Is the Walterscheid™ BANJO WH-BE Adjustable Angle Screw Connector, Carbon Steel compatible with both 24° DIN 2353 sockets and external BSP threads in hydraulic systems?

Yes. The Walterscheid™ BANJO WH-BE Adjustable Angle Screw Connector, Carbon Steel is compatible with both a 24° DIN 2353 socket (with external metric thread) and external BSP threads. It features a 24° DIN 2353 socket and an external BSP thread, and seals per DIN 3852 type E using an elastomer gasket with rectangular cross-section, ensuring reliable sealing and compatibility with hydraulic systems using either connection type.

What maintenance is required to preserve the Guardian Seal™ galvanic coating on the Walterscheid™ BANJO WH-BE Adjustable Angle Screw Connector, Carbon Steel?

To preserve the Guardian Seal™ galvanic coating on the Walterscheid™ BANJO WH-BE Adjustable Angle Screw Connector, Carbon Steel, follow these maintenance guidelines: - Regular inspection: check fittings periodically for chips, scratches, rust spots or coating wear—especially in high-abrasion or chemically aggressive environments. - Gentle cleaning: remove dirt, grease and contaminants with a soft cloth and a mild, pH-neutral detergent; avoid abrasive pads, wire brushes or aggressive solvents that can damage the coating. - Avoid mechanical damage: prevent impact, scraping or excessive torque during installation and servicing; use proper tools and torque settings to avoid stripping or deforming threads and surfaces. - Corrosion-prone environments: after exposure to salt spray, humidity or chemicals, rinse with fresh water and dry thoroughly; consider additional local protection (e.g., compatible corrosion inhibitors) if operating in highly aggressive conditions. - Replace damaged parts: if the coating is visibly breached, flaked or deep-corroded, replace the connector to maintain system integrity; do not attempt field repairs that compromise sealing surfaces. - Storage: store fittings in a dry, clean area away from corrosive vapors and abrasive contact; keep original packaging until installation. Following these steps will help maintain the Guardian Seal™ galvanic coating’s corrosion resistance and extend the service life of the Walterscheid™ BANJO WH-BE Adjustable Angle Screw Connector, Carbon Steel.

Walterscheid™ BANJO WH-BE Adjustable Angle Screw Connector, Carbon Steel

Additional information

Material	CS – steel (cast iron)

The Eaton Walterscheid™ DIN 2353 screw-in adjustable angle BANJO fitting, type WH-BE, is a high-performance solution designed for demanding hydraulic applications. Featuring a 24° DIN 2353 socket with external metric thread and external BSP thread, it ensures reliable sealing in accordance with DIN 3852 type E through an advanced elastomer gasket with a rectangular cross-section. Engineered with a robust 4:1 safety factor, this fitting delivers exceptional durability and operational security even under high pressure. Available in LL (very light series), L (light series), and S (heavy series), it offers versatile compatibility across a wide range of system requirements. Manufactured from premium carbon steel and protected with the innovative Guardian Seal™ galvanic coating, it provides outstanding resistance to corrosion and extended service life, making it an ideal choice for industries seeking efficiency, reliability, and long-term performance.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HD-WH-04LL-BE-02-W	Walterscheid connector DIN 2353 WH 4LL 1/8" BSP	-	100	In stock	Enquiry
HD-WH-06L-BE-02-W	Walterscheid fitting DIN 2353 WH 6L 1/8" BSP	-	500	In stock	Enquiry
HD-WH-06L-BE-04-W	Walterscheid fitting DIN 2353 WH 6L 1/4" BSP	-	500	In stock	Enquiry
HD-WH-06LL-BE-02-W	Walterscheid fitting DIN 2353 WH 6LL 1/8" BSP	-	100	In stock	Enquiry
HD-WH-06S-BE-04-W	Walterscheid connector DIN 2353 WH 6S 1/4" BSP	-	500	In stock	Enquiry
HD-WH-08L-BE-04-W	Walterscheid fitting DIN 2353 WH 8L 1/4" BSP	-	500	In stock	Enquiry
HD-WH-08LL-BE-02-W	Walterscheid connector DIN 2353 WH 8LL 1/8" BSP	-	100	In stock	Enquiry
HD-WH-08S-BE-04-W	Walterscheid fitting DIN 2353 WH 8S 1/4" BSP	-	500	In stock	Enquiry
HD-WH-10L-BE-04-W	Walterscheid fitting DIN 2353 WH 10L 1/4" BSP	-	500	In stock	Enquiry
HD-WH-10S-BE-06-W	Walterscheid fitting DIN 2353 WH 10S 3/8" BSP	-	500	In stock	Enquiry
HD-WH-12L-BE-04-W	Walterscheid connector DIN 2353 WH 12L 1/4" BSP	-	400	In stock	Enquiry
HD-WH-12L-BE-06-W	Walterscheid fitting DIN 2353 WH 12L 3/8" BSP	-	400	In stock	Enquiry
HD-WH-12S-BE-06-W	Walterscheid fitting DIN 2353 WH 12S 3/8" BSP	-	400	In stock	Enquiry
HD-WH-14S-BE-08-W	Walterscheid fitting DIN 2353 WH 14S 1/2" BSP	-	400	In stock	Enquiry
HD-WH-15L-BE-08-W	Walterscheid fitting DIN 2353 WH 15L 1/2" BSP	-	400	In stock	Enquiry
HD-WH-16S-BE-08-W	Walterscheid fitting DIN 2353 WH 16S 1/2" BSP	-	400	In stock	Enquiry
HD-WH-18L-BE-08-W	Walterscheid fitting DIN 2353 WH 18L 1/2" BSP	-	400	In stock	Enquiry
HD-WH-20S-BE-12-W	Walterscheid fitting DIN 2353 WH 20S 3/4" BSP	-	315	In stock	Enquiry
HD-WH-22L-BE-12-W	Walterscheid fitting DIN 2353 WH 22L 3/4" BSP	-	250	In stock	Enquiry
HD-WH-25S-BE-16-W	Walterscheid fitting DIN 2353 WH 25S 1" BSP	-	250	In stock	Enquiry
HD-WH-28L-BE-16-W	Walterscheid fitting DIN 2353 WH 28L 1" BSP	-	250	In stock	Enquiry
HD-WH-30S-BE-20-W	Walterscheid fitting DIN 2353 WH 30S 1.1/4" BSP	-	250	In stock	Enquiry
HD-WH-35L-BE-20-W	Walterscheid fitting DIN 2353 WH 35L 1.1/4" BSP	-	250	In stock	Enquiry
HD-WH-38S-BE-24-W	Walterscheid fitting DIN 2353 WH 38S 1.1/2" BSP	-	250	In stock	Enquiry
HD-WH-42L-BE-24-W	Walterscheid fitting DIN 2353 WH 42L 1.1/2" BSP	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The Eaton Walterscheid™ DIN 2353 screw-in adjustable angle BANJO fitting, type WH-BE, is a high-performance solution designed for demanding hydraulic applications. Featuring a 24° DIN 2353 socket with external metric thread and external BSP thread, it ensures reliable sealing in accordance with DIN 3852 type E through an advanced elastomer gasket with a rectangular cross-section. Engineered with a robust 4:1 safety factor, this fitting delivers exceptional durability and operational security even under high pressure. Available in LL (very light series), L (light series), and S (heavy series), it offers versatile compatibility across a wide range of system requirements. Manufactured from premium carbon steel and protected with the innovative Guardian Seal™ galvanic coating, it provides outstanding resistance to corrosion and extended service life, making it an ideal choice for industries seeking efficiency, reliability, and long-term performance.