Thermoplastic hose with a double aramid braid VE8 M
A light, flexible high-pressure hose of R8 type with a double aramid braid. Exceeds the pressure requirements of the SAE 100R8 standard. Designed for the transport of chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. The light and flexible construction eases installation. The micro-perforated outer layer is resistant to hydrolysis and microorganisms, allowing the hose to be used in humid and saline environments. Standards: SAE 100R8, ISO 3949-R8, DNV-GL. Inner layer: polyamide. Reinforcement: aramid braids. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
List of product variants
Do you need a larger quantity of products or a bespoke quote?
A light, flexible high-pressure hose of R8 type with a double aramid braid. Exceeds the pressure requirements of the SAE 100R8 standard. Designed for the transport of chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. The light and flexible construction eases installation. The micro-perforated outer layer is resistant to hydrolysis and microorganisms, allowing the hose to be used in humid and saline environments. Standards: SAE 100R8, ISO 3949-R8, DNV-GL. Inner layer: polyamide. Reinforcement: aramid braids. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
Additional information
| Material | PA – polyamide |
|---|---|
| Maximum operating temperature [°C] | 100 |
| Minimum operating temperature [°C] | -40 |
| Vacuum resistance | check |
| Reinforcement | 2 aramid braids |















