TRICLOVER with smooth tail, steel stainless, type TCR

All products, Hygienic stainless steel couplings/

Additional information

Material	SS – stainless steel

A fitting flange 90° TRICLOVER with smooth “tail” for hoses rubber and plastic and hoses rubber with layer plastic UPE, PTFE, FEP, MFA, PFA. Do use in industry pharmaceutical, biotechnological, cosmetic, food and chemical, for media liquid and o high viscosity. pressure working is depending on the size coupling and type used clamp (co least 16 bar for size 2″, 10 bar – above 2″). assembly: ferrules clamping TI-LR, TI-LDR or using clamp shell RS. Material: steel AISI 316.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NH-TCR90-034-11-013	Fitting 90° TRICLOVER flange 34/10.7 mm for an RS clamp, hose 13 mm	12	16	In stock	Enquiry
NH-TCR90-034-16-019	Fitting 90° TRICLOVER flange 34/16 mm for an RS clamp, hose 19 mm	20	16	In stock	Enquiry
NH-TCR90-034-20-019	Fitting 90° TRICLOVER flange 34/20 mm for an RS clamp, hose 19 mm	20	16	In stock	Enquiry
NH-TCR90-050-22-019	Fitting 90° TRICLOVER flange 50.5/22.1 mm for an RS clamp, hose 19 mm	20	16	In stock	Enquiry
NH-TCR90-050-22-025	Fitting 90° TRICLOVER flange 50.5/22.1 mm for an RS clamp, hose 25 mm	25	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A fitting flange 90° TRICLOVER with smooth “tail” for hoses rubber and plastic and hoses rubber with layer plastic UPE, PTFE, FEP, MFA, PFA. Do use in industry pharmaceutical, biotechnological, cosmetic, food and chemical, for media liquid and o high viscosity. pressure working is depending on the size coupling and type used clamp (co least 16 bar for size 2″, 10 bar – above 2″). assembly: ferrules clamping TI-LR, TI-LDR or using clamp shell RS. Material: steel AISI 316.